Most common failures | No# failures |
---|
Registration plate lamp issues | 6 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
Brake pipe excessively corroded | 4 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 3 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Nearside Stop lamp not working |1.2.1b| | 2 |
Offside Front Shock absorber has negligible damping effect |2.7.5| | 2 |
Offside Stop lamp not working |1.2.1b| | 2 |
Nearside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
Rear brake application uneven | 2 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Rear parking brake recording little or no effort | 2 |
Windscreen wiper does not clear the windscreen effectively | 2 |
Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 1 |
Nearside rear brake grabbing severely |3.7.A.5b| | 1 |
Offside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Offside Rear wheel bearing rough when rotated |2.6.1| | 1 |
Offside Front Suspension component mounting prescribed area is fractured |2.4.A.3| | 1 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Emissions not tested |7.0| | 1 |
Brake cable has wires broken and is significantly weakened |3.5.1b| | 1 |
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Headlamp aim out of alignment | 1 |
Nearside Front Macpherson strut has excessive movement at the upper attachment |2.5.A.1c| | 1 |
Nearside Front constant velocity joint is insecure |2.5.C.1b| | 1 |
Offside Front constant velocity joint is insecure |2.5.C.1b| | 1 |
Offside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Nearside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Brake load sensing valve linkage seized |3.6.E.3| | 1 |
Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Front Shock absorber has negligible damping effect |2.7.5| | 1 |
Offside Rear Stop lamp not working |1.2.1b| | 1 |
Nearside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
Offside Front Front constant velocity joint is excessively worn |2.5.C.1b| | 1 |
Offside Front Vehicle structure has a modification which adversely affects braking or steering |6.1.A.1| | 1 |
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Nearside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Offside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Horn sounds harsh or grating |1.6.2e| | 1 |
Horn not loud enough to be heard by another road user |1.6.2b| | 1 |
Registration plate issues | 1 |
Brake servo vacuum pipe deteriorated |3.6.C.1b| | 1 |
Rear Mechanical brake component has restricted free movement | 1 |
Offside Brake pipe inadequately clipped |3.6.B.1| | 1 |
Rear Exhaust system not adequately supported |7.1.1| | 1 |
Service brake: efficiency below requirements |3.7.B.7| | 1 |
Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Lower Shock absorber has an excessively worn bush |2.7.4| | 1 |
Nearside Rear Lower Shock absorber has an excessively worn bush |2.7.4| | 1 |
Centre Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 1 |
Brakes imbalanced across an axle | 1 |