Most common failures | No# failures |
---|
Headlamp aim out of alignment | 14 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 11 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 6 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Registration plate issues | 4 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Rear Wheel spoke excessively loose |4.2.1b| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Brake excessively binding |1.2.1 |f|| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Brake hose leaking fluid |3.2.B4| | 2 |
Rear Position lamp not working |4.2.1 |a|| | 2 |
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 2 |
Nearside Steering lock stop missing |2.1.3| | 2 |
Front mudguard insecure |2.3.7| | 2 |
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Brake hose excessively deteriorated | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Horn not working |1.7.3a| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii|| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Seat insecure |6.2.1a| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Nearside Lower Exhaust mounting missing |7.1.1c| | 1 |
Offside Brake pipe inadequately supported |3.2.B2b| | 1 |
Offside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Nearside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front Brake hose damaged and likely to fail Corrosion on ferrule damaging rubber hose. |1.1.12 |a|| | 1 |
Rear Brake hose damaged and likely to fail Corrosion on ferrule causing damage to rubber hose. |1.1.12 |a|| | 1 |
Rear All direction indicators obviously incorrectly positioned Indicators below minimum distance apart. |4.4.3 |a|| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Rear position lamp missing |1.1.1a| | 1 |
Rear Brake hose which buldges |3.2.B4| | 1 |
Offside Front Brake hose excessively twisted |3.2.B3a| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear suspension bearing has excessive free play SHAFT/HUB |2.4.A2a|i|| | 1 |
Rear Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Horn sounds harsh or grating |1.7.3c| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front suspension assembly component loose wishbone ball joint loose or play |2.3.1| | 1 |
Rear Brake disc|s| cracked |3.2.A1g| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Exhaust has part of the system missing |7.1.1a| | 1 |
Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Offside Front Brake hose leaking |1.1.12 |c|| | 1 |
Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
Offside Front Steering lock stop missing |2.1.3| | 1 |
Front Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Brake performance not tested |3.3| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Centre Lower Front suspension assembly component loose |2.3.1| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
Nearside Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear Exhaust system insecure (6.1.2 (a)) | 1 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |