Most common failures | No# failures |
---|
Headlamp aim out of alignment | 39 |
Registration plate issues | 11 |
Horn not working |1.7.3a| | 7 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 6 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 6 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 3 |
Rear Position lamp not working |4.2.1 |a|| | 2 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Front Brake component worn and seriously reduced in strength |3.2.A1| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 2 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected |6.2.7 |a| |ii|| | 1 |
Fuel cap does not fasten securely by a positive means |7.2.2b| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Fuel system component leaking From under tank. |6.1.3 |b| |i|| | 1 |
Headlamp light source and lamp not compatible HID bulb fitted |4.1.4 |c|| | 1 |
Rear brake disc in such a condition that it is seriously weakened | 1 |
Brake performance not tested |1.2.1 |g|| | 1 |
Rear Plate brake test indicates a sticking brake |3.3.B1a| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Front Brake hose which buldges |3.2.B4| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Central Front Position lamp not working |4.2.1 |a|| | 1 |
Central Rear Position lamp missing |4.2.1 |a|| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Throttle operating incorrectly does not return to idle |6.2.7 |a| |i|| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Stop lamp does not illuminate immediately a brake applies front brake |1.3.1a| | 1 |
Offside Front Brake disc|s| insecure |3.2.A1g| | 1 |
Rear Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Nearside Indicator switch insecure |1.5.4| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Registration plate lamp issues | 1 |
Rear Seat insecure |6.2.1a| | 1 |
Offside Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Offside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Nearside Front Brake disc|s| insecure |3.2.A1g| | 1 |
Offside Rear Brake disc|s| insecure |3.2.A1g| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Nearside Front Brake pipe union leaking fluid |3.2.B4| | 1 |
Offside Front Brake pipe union leaking fluid |3.2.B4| | 1 |
Front Brake hose leaking fluid |3.2.B4| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Valve stem seriously damaged |5.2.3 |j|| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Front Brake disc|s| insecure |3.2.A1g| | 1 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Brake disc significantly and obviously worn both |1.1.14 |a| |i|| | 1 |
Nearside Front Brake hose leaking fluid |3.2.B4| | 1 |
Front Brake lever cannot be released smoothly |3.1.3d| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Rear suspension bearing has excessive free play swinging arm bevel box |2.4.A2a|i|| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Rear Suspension arm pin or bush excessively worn rear swing arm has excessive movement |5.3.4 |a| |i|| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |