>

MOT History from tests of petrol CAGIVA MITOs year 1991

Review the list of common CAGIVA MITO failures below or to perform a specific mot history check on your CAGIVA then use our popular KnowYourCar service

mot history
Pass percent:51.22%
(The average a petrol CAGIVA MITO year 1991 passes without issue)
Based on:164 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment21
Rear reflector on motorcycle missing |1.4.1|11
Front wheel bearings have excessive free play |2.3.5b|8
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|8
Riders seat insecure |6.2.1a|7
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|6
Drive chain excessively loose |6.2.1d|6
Horn not working |1.7.3a|6
Offside Front shock absorber seal failed and leaking oil |2.3.3|4
Rear wheel bearings have excessive free play |2.4.A.2c|4
Front wheel bearings are excessively rough |2.3.5b|4
Offside Rear Direction indicator not working |1.5.1c|4
Drive chain worn to excess |6.2.1e|4
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|4
Front suspension has excessive stiffness in the suspension movement. |2.3.6b|3
Throttle operating incorrectly |6.2.1f|3
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||3
Front Roller brake test indicates a binding brake |3.3.A1a|3
Rear shock absorber has inadequate damping effect. |2.4.A.3b|3
Fairings insecure and likely to impede the steering |2.1.2e|3
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|3
Rear Footrest missing |6.2.1a|2
Registration plate issues2
Direction indicators not working |1.5.1c|2
Handlebar deformed |2.1.1b|2
Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b|2
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||2
Nearside Steering lock stop ineffective |2.1.3|2
Rear shock absorber seal failed and leaking oil |2.4.A.1c|2
Indicator switch insecure |1.5.4|2
Nearside Rear Direction indicator incorrect colour |1.5.1b|2
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|2
Headlamp aim headlamp deteriorated and function impaired |1.2.3a|2
Rear Rear wheel bearings have excessive free play |2.4.A.2c|2
Front shock absorber seal failed and leaking oil |2.3.3|2
Offside Front Direction indicator not working |1.5.1c|2
Exhaust is leaking and excessively noisey |7.1.1b|2
Front Stop lamp remains on when the brake is released |1.3.1e|2
Stop lamp remains on when the brake is released |1.3.1e|2
Nearside Front shock absorber seal failed and leaking oil |2.3.3|2
Nearside Handlebar deformed |2.1.1b|2
Nearside Rear Direction indicator not working |1.5.1c|2
Rear Drive chain sprocket worn to excess |6.2.1e|2
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4|2
Front Brake master cylinder insecurely mounted |3.2.B1a|2
Brake pedal is bent and the brake cannot be readily applied |3.1.3c|1
Brake pedal cracked excessive hols drilled in pedal weekend |3.1.2c|1
Exhaust mounting does not fully support the exhaust system + loos on pipe |7.1.1.c|1
Offside Rear Footrest missing |6.2.1a|1
Front Brake lever attachment screws missing |3.1.2b|1
Front Roller brake test indicates a severely grabbing brake |3.3.A1b|1
Offside Front Direction indicators not working |1.5.1c|1
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a|1
Steering headbearing has excessive free play |2.2.2|1
Front Brake lever insecure |3.1.2a|1
Offside Steering lock stop ineffective |2.1.3|1
Brake hose damaged1
Rear position lamp adversely affected by the operation of another lamp |1.1.3b|1
Front Roller brake test indicates a sticking brake |3.3.A1a|1
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c|1
Centre Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Front Brake caliper|s| insecure |3.2.A1j|1
Rear Rear reflector on motorcycle missing |1.4.1|1
Direction indicator not working |1.5.1c|1
Front Brake disc|s| excessively worn |3.2.A1l|1
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|1
Rear Brake pedal cannot be released smoothly |3.1.3d|1
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|1
Direction indicators flashing less than 60 times a minute |1.5.1c|1
Front suspension has inadequate damping effect. |2.3.6c|1
Drive chain sprocket carrier worn to excess |6.2.1e|1
Front Direction indicator flashing more than 120 times per minute |1.5.1c|1
Rear Direction indicator flashing more than 120 times per minute |1.5.1c|1
Rear position lamp insecure |1.1.1c|1
Fuel system component insecure |7.2.1b|1
Front Front suspension has inadequate damping effect. |2.3.6c|1
Steering movement excessively stiff with the wheel raised |2.2.1b|1
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a|1
Offside Handlebar deformed |2.1.1b|1
Brake rod excessively damaged |3.2.A1c|1
Nearside Front Direction indicators not working |1.5.1c|1
Offside Handlebar handgrip not secure to handlebars. |2.1.1c|1
Seat insecure |6.2.1a|1
Rear Drive chain sprocket carrier worn to excess |6.2.1e|1
Headlamp aim beam image kick-up is to the offside |1.6.1|1
Rear Brake disc|s| excessively worn |3.2.A1l|1
Fuel tank insecure |6.1.3 |a| |i||1
Fuel tank leaking excessively or a risk of fire right rear |6.1.3 |b| |ii||1
Fuel cap ineffective won, close correctly |6.1.3 |b| |i||1
Nearside Front Direction indicator not working |4.4.1 |a| |ii||1
Stop lamp not working from rear brake leaver (4.3.1 (a) (ii))1
Rear Footrest missing |6.2.12 |a||1
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Offside Rear Footrest insecure |6.2.1a|1
Headlamp dipped beam affected by the operation of another lamp |1.2.2c|1
Stop lamp affected by the operation of another lamp |1.3.2|1
Headlamp aim not tested |1.6|1
Front Fork yoke deformed |2.1.1b|1
Exhaust markings indicating not for road use or similar wording |7.1.4|1
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii||1
Front Brake cylinder severely corroded |3.2.B1b|1
Front Horn not working |1.7.3a|1
Rear Stop lamp remains on when the brake is released |1.3.1e|1
Rear Brake cylinder leaking hydraulic fluid |3.2.B1e|1
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Rear Seat insecure |6.2.1a|1
Wheel alignment incorrect which adversely affects the handling |2.5.1|1
Rear Brake performance not tested |3.3|1
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b|1
Front Brake hose fouling |3.2.B3b|1
Rear Stop lamp deteriorated and function impaired |1.3.3a|1
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b|1
Nearside Front Direction indicator not working |1.5.1c|1
Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Brake linked system has a seized master cylinder pivot. |3.2.B5|1
Steering lock stop missing |2.1.3|1
Rear suspension bush has excessive free play |2.4.A2a|i||1
Nearside Front Direction indicator missing |1.5.1a|1
Offside Front Direction indicator missing |1.5.1a|1
Nearside Rear Direction indicator missing |1.5.1a|1
Offside Rear Direction indicator missing |1.5.1a|1
Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j|1
Fuel pipe leaking |7.2.1a|1
Rear reflector on motorcycle obscured |1.4.2b|1
Offside Steering lock stop missing |2.1.3|1
Front Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c|1
Steering control handlebar movement restricted by trapped cables |2.1.2c|1
Brake disc|s| insecure |3.2.A1g|1
Brake master cylinder insecurely mounted |3.2.B1a|1
Front suspension assembly component missing |2.3.1|1
Nearside Front Upper Front shock absorber seal failed and leaking oil |2.3.3|1
Front Front shock absorber seal failed and leaking oil |2.3.3|1
Nearside Front Direction indicator affected by the operation of another lamp |1.5.1c|1
Nearside Front suspension assembly component cracked |2.3.1|1
Clutch lever shortened so it cannot be readily operated. |6.2.1g|1
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy