| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 41 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 17 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 17 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 16 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 15 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 13 |
| Steering headbearing has excessive free play |2.2.2| | 12 |
| Horn not working |1.7.3a| | 9 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 8 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 8 |
| Front wheel bearings have excessive free play |2.3.5b| | 7 |
| Registration plate issues | 6 |
| Headlamp insecure |1.2.3b| | 6 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Rear reflector on motorcycle missing |1.4.1| | 6 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 5 |
| Handlebar mounting clamp loose |2.1.1a| | 5 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Offside Rear Direction indicators not working |1.5.1c| | 5 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 5 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Throttle operating incorrectly |6.2.1f| | 5 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 5 |
| Front wheel bearings are excessively rough |2.3.5b| | 4 |
| Riders seat insecure |6.2.1a| | 4 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 4 |
| Front Brake excessively binding (1.2.1 (f)) | 3 |
| Offside Front Direction indicator incorrect colour |1.5.1b| | 3 |
| Nearside Rear Direction indicator not working |1.5.1c| | 3 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Front Valve stem seriously damaged (5.2.3 (j)) | 3 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 3 |
| Front Front mudguard insecure |2.3.7| | 3 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 3 |
| Nearside Brake lever has inadequate reserve travel |3.1.3b| | 3 |
| Offside Rear Direction indicator not working |1.5.1c| | 3 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
| Nearside Rear Direction indicator incorrect colour |1.5.1b| | 3 |
| Offside Rear Direction indicator incorrect colour |1.5.1b| | 3 |
| Offside Front Direction indicators not working |1.5.1c| | 3 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 3 |
| Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 3 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 3 |
| Direction indicator incorrect colour |1.5.1b| | 3 |
| Nearside Rear Direction indicators not working |1.5.1c| | 3 |
| Engine mounting/bracket damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i)) | 2 |
| Rear position lamp incorrect colour |1.1.2b| | 2 |
| Stop lamp emits other than a steady red light |1.3.1b| | 2 |
| Exhaust has part of the system missing |7.1.1a| | 2 |
| Rear Valve stem seriously damaged (5.2.3 (j)) | 2 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 2 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
| Horn is not continous or uniform |1.7.3c| | 2 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 2 |
| Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
| Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Headlamp aim beam image kick up to the offside |1.6| | 2 |
| An item not tested |Manual| | 2 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
| Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 2 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
| Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
| Nearside Front Direction indicator incorrect colour |1.5.1b| | 2 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Front Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
| Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 2 |
| Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Direction indicators not working |1.5.1c| | 2 |
| Indicator switch defective |1.5.4| | 2 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Offside Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 2 |
| Nearside Brake lever insecure |3.1.2a| | 2 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 2 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
| Fairings insecure and likely to impede the steering |2.1.2e| | 2 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 2 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
| Front Direction indicator incorrect colour both |1.5.1b| | 2 |
| Centre Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
| Handlebar grip insecure to handlebar throttle grip (2.2.1 (d) (ii)) | 1 |
| Stop lamp not working front and rear (4.3.1 (a) (ii)) | 1 |
| Handlebar retaining device loose (2.2.1 (b) (i)) | 1 |
| Handlebar mounting insecure (2.2.1 (a) (i)) | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Roller brake test indicates a binding brake rear |3.3.A1a| | 1 |
| Front mudguard insecure rear |2.3.7| | 1 |
| Steering movement excessively rough with the weight on the lower bearing |2.2.1a| | 1 |
| Indicator switch insecure |1.5.4| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Upper Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Position lamp switch faulty |1.1.4a| | 1 |
| Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
| Position lamp not working dip beam (4.2.1 (a)) | 1 |
| Nearside Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking mudguard mounting bolt missing |6.1.1c| | 1 |
| Front Stop lamp affected by the operation of the horn |1.3.2| | 1 |
| Rear Stop lamp affected by the operation of the horn |1.3.2| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Front Brake master cylinder severely corroded master cylinder inspection glass leaking |3.2.B1b| | 1 |
| Rear Rear suspension bush excessively deteriorated engine mounts |2.4.A2a|i|| | 1 |
| Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Position lamp not working (4.2.1 (a)) | 1 |
| Nearside Stop lamp does not illuminate immediately a brake applies lever |1.3.1a| | 1 |
| Rear suspension component loose complete suspension unit |2.4.A.1a| | 1 |
| Seat insecure |6.2.1a| | 1 |
| Front Lower Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Front Hydraulic brake control creeps under load. |3.1.4a| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Front suspension assembly component excessively corroded. |2.3.1| | 1 |
| Front Brake disc|s| excessively pitted |3.2.A1l| | 1 |
| Fork yoke in such a condition that steering control is adversely affected |2.2.2 |d| |ii|| | 1 |
| Headlamp incorrect colour |1.2.1| | 1 |
| Offside Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected cable kinked (6.2.7 (a) (ii)) | 1 |
| Riders seat with a defective supporting structure hard to lock & open (6.2.5 (a) (i)) | 1 |
| Nearside Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Offside Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Registration plate lamp issues | 1 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Roller brake test No brake control achieves an efficiency of 30% (1.2.2 (a) (i)) | 1 |
| Direction indicator not working |1.5.1c| | 1 |
| Headlamp switch faulty |1.2.4| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear suspension fouling which affects the movement of the rear suspension centre stand |2.4.A.3a| | 1 |
| Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking airbox insecure has no fixings |6.1.1c| | 1 |
| Rear Valve stem seriously misaligned (5.2.3 (j)) | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Rear Brake component is severely distorted |3.1.5| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Nearside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Offside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Nearside Front Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Offside Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Rear Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Nearside Rear Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
| Nearside Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Rear suspension component loose |2.4.A.1a| | 1 |
| Nearside Direction indicators not working |1.5.1c| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Rear suspension has a modification which reduces the strength of a load bearing member or its supporting structure. Engine mounting |2.4.A.2d| | 1 |
| Rear Headlamp incorrect colour |1.2.1| | 1 |
| Direction indicators not working Low battery voltage |1.5.1c| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Front mudguard insecure |2.3.7| | 1 |
| Rear suspension component misaligned |2.4.A.1a| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Nearside Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear Brake locking device insecure |3.2.A1e| | 1 |
| Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Front Brake excessively binding |1.2.1 |f|| | 1 |
| Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Engine mounting/bracket damaged or deteriorated resulting in excessive movement |6.1.8 |a| |i|| | 1 |
| Nearside Rear All direction indicators incorrect colour (4.4.3 (a)) | 1 |
| Offside Rear All direction indicators adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
| Rear Wheel damaged or distorted to the extent that control of the motorcycle is likely to be adversely affected (5.2.2 (c) (ii)) | 1 |
| Fuel cap leaking (6.1.3 (b) (i)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Steering linkage has excessive free play |2.2.2| | 1 |
| Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
| Nearside Direction indicator not working |1.5.1c| | 1 |
| Offside Direction indicator not working |1.5.1c| | 1 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Front Front mudguard can easily contact any fixed point of the motor bicycle. |2.3.7| | 1 |
| Front position lamp insecure |1.1.1c| | 1 |
| Nearside Front Shock absorber has a serious fluid leak Fork seal Leaking |5.3.2 |b|| | 1 |
| Offside Front Shock absorber has a serious fluid leak Fork seal Leaking |5.3.2 |b|| | 1 |
| Rear Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Shock absorber has negligible damping effect Front forks have no damping and suspension bottoms out, caused by lack of oil from seal leakage |5.3.2 |b|| | 1 |
| Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
| Front Brake disc contaminated Fork oil on disc |1.1.14 |b|| | 1 |
| Rear suspension bush excessively deteriorated N/s engine bush |2.4.A2a|i|| | 1 |
| Rear suspension bush has excessive free play Engine bushes
|2.4.A2a|i|| | 1 |
| Direction indicator not working Both rear |1.5.1c| | 1 |
| Rear suspension bush has excessive free play Both engine |2.4.A2a|i|| | 1 |
| Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
| Suspension component pin or bush excessively worn top of rear shock absorber |5.3.4 |a| |i|| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Horn control defective |1.7.2a| | 1 |
| Nearside Brake lever attachment screws missing pivot lock nut missing |3.1.2b| | 1 |
| Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
| Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |
| Rear Brake performance not tested rear brake so poor the brake tester couldnt read it |3.3| | 1 |
| Motorcycle structure cracked center stand cracked |6.1.1a| | 1 |
| Rear Brake linkage excessively damaged |3.2.A1c| | 1 |
| Rear Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on rear not working |1.1.3a| | 1 |
| Rear Brake lever pivot has excessive free play (1.1.1 (b)) | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Fuel cap does not fasten securely by a positive means |7.2.2b| | 1 |
| Offside Outer Direction indicator insecure |1.5.3b| | 1 |
| Nearside Front suspension assembly component excessively corroded. |2.3.1| | 1 |
| Offside Front suspension assembly component excessively corroded. |2.3.1| | 1 |
| Front Brake master cylinder severely corroded |3.2.B1b| | 1 |
| Brake hose excessively deteriorated | 1 |
| All direction indicators incorrect colour |4.4.3 |a|| | 1 |
| Exhaust silencer likely to become detached |8.1.1 |b| |ii|| | 1 |
| Roller brake test No brake control achieves an efficiency of 30% |1.2.2 |a| |i|| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Position lamp switch insecure |1.1.4b| | 1 |
| Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Front Brake caliper|s| insecure |3.2.A1j| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Rear reflector on motorcycle obscured |1.4.1| | 1 |
| Rear reflector on motorcycle obscured |1.4.2b| | 1 |
| Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Stop lamp does not illuminate immediately a brake applies when rear brake applied |1.3.1a| | 1 |
| Horn not working (7.7 (a)) | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Front Headlamp insecure |1.2.3b| | 1 |
| Front position lamp incorrect colour |1.1.2a| | 1 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Front suspension assembly component excessively bent |2.3.1| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
| Offside Direction indicator insecure |1.5.3b| | 1 |
| Nearside Direction indicator insecure |1.5.3b| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Rear Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Front Headlamp aim unable to be tested (4.1.2 (b)) | 1 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Stop lamp does not illuminate immediately a brake applies front+rear |1.3.1a| | 1 |
| Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Central Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Nearside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Centre Front Headlamp insecure |1.2.3b| | 1 |
| Centre Rear Rear position lamp insecure |1.1.1c| | 1 |
| Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Offside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Centre Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Centre Front Horn not working |1.7.3a| | 1 |
| Nearside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Rear Brake lever pivots excessively worn |3.1.3a| | 1 |
| Fuel cap sealing washer torn |7.2.2c| | 1 |
| Direction indicator incorrect colour all four |1.5.1b| | 1 |
| Nearside Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Offside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Nearside Rear Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Offside Rear Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
| Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Front Front position lamp damaged and function impaired both |1.1.1b| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Nearside Brake lever cannot be released smoothly |3.1.3d| | 1 |
| Nearside Front Brake lever pivots excessively worn |3.1.3a| | 1 |
| Front Direction indicator not working |1.5.1c| | 1 |
| Rear Brake lever has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f)) | 1 |
| Front Brake fluid reservoir fluid not visible |1.1.10 |d| |iii|| | 1 |
| Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
| Rear Suspension component pin or bush excessively worn engine pivot bushes |5.3.4 |a| |i|| | 1 |
| Headlamp switch faulty dip switch |1.2.4| | 1 |
| Rear reflector on motorcycle obscured L plate |1.4.2b| | 1 |
| Rear shock absorber has inadequate damping effect. NO damping effect at all |2.4.A.3b| | 1 |
| Nearside Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Centre Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Upper Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Front position lamp adversely affected by the operation of the horn |1.1.3b| | 1 |
| Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 1 |
| Headlamp main beam affected by the operation of the horn |1.2.2c| | 1 |
| Horn is not a constant note |1.7.3c| | 1 |
| Nearside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Offside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Handlebar mounting clamp loose handle bars turn whilst wheel is held straight |2.1.1a| | 1 |
| Headlamp aim headlamp damaged and function impaired melted and beam impaired |1.2.3a| | 1 |
| Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.4 |a|| | 1 |
| Riders seat insecure |6.2.5 |a| |ii|| | 1 |
| Rear wheel insecure |4.2.3b| | 1 |
| Front Headlamp missing |4.1.1 |a| |ii|| | 1 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Offside Rear Direction indicators not working incorrect colour |1.5.1c| | 1 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Brake fluid reservoir fluid not visible |1.1.10 |d| |iii|| | 1 |
| Stop lamp light intensity significantly reduced |4.3.3 |a| |ii|| | 1 |
| Front Position lamp not working |4.2.1 |a|| | 1 |
| Direction indicator incorrect colour all |1.5.1b| | 1 |