| Most common failures | No# failures |
|---|
| Brakes imbalanced across an axle | 6 |
| Headlamp aim out of alignment | 2 |
| Rear fog lamp tell tale not working |1.3.1b| | 2 |
| Service brake: efficiency below requirements |3.7.B.7| | 2 |
| Windscreen wiper does not clear the windscreen effectively | 2 |
| Nearside Headlamp not working on main beam |1.7.5a| | 1 |
| Rear fog lamp not working |1.3.2b| | 1 |
| Hazard warning lamps inoperative |1.4.B.1b| | 1 |
| Offside rear parking |secondary| brake grabbing severely |3.7.B.6b| | 1 |
| Rear brake application uneven | 1 |
| Nearside Rear Brake pipe inadequately supported |3.6.B.1| | 1 |
| Nearside Steering rack gaiter split |2.2.D.2d| | 1 |
| Offside Front Shock absorber detached |2.7.2b| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded seat mounting area |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded seat mounting area |5.2.6| | 1 |
| Front Service brake application uneven across the axle x 2 |3.7.D.2b| | 1 |
| Rear Service brake application uneven across the axle x 2 |3.7.D.2b| | 1 |
| Front Front wheel bearing rough when rotated x 2 also has slight play |2.5.A.2| | 1 |
| Offside Front Outer Steering rack gaiter insecure |2.2.D.2d| | 1 |
| Position lamp switch does not illuminate the front and rear position lamps with a single operation |1.1.A.2| | 1 |
| Registration plate issues | 1 |
| Parking brake: efficiency below requirements |3.7.B.7| | 1 |
| Service brake has no recorded effort at a wheel service brake appears to work intermittently (1.2.1 (a) (ii)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Exhaust has a major leak of exhaust gases Tail pipe broken off below vehicle (6.1.2 (a)) | 1 |
| Nearside Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Parking brake lever defective so that it cannot be satisfactorily operated very stiff to release (1.1.6 (d)) | 1 |
| Front Headlamp not working on dipped beam both |4.1.1 |a| |ii|| | 1 |
| Oil leaking excessively from engine |8.4.1 |a| |i|| | 1 |
| Offside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| All position lamps adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Offside Front Bumper damaged and likely to cause injury when grazed or contacted (6.1.4 (a) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill/step (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill/step (6.1.1 (c) (i)) | 1 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
| Brake operation has insufficient reserve pressure/vacuum to provide assistance for at least two more brake applications after the warning lamp or other device has operated |3.3.E.5b| | 1 |
| All position lamps not working |1.1.A.3b| | 1 |
| Registration plate lamp issues | 1 |
| Nearside rear brake recording little or no effort |3.7.B.5a| | 1 |
| Offside rear brake recording little or no effort |3.7.B.5a| | 1 |