Most common failures | No# failures |
---|
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
Registration plate lamp issues | 6 |
Brake pipe excessively corroded | 5 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Offside Rear fog lamp not working |1.3.2b| | 4 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 4 |
Parking brake: efficiency below requirements |3.7.B.7| | 4 |
Brakes imbalanced across an axle | 4 |
Offside Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
Horn not working |1.6.2a| | 3 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Rear parking brake recording little or no effort | 3 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
Windscreen wiper does not clear the windscreen effectively | 3 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 3 |
Headlamp aim out of alignment | 3 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Nearside Stop lamp not working |1.2.1b| | 2 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Rear Upper Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 2 |
Rear brake application uneven | 2 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 2 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
Rear brake binding | 2 |
Brake hose excessively deteriorated | 2 |
Front brake application uneven | 1 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
Windscreen has damage | 1 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Rear Upper Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
Offside Stop lamp not working |1.2.1b| | 1 |
Fuel hose leaking |7.2.3| | 1 |
Offside Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
Nearside Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Braking system leaking |3.6.A.1| | 1 |
Fuel system component insecure |7.2.1| | 1 |
Offside Rear Lower Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Offside Body has a sharp edge caused by damage |6.1.C.1| | 1 |
Nearside Front Direction indicator insecure |1.4.A.2b| | 1 |
Brake pedal anti-slip provision missing |3.3.A.1b| | 1 |
Offside Rear Coil spring mounting corroded and seriously weakened |2.4.C.3c| | 1 |
Offside Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Rear Lower Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Lower Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Registration plate issues | 1 |
Offside Rear Rear fog lamp not working |1.3.2b| | 1 |
Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Brake performance not tested |3.7.A.1| | 1 |
Emissions not tested |7.0| | 1 |
Service brake: efficiency below requirements |3.7.B.7| | 1 |
Offside Rear Suspension spring mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Nearside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Offside Front front brake binding |3.7.B.1| | 1 |
Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Nearside Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Nearside Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Brake pipe inadequately clipped |3.6.B.1| | 1 |
Offside Rear Shock absorber has negligible damping effect |2.7.5| | 1 |
Nearside Front Lower Ball joint has excessive play |2.2.B.1f| | 1 |
Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Exhaust emits an excessive level of metered smoke for a non-turbo charged engine |7.4.B.3b| | 1 |