MOT History from tests of petrol BEDFORD CF220s year 1979

Review the list of common BEDFORD CF220 failures below or to perform a specific mot history check on your BEDFORD then use our popular KnowYourCar service

mot history

Pass percent:36.36%

(The average a petrol BEDFORD CF220 year 1979 passes without issue)

Based on:11 MOT Tests

Most common failures	No# failures
Registration plate lamp issues	3
Exhaust emissions carbon monoxide content excessive \|7.3.B.1a\|	3
Exhaust emissions hydrocarbon content excessive \|7.3.B.1b\|	2
Front brake application uneven	2
Horn not working \|1.6.2a\|	2
Nearside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Front Hazard warning lamps not flashing in phase, with ignition on \|1.4.B.1f\|	1
Offside Front Hazard warning lamps not flashing in phase, with ignition on \|1.4.B.1f\|	1
Fuel cap/sealing device sealing washer deteriorated \|7.2.4c\|	1
Offside Front Upper Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Headlamp aim out of alignment	1
Offside Rear Stop lamp adversely affected by the operation of another lamp \|1.2.1f\|	1
Offside Front Shock absorber has an excessively worn shock absorber pivot \|2.7.4\|	1
Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Rear Upper Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Upper Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Parking brake mechanism/associated mounting prescribed area is excessively corroded \|3.1.9\|	1
Exhaust system not adequately supported \|7.1.1\|	1
Offside Front Upper Suspension arm cracked \|2.4.G.1\|	1
Bonnet cannot be secured in the closed position \|8.4.1\|	1
Brakes imbalanced across an axle	1
Offside Front Upper Suspension arm has excessive play in a ball joint \|2.4.G.2\|	1
Windscreen wiper does not clear the windscreen effectively	1
Brake hose damaged	1
Front Vehicle structure has excessive corrosion which adversely affects braking or steering \|6.1.A.1\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Registration plate lamp issues	3
Exhaust emissions carbon monoxide content excessive \|7.3.B.1a\|	3
Exhaust emissions hydrocarbon content excessive \|7.3.B.1b\|	2
Front brake application uneven	2
Horn not working \|1.6.2a\|	2
Nearside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Front Hazard warning lamps not flashing in phase, with ignition on \|1.4.B.1f\|	1
Offside Front Hazard warning lamps not flashing in phase, with ignition on \|1.4.B.1f\|	1
Fuel cap/sealing device sealing washer deteriorated \|7.2.4c\|	1
Offside Front Upper Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Headlamp aim out of alignment	1
Offside Rear Stop lamp adversely affected by the operation of another lamp \|1.2.1f\|	1
Offside Front Shock absorber has an excessively worn shock absorber pivot \|2.7.4\|	1
Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Rear Upper Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Upper Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Parking brake mechanism/associated mounting prescribed area is excessively corroded \|3.1.9\|	1
Exhaust system not adequately supported \|7.1.1\|	1
Offside Front Upper Suspension arm cracked \|2.4.G.1\|	1
Bonnet cannot be secured in the closed position \|8.4.1\|	1
Brakes imbalanced across an axle	1
Offside Front Upper Suspension arm has excessive play in a ball joint \|2.4.G.2\|	1
Windscreen wiper does not clear the windscreen effectively	1
Brake hose damaged	1
Front Vehicle structure has excessive corrosion which adversely affects braking or steering \|6.1.A.1\|	1

MOT History from tests of petrol BEDFORD CF220s year 1979

Find us on Facebook