| Most common failures | No# failures |
|---|
| Windscreen wiper does not clear the windscreen effectively | 6 |
| Registration plate lamp issues | 5 |
| Headlamp aim out of alignment | 5 |
| Offside Rear fog lamp not working |1.3.2b| | 5 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
| Registration plate issues | 4 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
| Offside Front Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 3 |
| Horn not working |7.7 |a| |ii|| | 3 |
| Rear brake application uneven | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Front brake disc in such a condition that it is seriously weakened | 2 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
| Offside Front suspension locking device missing |2.5.A.4| | 2 |
| Brake pipe excessively corroded | 2 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 2 |
| Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 2 |
| Emissions not tested |7.0| | 2 |
| Rear brake binding | 2 |
| Nearside Rear Suspension component mounting prescribed area is fractured |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is fractured |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Nearside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
| Offside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
| Offside Obligatory mirror insecure |8.1.1| | 1 |
| Offside Rear fog lamp emits a light other than red |1.3.2e| | 1 |
| Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Offside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Stop lamp(s) all not working (4.3.1 (a) (iii)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Offside Front Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9| | 1 |
| Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
| Nearside Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
| Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
| Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
| Brakes imbalanced across an axle | 1 |
| Nearside Track rod end ball joint has excessive play |2.1.3 |b| |i|| | 1 |
| Offside Rear coil spring broken |2.4.C.1a| | 1 |
| Offside Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
| Nearside Stop lamp|s| not working |4.3.1 |a| |ii|| | 1 |
| Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Front Upper Bonded suspension unit bonding failed and part of unit is likely to become displaced |2.4.F.2| | 1 |
| Offside Front Upper Bonded suspension unit bonding failed and part of unit is likely to become displaced |2.4.F.2| | 1 |
| Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
| Nearside Rear Coil spring not correctly located |2.4.C.2| | 1 |
| Nearside Rear wheel bearing rough when rotated |2.6.1| | 1 |
| Offside Rear Service brake application uneven across the axle |3.7.D.2b| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Rear Exhaust system not adequately supported |7.1.1| | 1 |
| Offside Rear Service brake indicates brake bind |3.7.D.2a| | 1 |
| Offside Front coil spring incomplete |2.4.C.1a| | 1 |
| Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Side repeater not working |1.4.A.2c| | 1 |
| Nearside Headlamp insecure |1.7.3| | 1 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Rear Body has a sharp edge caused by damage indicator lens |6.1.C.1| | 1 |
| Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases manifold gasket - nuts missing |7.1.2| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Offside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Parking brake lever has no reserve travel |3.1.6b| | 1 |
| Brake pedal has insufficient reserve movement |3.3.A.5| | 1 |
| Nearside Rear Leaf spring splayed and action impaired |2.4.B.1c| | 1 |
| Offside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Offside Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Exhaust mounting missing |7.1.1b| | 1 |
| Nearside Rear Body component corroded and likely to cause injury panel in front of rear bumper |6.2.1 |a| |i|| | 1 |
| Offside Front Body component damaged and likely to cause injury bumper end |6.2.1 |a| |i|| | 1 |
| Offside Rear Body component damaged and likely to cause injury bumper end |6.2.1 |a| |i|| | 1 |
| Headlamp not working on main beam BOTH |4.1.1 |a| |ii|| | 1 |
| Headlamp not working on dipped beam BOTH |4.1.1 |a| |ii|| | 1 |
| Headlamp aim not tested BOTH |4.1.2 |b|| | 1 |
| All position lamps not working |4.2.1 |a|| | 1 |
| Offside Rear Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
| All direction indicators not working |4.4.1 |a| |ii|| | 1 |
| Offside Body component corroded and likely to cause injury SLIDING DOOR AT REAR BOTTOM CORNER |6.2.1 |a| |i|| | 1 |
| Nearside Rear Service brake effort inadequate at a wheel |1.2.1 |a| |i|| | 1 |
| Offside Rear Service brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 1 |
| Brake pipe leaking on a hydraulic braking system IN CETRE OF FOOTWELL |1.1.11 |b| |ii|| | 1 |
| Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
| Main beam tell-tale not working |4.9.1 |a| |ii|| | 1 |
| Indicator switch inoperative MISSING |4.4.2 |a| |ii|| | 1 |
| Service brake efficiency below requirements |1.2.2 |a| |i|| | 1 |
| Tailgate cannot be secured in the closed position |6.4.1| | 1 |
| Nearside Headlamp aim not tested |1.8.A.1c| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Brake servo vacuum pipe deteriorated |3.6.C.1b| | 1 |
| Exhaust emissions - engine idle speed too high (8.2.1.2 (e)) | 1 |
| Rear fog lamp not working |1.3.2b| | 1 |
| Centre Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
| Centre Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Nearside Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Front Direction indicator excessively damaged so that it is not visible from a reasonable distance |1.4.A.2e| | 1 |
| Nearside Rear Leaf spring has a deteriorated anchor pin rubber bush resulting in excessive movement |2.4.B.2| | 1 |
| Offside Lower Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Brake actuating linkage mounting prescribed area is excessively corroded |3.3.A.2| | 1 |
| Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Front Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
| Offside Rear Rear fog lamp not working |1.3.2b| | 1 |
| Offside Front Vehicle structure has a fracture which adversely affects braking or steering |6.1.A.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |