Most common failures | No# failures |
---|
Headlamp aim out of alignment | 41 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 17 |
Registration plate issues | 14 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 9 |
Registration plate lamp issues | 9 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Horn not working |1.7.3a| | 6 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 5 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Headlamp aim beam image kick up to the offside |1.6| | 5 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Rear reflector on motorcycle missing |1.4.1| | 4 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 4 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 3 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Offside Rear Direction indicator not working |1.5.1c| | 3 |
Nearside Rear Direction indicator not working |1.5.1c| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Nearside Rear Direction indicator insecure |1.5.3b| | 3 |
Offside Rear Direction indicators not working |1.5.1c| | 3 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Fuel cap sealing washer deteriorated |7.2.2c| | 2 |
Front suspension has inadequate damping effect. |2.3.6c| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Nearside Rear Footrest missing |6.2.1a| | 2 |
Rear Brake locking device missing |3.2.A1e| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Stop lamp remains on when the brakes are released | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 2 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Steering operation restricted in free movement from lock to lock |2.1.4 |c|| | 1 |
Front Wheel spindle loose |5.2.1 |c| |i|| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Offside Front Brake disc|s| insecure |3.2.A1g| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
Rear Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Offside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Rear Brake performance not tested |3.3| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen beam kick to right on dip |4.1.2 |a|| | 1 |
Rear Direction indicator insecure |1.5.3b| | 1 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
An item not tested |Manual| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front Indicator tell tale not functioning |1.5.2| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Stop lamp does not illuminate immediately a brake applies via rear brake |1.3.1a| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Brake disc|s| securing bolt|s| loose |3.2.A1g| | 1 |
Plate brake test No brake control achieves an efficiency of 30%. |3.3.B2a| | 1 |
Plate brake test Neither brake control achieves an efficiency of 25% |3.3.B2b| | 1 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Nearside Rear Direction indicator incorrect colour |4.4.3 |a|| | 1 |
Direction indicator insecure |1.5.3b| | 1 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Nearside Front Brake disc|s| insecure |3.2.A1g| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Rear Brake disc significantly and obviously worn Pitted and scored. |1.1.14 |a| |i|| | 1 |
Rear Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Rear Rear position lamp incorrect colour |1.1.2b| | 1 |
Centre Rear Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Brake disc|s| cracked |3.2.A1g| | 1 |
Front Front suspension assembly excessive wear or free play in a front suspension component front ball joint gaiter spilt |2.3.4| | 1 |
Offside Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Front Shock absorber has a serious fluid leak LH front fork seal leaking, and fluid is running down the leg. |possible brake contamination|. |5.3.2 |b|| | 1 |
Front Brake pipe excessively chafed |3.2.B2a| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Nearside Locking devices not correctly fitted which may make the motor bicycle dangerous to ride no locking device on l/h riders footpeg pivot |6.2.1h| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Throttle operating incorrectly |6.2.1f| | 1 |
Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Rear Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
Front Brake hose stretched by suspension movement |3.2.B3b| | 1 |
Rear Brake hose stretched by suspension movement |3.2.B3b| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Front Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Rear Brake disc fractured |1.1.14 |a| |ii|| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Riders seat missing |6.2.1a| | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Shock absorber has a serious fluid leak both forks (5.3.2 (b)) | 1 |
Offside Front Brake caliper leaking and braking performance affected (1.1.16 (b) (ii)) | 1 |
Rear position lamp does not illuminate immediately when it is switched on (1.1.3a) | 1 |
Rear suspension component loose swingarm/drive pivot/joint loose (2.4.A.1a) | 1 |
Offside Front shock absorber seal failed and leaking oil (2.3.3) | 1 |
Rear Roller brake test indicates a binding brake (3.3.A1a) | 1 |
Steering damper in such a condition that the steering action is impaired. (2.1.2d) | 1 |
Nearside Front Direction indicators flashing less than 60 times a minute (1.5.1c) | 1 |
Offside Rear Direction indicators flashing less than 60 times a minute (1.5.1c) | 1 |
Offside Front Direction indicators not working (1.5.1c) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Wheel spindle loose (5.2.1 (c) (i)) | 1 |
Nearside Front Brake disc(s) insecure (3.2.A1g) | 1 |
Front Roller brake test indicates a binding brake (3.3.A1a) | 1 |
Rear Stop lamp light intensity significantly reduced (4.3.3 (a) (ii)) | 1 |
Offside Front Brake disc contaminated (1.1.14 (b)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Offside Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear Brake cylinder leaking (1.1.16 (b) (i)) | 1 |
Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Rear Stop lamp not working when rear brake is applied (4.3.1 (a) (ii)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
All position lamps not working (4.2.1 (a)) | 1 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Steering operation restricted in free movement from lock to lock (2.1.4 (c)) | 1 |
Horn not working (7.7 (a)) | 1 |