Most common failures | No# failures |
---|
Windscreen wiper does not clear the windscreen effectively | 6 |
Brakes imbalanced across an axle | 5 |
Parking brake: efficiency below requirements |3.7.B.7| | 4 |
Offside Headlamp not working on main beam |1.7.5a| | 2 |
Registration plate lamp issues | 2 |
Offside Headlamp not working on dipped beam |1.7.5a| | 2 |
Offside front brake binding |3.7.B.1| | 2 |
Offside Front Brake actuating linkage mounting prescribed area is excessively corroded |3.3.A.2| | 2 |
Headlamp aim out of alignment | 2 |
Battery insecure |1.9.1| | 1 |
Lower Driver`s door hinge insecure |6.2.B.2| | 1 |
Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Lower Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
Nearside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Offside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Nearside Rear Leaf spring to axle securing nut insecure |2.4.B.7b| | 1 |
Offside Rear Leaf spring to axle securing nut insecure |2.4.B.7b| | 1 |
Service brake: efficiency below requirements |3.7.B.7| | 1 |
Nearside Rear wheel cylinder leaking |3.6.A.1| | 1 |
Driver`s door cannot be opened from outside the vehicle |6.2.B.1b| | 1 |
Driver`s seat insecure |6.2.A.1| | 1 |
Direction indicators flashing more than 120 times a minute |1.4.A.2g| | 1 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Direction indicators flashing less than 60 times a minute |1.4.A.2g| | 1 |
Direction indicators not in good working order |function impaired| |1.5.A1b| | 1 |
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Fuel hose leaking |7.2.3| | 1 |
Offside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Dipswitch operation does not extinguish all main beam headlamps leaving at least one pair of dipped beam headlamps |1.7.4b| | 1 |
Nearside Front Direction indicator not working |1.4.A.2c| | 1 |
Nearside Rear Direction indicator not working |1.4.A.2c| | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Front Direction indicator insecure |1.4.A.2b| | 1 |
Front brake application uneven | 1 |
Offside front brakes release unevenly |3.7.B.4| | 1 |
Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Front Brake actuating linkage mounting prescribed area is excessively corroded |3.3.A.2| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Offside Indicator tell tale inoperative |1.4.A.2a| | 1 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Headlamp not working on main beam |1.7.5a| | 1 |
Fuel cap/sealing device does not fasten securely by positive means |7.2.4b| | 1 |
Rear Exhaust system not adequately supported |7.1.1| | 1 |