MOT History from tests of petrol BUELL XB12SSs year 2005

Review the list of common BUELL XB12SS failures below or to perform a specific mot history check on your BUELL then use our popular KnowYourCar service

mot history

Pass percent:88.69%

(The average a petrol BUELL XB12SS year 2005 passes without issue)

Based on:168 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	5
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	2
Front wheel bearings are excessively rough \|2.3.5b\|	2
Steering movement excessively stiff with the weight on the lower bearing \|2.2.1a\|	1
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	1
Rear Rear reflector on motorcycle missing \|1.4.1\|	1
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	1
Rear reflector on motorcycle missing \|1.4.1\|	1
Front Front wheel bearings have excessive free play \|2.3.5b\|	1
Registration plate lamp issues	1
Front Brake disc\|s\| is excessively distorted \|3.2.A1m\|	1
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	1
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Offside Front Shock absorber has a serious fluid leak fork seal blown (5.3.2 (b))	1
Central Rear Position lamp not working (4.2.1 (a))	1
Front Headlamp aim projected beam image obviously incorrect (4.1.2 (c))	1
Rear reflector missing (4.8.2 (a) (ii))	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	5
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	2
Front wheel bearings are excessively rough \|2.3.5b\|	2
Steering movement excessively stiff with the weight on the lower bearing \|2.2.1a\|	1
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	1
Rear Rear reflector on motorcycle missing \|1.4.1\|	1
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	1
Rear reflector on motorcycle missing \|1.4.1\|	1
Front Front wheel bearings have excessive free play \|2.3.5b\|	1
Registration plate lamp issues	1
Front Brake disc\|s\| is excessively distorted \|3.2.A1m\|	1
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	1
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Offside Front Shock absorber has a serious fluid leak fork seal blown (5.3.2 (b))	1
Central Rear Position lamp not working (4.2.1 (a))	1
Front Headlamp aim projected beam image obviously incorrect (4.1.2 (c))	1
Rear reflector missing (4.8.2 (a) (ii))	1

MOT History from tests of petrol BUELL XB12SSs year 2005

Find us on Facebook