MOT History from tests of petrol BEDFORD CARAVANs year 1988

Review the list of common BEDFORD CARAVAN failures below or to perform a specific mot history check on your BEDFORD then use our popular KnowYourCar service

mot history

Pass percent:45.16%

(The average a petrol BEDFORD CARAVAN year 1988 passes without issue)

Based on:31 MOT Tests

Most common failures	No# failures
Windscreen wiper does not clear the windscreen effectively	7
Brakes imbalanced across an axle	3
Nearside Stop lamp not working \|1.2.1b\|	2
Offside Stop lamp not working \|1.2.1b\|	2
Nearside Front position lamp\|s\| not working \|1.1.A.3b\|	2
Offside Front Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	2
Horn not working \|1.6.2a\|	2
Headlamp aim out of alignment	2
Offside Rear Direction indicator not working \|1.4.A.2c\|	2
Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	2
Rear fog lamp tell tale not working \|1.3.1b\|	1
Rear fog lamp missing \|1.3.2a\|	1
Nearside Side repeater obviously incorrectly positioned \|1.4.A.2b\|	1
Offside Side repeater obviously incorrectly positioned \|1.4.A.2b\|	1
Rear fog lamp tell-tale not working \|4.9.1 \|a\| \|ii\|\|	1
Rear fog lamp not working \|1.3.2b\|	1
Offside Rear position lamp\|s\| adversely affected by the operation of another lamp \|1.1.A.3f\|	1
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement temp cap \|7.2.4b\|	1
Brake pipe excessively corroded	1
Offside Front position lamp\|s\| not working \|1.1.A.3b\|	1
Brake hose excessively deteriorated	1
Hazard warning lamps not flashing in phase, with ignition on \|1.4.B.1f\|	1
Hazard warning lamps not flashing in phase, with ignition off \|1.4.B.1f\|	1
Rear position lamp\|s\| adversely affected by the operation of another lamp \|1.1.A.3f\|	1
Offside Inner Front Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Inner Front Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Nearside Rear Stop lamp not working \|1.2.1b\|	1
Nearside Front Upper Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Upper Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
An item not tested \|Manual\|	1
Nearside Rear Direction indicator not working \|1.4.A.2c\|	1
Centre Rear Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Nearside Rear Stop lamp(s) with a multiple light source more than 1/2 not functioning (4.3.1 (a) (ii))	1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))	1
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))	1
Nearside Front Position lamp not working (4.2.1 (a) (ii))	1
Nearside Side repeater not working (4.4.1 (a) (ii))	1
Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))	1
Offside Front Position lamp not working (4.2.1 (a) (ii))	1
Registration plate lamp issues	1
Brake lever has insufficient reserve travel (1.1.2 (a))	1
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))	1
Nearside Rear Position lamp not working (4.2.1 (a) (ii))	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Windscreen wiper does not clear the windscreen effectively	7
Brakes imbalanced across an axle	3
Nearside Stop lamp not working \|1.2.1b\|	2
Offside Stop lamp not working \|1.2.1b\|	2
Nearside Front position lamp\|s\| not working \|1.1.A.3b\|	2
Offside Front Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	2
Horn not working \|1.6.2a\|	2
Headlamp aim out of alignment	2
Offside Rear Direction indicator not working \|1.4.A.2c\|	2
Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	2
Rear fog lamp tell tale not working \|1.3.1b\|	1
Rear fog lamp missing \|1.3.2a\|	1
Nearside Side repeater obviously incorrectly positioned \|1.4.A.2b\|	1
Offside Side repeater obviously incorrectly positioned \|1.4.A.2b\|	1
Rear fog lamp tell-tale not working \|4.9.1 \|a\| \|ii\|\|	1
Rear fog lamp not working \|1.3.2b\|	1
Offside Rear position lamp\|s\| adversely affected by the operation of another lamp \|1.1.A.3f\|	1
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement temp cap \|7.2.4b\|	1
Brake pipe excessively corroded	1
Offside Front position lamp\|s\| not working \|1.1.A.3b\|	1
Brake hose excessively deteriorated	1
Hazard warning lamps not flashing in phase, with ignition on \|1.4.B.1f\|	1
Hazard warning lamps not flashing in phase, with ignition off \|1.4.B.1f\|	1
Rear position lamp\|s\| adversely affected by the operation of another lamp \|1.1.A.3f\|	1
Offside Inner Front Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Inner Front Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Nearside Rear Stop lamp not working \|1.2.1b\|	1
Nearside Front Upper Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Upper Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
An item not tested \|Manual\|	1
Nearside Rear Direction indicator not working \|1.4.A.2c\|	1
Centre Rear Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Nearside Rear Stop lamp(s) with a multiple light source more than 1/2 not functioning (4.3.1 (a) (ii))	1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))	1
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))	1
Nearside Front Position lamp not working (4.2.1 (a) (ii))	1
Nearside Side repeater not working (4.4.1 (a) (ii))	1
Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))	1
Offside Front Position lamp not working (4.2.1 (a) (ii))	1
Registration plate lamp issues	1
Brake lever has insufficient reserve travel (1.1.2 (a))	1
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))	1
Nearside Rear Position lamp not working (4.2.1 (a) (ii))	1

MOT History from tests of petrol BEDFORD CARAVANs year 1988

Find us on Facebook