MOT History from tests of petrol BEDFORD CF350s year 1980

Review the list of common BEDFORD CF350 failures below or to perform a specific mot history check on your BEDFORD then use our popular KnowYourCar service

mot history

Pass percent:66.67%

(The average a petrol BEDFORD CF350 year 1980 passes without issue)

Based on:24 MOT Tests

Most common failures	No# failures
Brakes imbalanced across an axle	3
Registration plate lamp issues	2
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	2
Offside Front Body has a sharp edge caused by corrosion \|6.1.C.1\|	2
Nearside rear brake grabbing severely \|3.7.A.5b\|	2
Hazard warning switch faulty \|1.4.B.1d\|	1
Emissions not tested \|7.0\|	1
Offside front brake grabbing severely \|3.7.A.2b\|	1
Rear brake binding	1
Offside Front Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Nearside Headlamp aim beam image kick up to the offside \|1.8\|	1
Nearside Rear position lamp\|s\| adversely affected by the operation of another lamp \|1.1.A.3f\|	1
Offside Rear position lamp\|s\| adversely affected by the operation of another lamp \|1.1.A.3f\|	1
Nearside Rear brake drum in such a condition that it is seriously weakened \|3.5.1i\|	1
Offside Rear brake drum in such a condition that it is seriously weakened \|3.5.1i\|	1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Centre Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Front Windscreen wiper blade missing \|8.2.2\|	1
Nearside Front Lower Coil spring mounting damaged and seriously weakened \|2.4.C.3c\|	1
Offside Front Lower Coil spring mounting damaged and seriously weakened \|2.4.C.3c\|	1
Spare wheel carrier insecure \|6.4.2\|	1
Windscreen wiper does not clear the windscreen effectively	1
Driver`s seat insecure \|6.2.A.1\|	1
Front passenger seat insecure \|6.2.3\|	1
Brake pipe excessively corroded	1
Nearside front brake juddering severely \|3.7.A.2b\|	1
Offside front brake juddering severely \|3.7.A.2b\|	1
Nearside Headlamp not working on dipped beam \|1.7.5a\|	1
Nearside Headlamp not working on main beam \|1.7.5a\|	1
Brake master cylinder/servo mounting prescribed area is excessively corroded \|3.6.C.3\|	1
Brake servo leaking \|3.6.C.1c\|	1
Nearside Front Shock absorber has negligible damping effect \|2.7.5\|	1
Offside Front Shock absorber has negligible damping effect \|2.7.5\|	1
Offside Front suspension has excessive play in a upper suspension ball joint \|2.5.B.1a\|	1
Nearside Front position lamp\|s\| not working \|1.1.A.3b\|	1
Nearside Front Body has a sharp edge caused by corrosion \|6.1.C.1\|	1
Offside Front Subframe mounting prescribed area is deliberately modified which significantly reduces the original strength \|2.4.A.3\|	1
Headlamp aim out of alignment	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Brakes imbalanced across an axle	3
Registration plate lamp issues	2
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	2
Offside Front Body has a sharp edge caused by corrosion \|6.1.C.1\|	2
Nearside rear brake grabbing severely \|3.7.A.5b\|	2
Hazard warning switch faulty \|1.4.B.1d\|	1
Emissions not tested \|7.0\|	1
Offside front brake grabbing severely \|3.7.A.2b\|	1
Rear brake binding	1
Offside Front Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Nearside Headlamp aim beam image kick up to the offside \|1.8\|	1
Nearside Rear position lamp\|s\| adversely affected by the operation of another lamp \|1.1.A.3f\|	1
Offside Rear position lamp\|s\| adversely affected by the operation of another lamp \|1.1.A.3f\|	1
Nearside Rear brake drum in such a condition that it is seriously weakened \|3.5.1i\|	1
Offside Rear brake drum in such a condition that it is seriously weakened \|3.5.1i\|	1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Centre Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Front Windscreen wiper blade missing \|8.2.2\|	1
Nearside Front Lower Coil spring mounting damaged and seriously weakened \|2.4.C.3c\|	1
Offside Front Lower Coil spring mounting damaged and seriously weakened \|2.4.C.3c\|	1
Spare wheel carrier insecure \|6.4.2\|	1
Windscreen wiper does not clear the windscreen effectively	1
Driver`s seat insecure \|6.2.A.1\|	1
Front passenger seat insecure \|6.2.3\|	1
Brake pipe excessively corroded	1
Nearside front brake juddering severely \|3.7.A.2b\|	1
Offside front brake juddering severely \|3.7.A.2b\|	1
Nearside Headlamp not working on dipped beam \|1.7.5a\|	1
Nearside Headlamp not working on main beam \|1.7.5a\|	1
Brake master cylinder/servo mounting prescribed area is excessively corroded \|3.6.C.3\|	1
Brake servo leaking \|3.6.C.1c\|	1
Nearside Front Shock absorber has negligible damping effect \|2.7.5\|	1
Offside Front Shock absorber has negligible damping effect \|2.7.5\|	1
Offside Front suspension has excessive play in a upper suspension ball joint \|2.5.B.1a\|	1
Nearside Front position lamp\|s\| not working \|1.1.A.3b\|	1
Nearside Front Body has a sharp edge caused by corrosion \|6.1.C.1\|	1
Offside Front Subframe mounting prescribed area is deliberately modified which significantly reduces the original strength \|2.4.A.3\|	1
Headlamp aim out of alignment	1

MOT History from tests of petrol BEDFORD CF350s year 1980

Find us on Facebook