MOT History from tests of petrol BAOTIAN SPEEDYs year 2008

Review the list of common BAOTIAN SPEEDY failures below or to perform a specific mot history check on your BAOTIAN then use our popular KnowYourCar service

mot history

Pass percent:68.18%

(The average a petrol BAOTIAN SPEEDY year 2008 passes without issue)

Based on:22 MOT Tests

Most common failures	No# failures
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	2
Exhaust is leaking and excessively noisey \|7.1.1b\|	2
Front wheel bearings are excessively rough \|2.3.5b\|	2
Front Upper Steering headbearing has excessive free play \|2.2.2\|	1
Horn is not continous or uniform \|1.7.3c\|	1
Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking \|6.1.1c\|	1
Rear position lamp adversely affected by the operation of another lamp \|1.1.3b\|	1
Nearside Rear Direction indicator not working \|1.5.1c\|	1
Offside Position lamp switch insecure \|1.1.4b\|	1
Nearside Brake lever has inadequate reserve travel \|3.1.3b\|	1
Front wheel bearings have excessive free play \|2.3.5b\|	1
Brake hose excessively deteriorated	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Front Stop lamp does not emit a steady light \|1.3.1b\|	1
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	1
Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	1
Front Brake lever is inoperative \|3.1.3c\|	1
Front Brake lever is damaged and the brake cannot be readily applied \|3.1.3c\|	1
Rear Brake lever is bent and the brake cannot be readily applied \|3.1.3c\|	1
Handlebar deformed \|2.1.1b\|	1
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	1
Front Position lamp not working (4.2.1 (a))	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	2
Exhaust is leaking and excessively noisey \|7.1.1b\|	2
Front wheel bearings are excessively rough \|2.3.5b\|	2
Front Upper Steering headbearing has excessive free play \|2.2.2\|	1
Horn is not continous or uniform \|1.7.3c\|	1
Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking \|6.1.1c\|	1
Rear position lamp adversely affected by the operation of another lamp \|1.1.3b\|	1
Nearside Rear Direction indicator not working \|1.5.1c\|	1
Offside Position lamp switch insecure \|1.1.4b\|	1
Nearside Brake lever has inadequate reserve travel \|3.1.3b\|	1
Front wheel bearings have excessive free play \|2.3.5b\|	1
Brake hose excessively deteriorated	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Front Stop lamp does not emit a steady light \|1.3.1b\|	1
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	1
Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	1
Front Brake lever is inoperative \|3.1.3c\|	1
Front Brake lever is damaged and the brake cannot be readily applied \|3.1.3c\|	1
Rear Brake lever is bent and the brake cannot be readily applied \|3.1.3c\|	1
Handlebar deformed \|2.1.1b\|	1
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	1
Front Position lamp not working (4.2.1 (a))	1

MOT History from tests of petrol BAOTIAN SPEEDYs year 2008

Find us on Facebook