| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 49 |
| Steering headbearing has excessive free play |2.2.2| | 21 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 16 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 14 |
| Nearside Rear Direction indicators not working |1.5.1c| | 11 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 11 |
| Rear reflector on motorcycle missing |1.4.1| | 10 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 10 |
| Horn not working |1.7.3a| | 10 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
| Headlamp insecure |1.2.3b| | 9 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 8 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
| Front wheel bearings have excessive free play |2.3.5b| | 7 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 7 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 6 |
| Nearside Rear Direction indicator not working |1.5.1c| | 6 |
| Registration plate issues | 6 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 5 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Offside Rear Direction indicator not working |1.5.1c| | 5 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 5 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 4 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 4 |
| Nearside Front Direction indicator not working |1.5.1c| | 4 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
| Throttle operating incorrectly |6.2.1f| | 4 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Headlamp aim beam image kick up to the offside |1.6| | 3 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 3 |
| Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 3 |
| Nearside Brake lever has inadequate reserve travel |3.1.3b| | 3 |
| Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 3 |
| Exhaust excessively deteriorated |7.1.1a| | 3 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 3 |
| Brake lever has inadequate reserve travel |3.1.3b| | 3 |
| Offside Rear Direction indicators not working |1.5.1c| | 3 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 3 |
| Nearside Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 3 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Front Valve stem seriously damaged (5.2.3 (j)) | 2 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 2 |
| Direction indicators not working |1.5.1c| | 2 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 2 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 2 |
| Rear reflector on motorcycle obscured |1.4.1| | 2 |
| Indicator switch defective |1.5.4| | 2 |
| Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 2 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Front suspension has inadequate damping effect. |2.3.6c| | 2 |
| Brake hose excessively deteriorated | 2 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 2 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
| Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 2 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Headlamp deteriorated and function impaired |1.2.3a| | 2 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 2 |
| Headlamp aim not tested |1.6| | 2 |
| Front suspension assembly component excessively misaligned |2.3.1| | 2 |
| Nearside Rear Direction indicator incorrect colour |1.5.1b| | 2 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Front wheel bearings are excessively rough |2.3.5b| | 2 |
| Offside Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
| Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
| Nearside Front Direction indicator insecure |1.5.3b| | 2 |
| Offside Front Direction indicator insecure |1.5.3b| | 2 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
| Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
| Brake linkage excessively damaged |3.2.A1c| | 1 |
| Nearside Front Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
| Offside Front Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
| Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Indicator tell tale not functioning |1.5.2| | 1 |
| Front suspension assembly component excessively bent |2.3.1| | 1 |
| Front mudguard can easily contact any fixed point of the motor bicycle. |2.3.7| | 1 |
| Rear Brake lever cannot be released smoothly |3.1.3d| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Handlebar mounting clamp loose |2.1.1a| | 1 |
| Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
| Nearside Indicator tell tale not functioning |1.5.2| | 1 |
| Riders seat insecure |6.2.5 |a| |ii|| | 1 |
| Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
| Centre Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Centre Rear Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
| Centre Rear Fuel cap sealing washer missing |7.2.2c| | 1 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies off rear brake lever |1.3.1a| | 1 |
| Front mudguard insecure |2.3.7| | 1 |
| Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Offside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Exhaust mounting missing |7.1.1c| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Centre Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Centre Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Nearside Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Offside Front Upper Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Nearside Stop lamp does not illuminate immediately a brake applies lever |1.3.1a| | 1 |
| Rear Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Headlamp insecure top trim edge not secured to speedo trim |1.2.3b| | 1 |
| Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Direction indicator incorrect colour |1.5.1b| | 1 |
| Front Brake lever cannot be released smoothly |3.1.3d| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front Throttle operating incorrectly |6.2.1f| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Rear Motorcycle structure excessively damaged |6.1.1a| | 1 |
| Rear Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
| Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Front Front mudguard insecure |2.3.7| | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear Lower Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
| Nearside Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
| Offside Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
| Stop lamp adversely affected by the operation of another lamp Battery needs connection (4.3.3 (b)) | 1 |
| Rear Stop lamp not working rear brake switch inoperative rear brake light does not illuminate (4.3.1 (a) (ii)) | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
| Rear Brake lever insecure |3.1.2a| | 1 |
| Nearside Rear Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
| Offside Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Front Steering linkage has excessive free play handle bars move side to side |2.2.2| | 1 |
| Handlebar retaining device loose (2.2.1 (b) (i)) | 1 |
| Throttle operating incorrectly throttle rises on right hand lock.. Cable Adjusted. (6.2.7 (a) (i)) | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Front Brake component is fractured |3.1.5| | 1 |
| Horn is not continous or uniform |1.7.3c| | 1 |
| Wheel more than one fixing missing Speedo drive not dogged in correctly (5.2.1 (a) (ii)) | 1 |
| Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
| Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
| Rear Direction indicators not working |1.5.1c| | 1 |
| Rear An item not tested |Manual| | 1 |
| Horn is not a constant note |1.7.3c| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Handlebar mounting clamp loose handle bars loose |2.1.1a| | 1 |
| Nearside Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Offside Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Nearside Rear Upper Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
| Brake hose damaged | 1 |
| Rear mono-shock insecure |2.4.B.4| | 1 |
| Rear suspension component loose lower mounting bolt damaged |2.4.A.1a| | 1 |
| Rear position lamp missing |1.1.1a| | 1 |
| Fuel pipe union leaking |7.2.1a| | 1 |
| Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Nearside Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Rear Upper Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Upper Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
| Nearside Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
| Offside Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
| Nearside Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
| Fuel cap sealing washer torn |7.2.2c| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Lower Steering headbearing has excessive free play |2.2.2| | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Stop lamp does not illuminate immediately a brake applies rear brake |1.3.1a| | 1 |
| Fuel cap leaking seal damaged |6.1.3 |b| |i|| | 1 |
| Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
| Suspension component mounting modified so the suspension is likely to fail other components centre stand fouling rear suspension stopping full travel and stopping it from returning |5.3.3 |c| |ii|| | 1 |
| Upper Steering headbearing has excessive free play |2.2.2| | 1 |
| Decelerometer brake test the less effective brake control does not achieve an efficiency of 25%. |3.3.E1b| | 1 |
| Rear Brake cylinder insecurely mounted |3.2.B1a| | 1 |
| Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Fairings so located that it is likely to impede the steering |2.1.2e| | 1 |
| Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Rear Suspension arm ball joint excessively worn rear engine|swing arm bush| |5.3.4 |a| |i|| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort Front brake disc warped and reading 37% ovality on roller brake test |3.3.A1d| | 1 |
| Front suspension assembly component excessively corroded. |2.3.1| | 1 |
| Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Nearside Front Brake pipe excessively damaged |3.2.B2a| | 1 |
| All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Nearside Front Brake lever attachment screws loose |3.1.2b| | 1 |
| Engine mounting/bracket bracket excessively loose BOTH MAIN BUSHES HOLDING ENGINE TO FRAME (6.1.8 (a) (ii)) | 1 |
| Riders seat insecure (6.2.5 (a) (ii)) | 1 |
| Front Valve stem seriously damaged |5.2.3 |j|| | 1 |
| Rear Valve stem seriously damaged |5.2.3 |j|| | 1 |
| Rear Wheel damaged significantly reducing the original strength |4.2.1a| | 1 |
| Stop lamp not working when front brake and rear brake applied (4.3.1 (a) (ii)) | 1 |
| Registration plate lamp issues | 1 |
| Front Valve stem seriously damaged split/perrished (5.2.3 (j)) | 1 |
| Front Shock absorber has negligible damping effect both shock absorbers (5.3.2 (b)) | 1 |
| Front Position lamp switch faulty |1.1.4a| | 1 |
| Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Nearside Direction indicator not working |1.5.1c| | 1 |
| Offside Direction indicator not working |1.5.1c| | 1 |
| Headlamp switch faulty |1.2.4| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies rear brake switch faulty |1.3.1a| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Nearside Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Rear Rear wheel insecure |4.2.3b| | 1 |
| Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Offside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Brake performance not tested |3.3| | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Central Engine mounting/bracket excessively loose mounting bush lots of side play engine mount (6.1.8 (a) (ii)) | 1 |
| Central Suspension component mounting has an unsafe modification mounting bush worn (5.3.3 (c) (i)) | 1 |
| Shock absorber has a serious fluid leak both front and badly pitted (5.3.2 (b)) | 1 |
| Rear reflector reflecting white to the rear (4.8.2 (a) (ii)) | 1 |
| Front Headlamp aim not tested |1.6| | 1 |
| Handlebar so insecure it is likely to become detached (2.2.1 (b) (ii)) | 1 |
| Stop lamp remains on when the brakes are released | 1 |