MOT History from tests of petrol BEDFORD CF350s year 1979

Review the list of common BEDFORD CF350 failures below or to perform a specific mot history check on your BEDFORD then use our popular KnowYourCar service

mot history

Pass percent:12.50%

(The average a petrol BEDFORD CF350 year 1979 passes without issue)

Based on:8 MOT Tests

Most common failures	No# failures
Brakes imbalanced across an axle	3
Offside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	2
Brake pipe excessively corroded	2
Nearside Steering rack gaiter split \|2.2.D.2d\|	1
Offside Steering rack gaiter split \|2.2.D.2d\|	1
Nearside Front wheel bearing has excessive play \|2.5.A.3c\|	1
Brake hose excessively deteriorated	1
Rear Brake hose leaking \|3.6.A.1\|	1
Nearside Obligatory mirror insecure \|8.1.1\|	1
Offside Obligatory mirror insecure \|8.1.1\|	1
Hazard warning tell tale not working correctly \|1.4.B.1e\|	1
Nearside Front Lower Shock absorber has an excessively worn bush \|2.7.4\|	1
Rear brake application uneven	1
Front brake application uneven	1
Nearside Front Lower Suspension arm has excessive play in a ball joint \|2.4.G.2\|	1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Registration plate lamp issues	1
Nearside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Front Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Nearside front brake binding \|3.7.B.1\|	1
Offside Front Upper Suspension arm has excessive play in a ball joint \|2.4.G.2\|	1
Registration plate issues	1
Nearside Rear position lamp\|s\| adversely affected by the operation of another lamp \|1.1.A.3f\|	1
Rear position lamp\|s\| excessively deteriorated so that it is not visible from a reasonable distance \|1.1.A.3d\|	1
Nearside Front Service brake indicates brake bind \|3.7.D.2a\|	1
Headlamp aim out of alignment	1
Nearside Front Direction indicator not working \|1.4.A.2c\|	1
Nearside Rear Direction indicator not working \|1.4.A.2c\|	1
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement \|7.2.4b\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Brakes imbalanced across an axle	3
Offside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	2
Brake pipe excessively corroded	2
Nearside Steering rack gaiter split \|2.2.D.2d\|	1
Offside Steering rack gaiter split \|2.2.D.2d\|	1
Nearside Front wheel bearing has excessive play \|2.5.A.3c\|	1
Brake hose excessively deteriorated	1
Rear Brake hose leaking \|3.6.A.1\|	1
Nearside Obligatory mirror insecure \|8.1.1\|	1
Offside Obligatory mirror insecure \|8.1.1\|	1
Hazard warning tell tale not working correctly \|1.4.B.1e\|	1
Nearside Front Lower Shock absorber has an excessively worn bush \|2.7.4\|	1
Rear brake application uneven	1
Front brake application uneven	1
Nearside Front Lower Suspension arm has excessive play in a ball joint \|2.4.G.2\|	1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Registration plate lamp issues	1
Nearside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Front Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Nearside front brake binding \|3.7.B.1\|	1
Offside Front Upper Suspension arm has excessive play in a ball joint \|2.4.G.2\|	1
Registration plate issues	1
Nearside Rear position lamp\|s\| adversely affected by the operation of another lamp \|1.1.A.3f\|	1
Rear position lamp\|s\| excessively deteriorated so that it is not visible from a reasonable distance \|1.1.A.3d\|	1
Nearside Front Service brake indicates brake bind \|3.7.D.2a\|	1
Headlamp aim out of alignment	1
Nearside Front Direction indicator not working \|1.4.A.2c\|	1
Nearside Rear Direction indicator not working \|1.4.A.2c\|	1
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement \|7.2.4b\|	1

MOT History from tests of petrol BEDFORD CF350s year 1979

Find us on Facebook