>

MOT History from tests of diesel BEDFORD CF2s year 1986

Review the list of common BEDFORD CF2 failures below or to perform a specific mot history check on your BEDFORD then use our popular KnowYourCar service

mot history
Pass percent:46.88%
(The average a diesel BEDFORD CF2 year 1986 passes without issue)
Based on:64 MOT Tests
Most common failuresNo# failures
Brakes imbalanced across an axle9
Windscreen wiper does not clear the windscreen effectively7
Headlamp aim out of alignment6
Brake pipe excessively corroded6
Registration plate lamp issues5
Horn not working |1.6.2a|3
Parking brake: efficiency below requirements |3.7.B.7|3
Exhaust emits an excessive level of metered smoke for a non-turbo charged engine |7.4.B.3b|3
Fuel pipe leaking |7.2.3|3
Offside Steering rack gaiter split |2.2.D.2d|3
Service brake: efficiency below requirements |3.7.D.4|3
Offside Front Front position lamp|s| not working |1.1.A.3b|2
Fuel system component leaking |7.2.3|2
Exhaust has a major leak of exhaust gases |7.1.2|2
Exhaust system not adequately supported |7.1.1|2
Brake load sensing valve linkage seized |3.6.E.3|2
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|2
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|2
Rear fog lamp not working |1.3.2b|2
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3|2
Emissions not tested |7.0|2
Fuel tank leaking |7.2.3|2
Nearside Stop lamp not working |1.2.1b|2
Nearside Rear Direction indicator not working |1.4.A.2c|2
Service brake efficiency below requirements |1.2.2 |a| |i||1
Steering component mounting prescribed area is excessively corroded |2.1.2 |e| |i||1
Nearside Front Suspension arm pin or bush excessively worn |5.3.4 |a| |i||1
Nearside Front Lower Suspension arm pin or bush excessively worn |5.3.4 |a| |i||1
Offside Headlamp not working on dipped beam |4.1.1 |a| |ii||1
Offside Headlamp not working on main beam |4.1.1 |a| |ii||1
Offside Front position lamp|s| not working |1.1.A.3b|1
Nearside Front Upper Suspension arm has excessive play in a pin/bush |2.4.G.2|1
Offside Front Shock absorber insecure |2.7.2b|1
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6|1
Headlamp not working on dipped beam |1.7.5a|1
Headlamp not working on main beam |1.7.5a|1
Offside Side repeater not working |1.4.A.2c|1
Nearside Front Passenger`s seat insecure |6.2.A.1|1
Nearside Front position lamp|s| not working |1.1.A.3b|1
Nearside Rear Front position lamp|s| not working |1.1.A.3b|1
Nearside Front Track rod end ball joint has excessive play |2.2.B.1f|1
Offside Front Track rod end ball joint has excessive play |2.2.B.1f|1
Registration plate issues1
Rear brake application uneven1
Nearside Rear reflector missing |1.5.1a|1
Offside Rear reflector missing |1.5.1a|1
Nearside Headlamp aim aimed so that it dazzles other road users |1.8.A.1a|1
Exhaust mounting missing |7.1.1b|1
Exhaust has a part missing |7.1.1a|1
Front Seat belt anchorage prescribed area is excessively corroded |5.2.6|1
Nearside Rear Leaf spring has excessive wear in an anchor pin and/or bush |2.4.B.2|1
Offside Rear Leaf spring has excessive wear in an anchor pin and/or bush |2.4.B.2|1
Nearside Front Shock absorber has a serious fluid leak |2.7.3|1
Offside Front Shock absorber has a serious fluid leak |2.7.3|1
Nearside Front Lower Shock absorber insecure |2.7.2b|1
Nearside Rear Leaf spring has excessive wear in a shackle pin and/or bush |2.4.B.2|1
Offside Rear Leaf spring has excessive wear in a shackle pin and/or bush |2.4.B.2|1
Brake load sensing valve linkage obviously incorrectly adjusted |3.6.E.3|1
Nearside Front Headlamp not in good working order |not working| |1.2.4a|1
Offside Front Headlamp not in good working order |not working| |1.2.4a|1
Centre Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Nearside Inner Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Offside Inner Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a|1
Offside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a|1
Nearside Rear Leaf spring has a deteriorated anchor pin rubber bush resulting in excessive movement |2.4.B.2|1
Rear Brake load sensing valve inoperative |3.6.E.3|1
Nearside Front Headlamp not working on dipped beam |1.7.5a|1
Nearside Front Headlamp not working on main beam |1.7.5a|1
Nearside Rear Braking system leaking brake pipe |3.6.A.1|1
Offside Front Braking system leaking hub |3.6.A.1|1
Offside Front wheel bearing has excessive play |2.5.A.3c|1
Nearside Front wheel bearing has excessive play |2.5.A.3c|1
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b|1
Offside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a|1
Centre Exhaust system not adequately supported |7.1.1|1
Steering column shaft locking device insecure |2.1.6|1
Nearside Rear rear brake recording little or no effort |3.7.B.5a|1
Rear parking brake recording little or no effort1
Rear Exhaust system not adequately supported |7.1.1|1
Nearside Side repeater not working |1.4.A.2c|1
Offside Rear position lamp|s| insecure |1.1.A.3a|1
Nearside Front Body has a projection caused by corrosion |6.1.C.1|1
Offside Front Body has a projection caused by corrosion |6.1.C.1|1
Nearside Obligatory mirror insecure |8.1.1|1
Nearside Obligatory mirror does not provide a view to the rear |8.1.2b|1
Nearside Rear Shock absorber has a serious fluid leak |2.7.3|1
Offside Rear Shock absorber has a serious fluid leak |2.7.3|1
Nearside Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3|1
Offside Front Upper Ball joint has excessive play |2.2.B.1f|1
Nearside Front Front wheel bearing has excessive play |2.5.A.3c|1
Nearside Front Front wheel bearing rough when rotated |2.5.A.2|1
Offside Rear Upper Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|1
Nearside Front Direction indicator not working |1.4.A.2c|1
Offside Rear Rear fog lamp not working |1.3.2b|1
Rear fog lamp tell tale not working |1.3.1b|1
Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d|1
Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d|1
Nearside front brake binding |3.7.B.1|1
Rear Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f|1
Offside Front Steering component mounting prescribed area is excessively corroded |2.2.C.1h|1
Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3|1
Offside Front Brake actuating linkage mounting prescribed area is excessively corroded |3.3.A.2|1
Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3|1
Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|1
Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3|1
Offside Stop lamp not working |1.2.1b|1
Rear Mechanical brake component has restricted free movement1
Steering column top bearing excessively worn |2.1.2c|1
Offside Front Lower Seat belt anchorage prescribed area is deliberately modified which significantly reduces the original strength |5.2.6|1
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3|1
Front passenger door cannot be opened from outside the vehicle |6.2.B.1b|1
Offside Front wheel bearing rough when rotated |2.5.A.2|1
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6|1
Nearside Headlamp not working on dipped beam |1.7.5a|1
Service brake: efficiency below requirements |3.7.B.7|1
Nearside Rear Direction indicators not working |1.4.A.2c|1
Nearside Front Upper Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2|1
Offside Rear fog lamp not working |1.3.2b|1
Offside Windscreen wiper blade deteriorated |8.2.2|1
Nearside Steering rack gaiter split |2.2.D.2d|1
Service brake efficiency below requirements (1.2.2 (a) (i))1
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))1
Nearside Headlamp not working on main beam (4.1.1 (a) (ii))1
Rear fog lamp not working (4.5.1 (a) (ii))1
Rear fog lamp tell-tale missing (4.9.1 (a) (ii))1
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy