Most common failures | No# failures |
---|
Headlamp aim out of alignment | 25 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 19 |
Headlamp aim beam image kick up to the offside |1.6| | 18 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 17 |
Registration plate issues | 15 |
Rear reflector on motorcycle missing |1.4.1| | 15 |
Drive chain excessively loose |6.2.1d| | 13 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 12 |
Front wheel bearings have excessive free play |2.3.5b| | 11 |
Riders seat insecure |6.2.1a| | 9 |
Drive chain worn to excess |6.2.1e| | 8 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Horn not working |1.7.3a| | 8 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 7 |
Nearside Front Direction indicator not working |1.5.1c| | 7 |
Front wheel bearings are excessively rough |2.3.5b| | 6 |
Nearside Rear Footrest missing |6.2.1a| | 5 |
Offside Rear Direction indicator not working |1.5.1c| | 5 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 5 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Steering headbearing has excessive free play |2.2.2| | 5 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Direction indicators not working |1.5.1c| | 4 |
Front Front wheel bearings are excessively rough |2.3.5b| | 4 |
Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
Nearside Rear Direction indicator not working |1.5.1c| | 4 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 4 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 4 |
Offside Front Direction indicator not working |1.5.1c| | 4 |
Offside Rear Footrest missing |6.2.1a| | 3 |
Rear Footrest missing |6.2.1a| | 3 |
Front Steering headbearing has excessive free play |2.2.2| | 3 |
Nearside Steering lock stop ineffective |2.1.3| | 3 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
Rear wheel has a loose wheel nut|s| |4.2.3a| | 3 |
Rear Drive chain excessively loose |6.2.1d| | 3 |
Offside Rear Direction indicators not working |1.5.1c| | 3 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 3 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 3 |
Offside Front Direction indicator insecure |1.5.3b| | 3 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 3 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Rear Direction indicator not working |1.5.1c| | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front position lamp incorrect colour |1.1.2a| | 2 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Seat insecure |6.2.1a| | 2 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 2 |
Footrest missing |6.2.1a| | 2 |
Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 2 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Fuel system component insecure |7.2.1b| | 2 |
Fairings insecure and likely to impede the steering |2.1.2e| | 2 |
Brake pedal cannot be released smoothly |3.1.3d| | 2 |
Stop lamp remains on when the brakes are released | 2 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 2 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 2 |
Rear position lamp incorrect colour |1.1.2b| | 2 |
Headlamp aim beam image kick-up is to the offside |1.6.1| | 2 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 2 |
Rear Drive chain worn to excess |6.2.1e| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Front Direction indicator not working |1.5.1c| | 2 |
Front Headlamp aim beam image kick up to the offside |1.6| | 2 |
Rear Drive chain excessively tight |6.2.1d| | 2 |
Indicator switch insecure |1.5.4| | 1 |
Rear Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
Stop lamp does not illuminate by the operation of both brake controls front not working (4.3.2 (a) (iii)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Steering operation impeded by a fairing front brake lever hits fairing (2.1.4 (e)) | 1 |
Offside Front Direction indicator missing |1.5.1a| | 1 |
Nearside Front Direction indicator missing |1.5.1a| | 1 |
Rear Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Offside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Brake linkage clevis joint excessively worn |3.2.A1d| | 1 |
Nearside Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Offside Front Upper Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Offside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Rear Lower Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
Fuel tank insecure (6.1.3 (a) (i)) | 1 |
Brake pedal pivots excessively worn |3.1.3a| | 1 |
Fairings so located that it is likely to impede the steering |2.1.2e| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Decelerometer brake test no brake control achieves an efficiency of 30% |3.3.E1a| | 1 |
Front Direction indicator insecure |1.5.3b| | 1 |
Steering operation restricted in free movement from lock to lock |2.1.4 |c|| | 1 |
Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Rear An item not tested |Manual| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Direction indicator incorrect colour |1.5.1b| | 1 |
Front Steering lock stop maladjusted |2.1.3| | 1 |
Nearside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Rear Brake pedal is inoperative |3.1.3c| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Front Steering damper insecure |2.1.2d| | 1 |
Front Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Nearside Rear Footrest missing Pillion footrest missing (6.2.12 (a)) | 1 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Offside Lower Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Brake lever mounting insecure |3.1.2a| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Nearside Handlebar deformed |2.1.1b| | 1 |
Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Brake disc|s| insecure |3.2.A1g| | 1 |
Rear Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Nearside All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Front Front position lamp incorrect colour |1.1.2a| | 1 |
Front Brake hose fouling |3.2.B3b| | 1 |
Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Centre Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Offside Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Rear Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Headlamp aim not tested |1.6| | 1 |
Stop lamp does not illuminate immediately a brake applies front brake |1.3.1a| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Headlamp aim not tested (4.1.2 (b)) | 1 |
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Steering damper in such a condition that the steering action is impaired. |2.1.2d| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear reflector on sidecar missing |1.4.1| | 1 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Nearside Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Offside Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Indicator switch defective |1.5.4| | 1 |
Steering damper insecure |2.1.2d| | 1 |
Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Front Brake disc|s| securing bolt|s| loose |3.2.A1g| | 1 |
Offside Front Brake caliper|s| insecure |3.2.A1j| | 1 |
Nearside Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Steering lock stop maladjusted speedo cable fowls forks right lock |2.1.3| | 1 |
Steering lock stop maladjusted front brake hose fowls forks left lock |2.1.3| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts trapped between forks left lock |3.2.B2c| | 1 |
Rear Lower Rear suspension bush has excessive free play lower shock mount |2.4.A2a|i|| | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Offside Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Rear Seat insecure |6.2.1a| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front mudguard insecure |2.3.7| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Front Horn not working |1.7.3a| | 1 |
Nearside Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Stop lamp damaged and function impaired |1.3.3a| | 1 |
Rear Brake master cylinder has a seized master cylinder pivot. |3.2.B5| | 1 |