Most common failures | No# failures |
---|
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Headlamp aim out of alignment | 4 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Fuel cap sealing washer deteriorated |7.2.2c| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Offside Front wheel has a missing wheel bolt|s| |4.2.3a| | 1 |
Offside Front Lower Brake pipe union leaking fluid |3.2.B4| | 1 |
Nearside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Offside Front Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Sidecar attachment insecure |5.1.1b| | 1 |
Rear Brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Nearside Front wheel has a missing wheel bolt|s| |4.2.3a| | 1 |
Front Brake master cylinder leaking |1.1.10 |b| |ii|| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Fuel pipe leaking |7.2.1a| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Front Fuel pipe leaking |7.2.1a| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Brake locking device insecure |3.2.A1e| | 1 |
Front wheel spindle loose pinch bolts |2.3.3a| | 1 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Fuel pipe leaking (6.1.3 (b) (i)) | 1 |
Rear Stop lamp not working switch fault (4.3.1 (a) (ii)) | 1 |