| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 5 |
| Brakes imbalanced across an axle | 5 |
| Front brake application uneven | 4 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 3 |
| Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 3 |
| Brake pipe excessively corroded | 2 |
| Rear brake application uneven | 2 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Wheel fitment excessively worn between the wheel and hub spigot mounting |4.2.B.5| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Nearside Steering rack gaiter split |2.2.D.2d| | 1 |
| Nearside Front Front wheel bearing rough when rotated |2.5.A.2| | 1 |
| Offside Front Lower Suspension arm attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Centre Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Bonnet cannot be secured in the closed position |3.1 |b| |i|| | 1 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Nearside Front Braking system leaking |3.6.A.1| | 1 |
| Exhaust engine idle speed too high |7.3.A.2a| | 1 |
| Bonnet retaining device ineffective |8.4.2| | 1 |
| Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Rear Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Direction indicators flashing less than 60 times a minute |1.4.A.2g| | 1 |
| front brakes release unevenly |3.7.B.4| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| rear brakes release unevenly |3.7.B.4| | 1 |
| Rear parking brake recording little or no effort | 1 |
| Nearside Rear Rear wheel bearing rough when rotated |2.6.1| | 1 |
| Nearside Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Offside Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Nearside Rear Valve stem seriously misaligned (5.2.3 (j)) | 1 |
| Offside Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Exhaust has a major leak of exhaust gases front exhaust (6.1.2 (a)) | 1 |
| Exhaust has a major leak of exhaust gases middle exhaust (6.1.2 (a)) | 1 |
| Exhaust has a major leak of exhaust gases rear exhaust (6.1.2 (a)) | 1 |
| Exhaust system insecure rear exhaust rubber (6.1.2 (a)) | 1 |
| Exhaust emissions hydrocarbon content excessive (8.2.1.2 (b)) | 1 |
| Prop shaft bearing excessively worn middle bearing (6.1.7 (b) (i)) | 1 |
| Body panel corroded and likely to cause injury bonnet corroded (6.2.1 (a) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting door step corroded in multiple places and insecure (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch corroded in multiple places (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor corroded in multiple places (6.2.2 (d) (i)) | 1 |
| Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill corroded in multiple places (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting door step corroded and insecure (6.2.2 (d) (i)) | 1 |
| Nearside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill corroded in multiple places (6.2.2 (d) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced engine bay (6.1.1 (c) (i)) | 1 |
| Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch (6.2.2 (d) (i)) | 1 |