Most common failures | No# failures |
---|
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 9 |
Headlamp aim out of alignment | 7 |
Windscreen wiper does not clear the windscreen effectively | 3 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Parking brake: efficiency below requirements |3.7.B.7| | 3 |
Brakes imbalanced across an axle | 2 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
Rear parking brake recording little or no effort | 1 |
Nearside Rear Stop lamp not working |1.2.1b| | 1 |
Nearside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Nearside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
Nearside Front Shock absorbers has a serious fluid leak | 1 |
Nearside Rear Shock absorbers has a serious fluid leak | 1 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Rear brake binding | 1 |
Rear fog lamp tell tale not working |1.3.1b| | 1 |
Nearside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Nearside Parking brake is not capable of being maintained in operation by direct mechanical action only |3.1.2| | 1 |
Nearside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |
Offside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
Nearside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
Offside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
Nearside Front Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
Brake pedal spongy |3.3.B.1b| | 1 |
Nearside Front Steering rack gaiter split |2.2.D.2d| | 1 |
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Steering rack gaiter split |2.2.D.2d| | 1 |
Nearside Windscreen wiper blade deteriorated |8.2.2| | 1 |
Nearside Outer Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Inner Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Outer Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Inner Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Centre Front Upper Fuel system component leaking |7.2.3| | 1 |
Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Registration plate issues | 1 |
Offside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Front brake application uneven | 1 |
front brakes release unevenly |3.7.B.4| | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Offside Front Shock absorber has negligible damping effect |2.7.5| | 1 |
Nearside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Inner Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |