MOT History from tests of diesel BEDFORD ICECREAMs year 1984

Review the list of common BEDFORD ICECREAM failures below or to perform a specific mot history check on your BEDFORD then use our popular KnowYourCar service

mot history

Pass percent:40.00%

(The average a diesel BEDFORD ICECREAM year 1984 passes without issue)

Based on:10 MOT Tests

Most common failures	No# failures
Service brake: efficiency below requirements \|3.7.B.7\|	2
Nearside Front wheel bearing rough when rotated \|2.5.A.2\|	2
Horn not working \|1.6.2a\|	1
Rear fog lamp excessively damaged so that it is not visible from a reasonable distance \|1.3.2d\|	1
Offside Front Suspension component mounting prescribed area is excessively corroded inner sill \|2.4.A.3\|	1
Offside Rear Leaf spring to axle securing nut insecure \|2.4.B.7b\|	1
Nearside Front Front position lamp\|s\| not working \|1.1.A.3b\|	1
Rear Rear fog lamp not working \|1.3.2b\|	1
Offside Front front brake recording little or no effort \|3.7.B.5a\|	1
Exhaust emits an excessive level of metered smoke for a non-turbo charged engine \|7.4.B.3b\|	1
Brakes imbalanced across an axle	1
Nearside Rear Leaf spring to axle securing nut insecure \|2.4.B.7b\|	1
Offside Rear Leaf spring to axle securing nut missing \|2.4.B.7b\|	1
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Exhaust has part of the system excessively deteriorated \|7.1.1a\|	1
Offside Rear Rear fog lamp not working \|1.3.2b\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Service brake: efficiency below requirements \|3.7.B.7\|	2
Nearside Front wheel bearing rough when rotated \|2.5.A.2\|	2
Horn not working \|1.6.2a\|	1
Rear fog lamp excessively damaged so that it is not visible from a reasonable distance \|1.3.2d\|	1
Offside Front Suspension component mounting prescribed area is excessively corroded inner sill \|2.4.A.3\|	1
Offside Rear Leaf spring to axle securing nut insecure \|2.4.B.7b\|	1
Nearside Front Front position lamp\|s\| not working \|1.1.A.3b\|	1
Rear Rear fog lamp not working \|1.3.2b\|	1
Offside Front front brake recording little or no effort \|3.7.B.5a\|	1
Exhaust emits an excessive level of metered smoke for a non-turbo charged engine \|7.4.B.3b\|	1
Brakes imbalanced across an axle	1
Nearside Rear Leaf spring to axle securing nut insecure \|2.4.B.7b\|	1
Offside Rear Leaf spring to axle securing nut missing \|2.4.B.7b\|	1
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Exhaust has part of the system excessively deteriorated \|7.1.1a\|	1
Offside Rear Rear fog lamp not working \|1.3.2b\|	1

MOT History from tests of diesel BEDFORD ICECREAMs year 1984

Find us on Facebook