Most common failures | No# failures |
---|
Headlamp aim out of alignment | 18 |
Horn not working |1.7.3a| | 13 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 12 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 9 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 8 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 6 |
Steering headbearing has excessive free play |2.2.2| | 6 |
Rear reflector on motorcycle missing |1.4.1| | 5 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 5 |
Front Horn not working |1.7.3a| | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Rear wheel insecure |4.2.3b| | 3 |
Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 3 |
Offside Footrest insecure |6.2.1a| | 3 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Front Brake lever insecure |3.1.2a| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Registration plate issues | 2 |
Brake lever cannot be applied smoothly |3.1.3d| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Fuel cap sealing washer missing |7.2.2c| | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
Front Footrest insecure |6.2.1a| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Rear suspension component loose |2.4.A.1a| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Nearside Footrest insecure |6.2.1a| | 2 |
Brake locking device insecure |3.2.A1e| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Nearside Front Footrest insecure |6.2.1a| | 2 |
Offside Front Footrest insecure |6.2.1a| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Brake lever cannot be released smoothly |3.1.3d| | 1 |
Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
Offside Footrest missing |6.2.1a| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Offside Steering lock stop maladjusted |2.1.3| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Headlamp has more than 1/2 LEDs not functioning |4.1.1 |a| |ii|| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Rear Brake pedal insecure |3.1.2a| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Brake back plate|s| insecure |3.2.A1j| | 1 |
Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
Nearside Rear Drive chain worn to excess |6.2.1e| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Brake lever mounting insecure |3.1.2a| | 1 |
Rear Brake lever has restricted free movement |1.1.15 |e|| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Throttle operating incorrectly not returning no normal position, and clamp loose |6.2.1f| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Brake cable badly frayed |3.2.A1b| | 1 |
Front Brake lever attachment screws loose |3.1.2b| | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Front Brake lever has restricted free movement hitting mirror (1.1.15 (e)) | 1 |
Front Brake component insecure cable to arm clevis pin missing (1.1.21 (c)) | 1 |
Front suspension assembly component missing |2.3.1| | 1 |
Rear Rear reflector on motorcycle missing Missing , replaced |1.4.1| | 1 |
Offside Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
Sidecar wheel bearings have excessive free play |5.2.3c| | 1 |
Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Headlamp deteriorated and function impaired |1.2.3a| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Offside Rear Lower Brake locking device insecure |3.2.A1e| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Rear Lower Shock absorber missing Shock absorber retaining nut missing |5.3.2 |a| |ii|| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Rear Footrest insecure |6.2.1a| | 1 |
Drive chain fouling another component |6.2.1d| | 1 |
Nearside Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Offside Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Rear Stop lamp insecure |1.3.3b| | 1 |
Brake cable has a significantly damaged outer casing. |3.2.A1b| | 1 |
Offside Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Horn not working (7.7 (a)) | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Brake pedal insecure |3.1.2a| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Headlamp switch faulty |1.2.4| | 1 |
Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Nearside Chain guard fouling another component |6.2.1c| | 1 |
Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Front Front mudguard can easily contact any fixed point of the motor bicycle. |2.3.7| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Horn not working Fixed by Lord Goldfish. |1.7.3a| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Front Brake cable badly frayed |3.2.A1b| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Rear Rear wheel insecure |4.2.3b| | 1 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride Chain link. |6.2.1h| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Rear Brake locking device insecure |3.2.A1e| | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Front suspension fouling which affects the movement of the front suspension. |2.3.6a| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front suspension assembly component loose top yoke bolts |2.3.1| | 1 |
Rear Rear suspension component loose |2.4.A.1a| | 1 |
Rear Brake back plate|s| securing bolt|s| loose |3.2.A1j| | 1 |
Front Brake back plate|s| securing bolt|s| loose |3.2.A1j| | 1 |