MOT History from tests of petrol BAOTIAN BT49QTs year 2008

Review the list of common BAOTIAN BT49QT failures below or to perform a specific mot history check on your BAOTIAN then use our popular KnowYourCar service

mot history

Pass percent:26.67%

(The average a petrol BAOTIAN BT49QT year 2008 passes without issue)

Based on:15 MOT Tests

Most common failures	No# failures
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	3
Steering headbearing has excessive free play \|2.2.2\|	3
Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	3
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	2
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	2
Headlamp insecure \|1.2.3b\|	2
Headlamp aim out of alignment	2
Horn not working \|1.7.3a\|	2
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	2
Nearside Rear Direction indicator not working \|1.5.1c\|	1
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	1
Rear Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	1
Rear wheel has a loose wheel nut\|s\| \|4.2.3a\|	1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	1
Rear reflector on motorcycle missing \|1.4.1\|	1
Front mudguard insecure \|2.3.7\|	1
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Rear suspension bush excessively deteriorated \|2.4.A2a\|i\|\|	1
Nearside Front Direction indicator not working \|1.5.1c\|	1
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	1
Brake lever has inadequate reserve travel \|3.1.3b\|	1
Nearside Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Offside Front Direction indicators not working \|1.5.1c\|	1
Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	1
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	1
Front wheel bearings are excessively rough \|2.3.5b\|	1
Front Brake caliper\|s\| insecure \|3.2.A1j\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	3
Steering headbearing has excessive free play \|2.2.2\|	3
Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	3
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	2
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	2
Headlamp insecure \|1.2.3b\|	2
Headlamp aim out of alignment	2
Horn not working \|1.7.3a\|	2
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	2
Nearside Rear Direction indicator not working \|1.5.1c\|	1
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	1
Rear Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	1
Rear wheel has a loose wheel nut\|s\| \|4.2.3a\|	1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	1
Rear reflector on motorcycle missing \|1.4.1\|	1
Front mudguard insecure \|2.3.7\|	1
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Rear suspension bush excessively deteriorated \|2.4.A2a\|i\|\|	1
Nearside Front Direction indicator not working \|1.5.1c\|	1
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	1
Brake lever has inadequate reserve travel \|3.1.3b\|	1
Nearside Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Offside Front Direction indicators not working \|1.5.1c\|	1
Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	1
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	1
Front wheel bearings are excessively rough \|2.3.5b\|	1
Front Brake caliper\|s\| insecure \|3.2.A1j\|	1

MOT History from tests of petrol BAOTIAN BT49QTs year 2008

Find us on Facebook