>

MOT History from tests of petrol BENELLI BNs year 2021

Review the list of common BENELLI BN failures below or to perform a specific mot history check on your BENELLI then use our popular KnowYourCar service

mot history
Pass percent:68.36%
(The average a petrol BENELLI BN year 2021 passes without issue)
Based on:373 MOT Tests
Most common failuresNo# failures
Registration plate lamp issues29
Drive chain excessively loose (6.1.7 (c) (i))13
Front Stop lamp not working (4.3.1 (a) (ii))8
Headlamp aim out of alignment8
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))6
Drive chain excessively tight (6.1.7 (k) (i))5
Headlamp not working on dipped beam (4.1.1 (a) (ii))5
Rear Drive chain sprocket worn to excess (6.1.7 (c) (i))5
Drive chain so worn it is likely to fail (6.1.7 (c) (ii))4
Steering headbearing has excessive wear or free play (2.2.2 (f) (i))4
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii))4
Rear Shock absorber has negligible damping effect (5.3.2 (b))3
Drive chain worn to excess (6.1.7 (c) (i))3
Wheel alignment incorrect which adversely affects the handling (2.4 (a))3
Rear Drive chain sprocket so worn it is likely to fail (6.1.7 (c) (ii))2
Drive chain so loose it is likely to fail (6.1.7 (c) (ii))2
Front Brake excessively binding (1.2.1 (f))2
Nearside Rear Direction indicator not working (4.4.1 (a) (ii))2
Rear Suspension attachment bracket/mounting insecure (5.3.3 (a) (i))2
Horn not working (7.7 (a))2
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))2
Rear Footrest missing (6.2.12 (a))2
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))2
Front Headlamp not working on dipped beam (4.1.1 (a) (ii))2
Rear Drive chain excessively loose (6.1.7 (c) (i))2
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))2
Stop lamp remains on when the brakes are released2
Rear reflector missing (4.8.2 (a) (ii))2
Rear Wheel bearing has excessive play (5.1.3 (a) (i))2
Nearside Rear Footrest missing (6.2.12 (a))2
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))2
Offside Rear Direction indicator not working (4.4.1 (a) (ii))1
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))1
Front All direction indicators not working (4.4.1 (a) (ii))1
Rear All direction indicators not working (4.4.1 (a) (ii))1
Stop lamp does not illuminate by the operation of both brake controls front brake (4.3.2 (a) (iii))1
Throttle operating incorrectly (6.2.7 (a) (i))1
Offside Front Footrest insecure pin and bracket bent facing downwards (6.2.12 (a))1
Rear Brake pedal has insufficient reserve travel (1.1.2 (a))1
Front Brake lever has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f))1
Front Brake lever excessively worn (1.1.15 (b))1
Stop lamp not working from front brake (4.3.1 (a) (ii))1
Pillion seat insecure (6.2.6 (a) (ii))1
Wheel alignment incorrect which adversely affects the steering (2.4 (a))1
Central Rear Suspension component pin or bush excessively worn Main swingarm pivot (5.3.4 (a) (i))1
Rear Wheel excessively damaged (5.2.2 (c) (i))1
Front Brake fluid significantly below minimum mark (1.1.10 (d) (ii))1
Stop lamp not working brake light not working from front brake lever (4.3.1 (a) (ii))1
Rear Suspension arm pin or bush excessively worn Swinging arm bush (5.3.4 (a) (i))1
Horn sound not in accordance with requirements (7.7 (c))1
Rear Stop lamp emits other than a steady red light front brake lever. (4.3.3 (a) (ii))1
Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i))1
Front Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b))1
Nearside Rear Suspension arm ball joint excessively worn swing arm (5.3.4 (a) (i))1
Offside Front Footrest insecure Footpeg broken (6.2.12 (a))1
Front Drive chain sprocket worn to excess (6.1.7 (c) (i))1
Offside Front Brake lever is so short that the brake cannot be readily applied (1.1.2 (d))1
Offside Rear Footrest missing (6.2.12 (a))1
Nearside Rear Drive chain excessively tight, so that it is likely to fail (6.1.7 (k) (ii))1
Offside Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))1
Nearside Front Drive chain sprocket worn to excess (6.1.7 (c) (i))1
Drive chain sprocket worn to excess (6.1.7 (c) (i))1
Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i))1
Front Horn not working (7.7 (a))1
Offside Front Footrest insecure Broken (6.2.12 (a))1
Rear Upper Shock absorber has an excessively worn bush (5.3.2 (c))1
Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))1
Rear Suspension arm ball joint excessively worn Swing arm (5.3.4 (a) (i))1
Front Brake master cylinder insecure (1.1.10 (c))1
Offside Front Steering operation restricted in free movement from lock to lock ignition switch catching steering lock as bent restricting right hand lock (2.1.4 (c))1
Rear Suspension arm ball joint excessively worn swinging arm bushes worn (5.3.4 (a) (i))1
Offside Front Upper Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))1
Offside Rear Direction indicator missing O/S rear indicator missing (4.4.1 (a) (ii))1
Nearside Rear Drive chain excessively loose (6.1.7 (c) (i))1
Rear Rear reflector missing Fitted new reflector (4.8.2 (a) (ii))1
Rear Shock absorber has an excessively worn bush shocker top bush (5.3.2 (c))1
Rear Suspension arm pin or bush excessively worn swing arm bushes (5.3.4 (a) (i))1
Nearside Rear Direction indicator with a multiple light source more than 1/2 not functioning (4.4.1 (a) (ii))1
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))1
Headlamp aim projected beam image obviously incorrect (4.1.2 (c))1
Exhaust system insecure (6.1.2 (a))1
Rear Drive chain worn to excess (6.1.7 (c) (i))1
Rear Rear reflector missing (4.8.2 (a) (ii))1
Front Stop lamp emits other than a steady red light Switch not working correctly (4.3.3 (a) (ii))1
Drive chain excessively tight, so that it is likely to fail (6.1.7 (k) (ii))1
Upper Steering headbearing has excessive wear or free play (2.2.2 (f) (i))1
Lower Steering headbearing has excessive wear or free play (2.2.2 (f) (i))1
Stop lamp does not illuminate by the operation of both brake controls Front switch fault (4.3.2 (a) (iii))1
Headlamp not working on main beam (4.1.1 (a) (ii))1
Brake pedal insecure (1.1.2 (e) (i))1
Rear Suspension arm missing (5.3.3 (a) (ii))1
Stop lamp not working (4.3.1 (a) (ii))1
Stop lamp not working Front brake control (4.3.1 (a) (ii))1
Rear Stop lamp not working (4.3.1 (a) (ii))1
Offside Front Footrest insecure (6.2.12 (a))1
Brake performance unable to be tested (1.2.1 (g))1
Nearside Front Footrest missing (6.2.12 (a))1
Front Handlebar deformed to the extent that steering is affected (2.2.1 (c) (ii))1
Steering headbearing has excessive wear or free play Play (2.2.2 (f) (i))1
Rear Shock absorber has an excessively worn bush top bush (5.3.2 (c))1
Forks excessively deformed (2.2.2 (d) (i))1
Front Footrest insecure (6.2.12 (a))1
Brake pedal anti-slip provision loose (1.1.2 (c))1
Drive chain sprocket so worn it is likely to fail (6.1.7 (c) (ii))1
Nearside Front Clutch lever shortened so it cannot be readily operated (6.2.7 (b))1
Steering linkage component fractured (2.1.3 (c) (i))1
Front Headlamp not working on main beam (4.1.1 (a) (ii))1
Registration plate issues1
Offside Front Stop lamp not working (4.3.1 (a) (ii))1
Offside Front Throttle operating incorrectly NOT RETURNING WHEN RELEASE THE GRIP STUCK (6.2.7 (a) (i))1
Front Shock absorber has negligible damping effect (5.3.2 (b))1
Nearside Rear Drive chain so loose it is likely to fail (6.1.7 (c) (ii))1
Rear Suspension arm ball joint excessively worn Excessive play in rear swingarm pivot bushes (5.3.4 (a) (i))1
Stop lamp not working when brake lever (handlebar) is applied (4.3.1 (a) (ii))1
Offside Front Footrest missing (6.2.12 (a))1
Front Drive chain sprocket so worn it is likely to fail (6.1.7 (c) (ii))1
Stop lamp does not illuminate by the operation of both brake controls not working when applying brake lever (4.3.2 (a) (iii))1
Nearside Front Direction indicator not working Unreliable operation. (4.4.1 (a) (ii))1
Handlebar deformed to the extent that steering is affected handlebars bent (2.2.1 (c) (ii))1
Suspension arm ball joint excessively worn (5.3.4 (a) (i))1
Drive chain worn to excess seized links etc (6.1.7 (c) (i))1
Stop lamp not working front brake (4.3.1 (a) (ii))1
Rear brake disc in such a condition that it is seriously weakened1
Front Brake disc significantly and obviously worn (1.1.14 (a) (i))1
Rear Shock absorber has an excessively worn bush (5.3.2 (c))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy