Most common failures | No# failures |
---|
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 131 |
Headlamp aim out of alignment | 120 |
Windscreen wiper does not clear the windscreen effectively | 94 |
Parking brake: efficiency below requirements |3.7.B.7| | 71 |
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 60 |
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 58 |
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 55 |
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 50 |
Service brake: efficiency below requirements |3.7.B.7| | 49 |
Rear parking brake recording little or no effort | 43 |
Offside Side repeater not working |1.4.A.2c| | 37 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 32 |
Registration plate lamp issues | 31 |
Offside rear brake recording little or no effort |3.7.B.5a| | 30 |
Offside Rear fog lamp not working |1.3.2b| | 29 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 28 |
Nearside Side repeater not working |1.4.A.2c| | 27 |
Nearside Stop lamp not working |1.2.1b| | 27 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 26 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 26 |
Brakes imbalanced across an axle | 25 |
Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 24 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 24 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 24 |
Offside Stop lamp not working |1.2.1b| | 23 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 22 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 21 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 21 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 20 |
Exhaust has a major leak of exhaust gases |7.1.2| | 19 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 17 |
Nearside Front Side repeater not working |1.4.A.2c| | 16 |
Rear brake binding | 15 |
Brake pipe excessively corroded | 15 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 14 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 14 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 14 |
Offside Rear Rear fog lamp not working |1.3.2b| | 14 |
Brake hose excessively deteriorated | 14 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 13 |
Registration plate issues | 13 |
Rear brake application uneven | 13 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 13 |
Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 12 |
Offside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 12 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 11 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 11 |
Offside Front Windscreen wiper blade deteriorated |8.2.2| | 11 |
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 10 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 10 |
Nearside Front Windscreen wiper blade deteriorated |8.2.2| | 10 |
Offside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 10 |
Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 10 |
Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 9 |
Offside Front Side repeater not working |1.4.A.2c| | 9 |
Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 9 |
Offside Rear Braking system leaking |3.6.A.1| | 9 |
Nearside Windscreen wiper blade deteriorated |8.2.2| | 9 |
Nearside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 8 |
Offside Windscreen wiper blade deteriorated |8.2.2| | 8 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 8 |
Offside Rear rear brake recording little or no effort |3.7.B.5a| | 8 |
Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 7 |
Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 7 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 7 |
Offside Headlamp not working on dipped beam |1.7.5a| | 7 |
Rear Sub-frame corroded and seriously weakened |2.4.G.1| | 7 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 7 |
Front Fluid suspension has no suspension movement |2.4.D.5| | 7 |
Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 7 |
Offside Front Suspension has inadequate clearance with the bump stop |2.4.A.1a| | 6 |
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 6 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 6 |
Offside Track rod end ball joint has excessive play |2.2.B.1f| | 6 |
Front Suspension has inadequate clearance with the bump stop |2.4.A.1a| | 6 |
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 6 |
Nearside Front wheel bearing has excessive play |2.5.A.3c| | 6 |
Offside Front Headlamp not working on dipped beam |1.7.5a| | 6 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 6 |
Offside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 6 |
Offside Headlamp insecure |1.7.3| | 6 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 6 |
Rear Stop lamp not working |1.2.1b| | 6 |
Nearside Front Fluid suspension unit totally deflated |2.4.D.1a| | 5 |
Offside Front Fluid suspension unit totally deflated |2.4.D.1a| | 5 |
Parking brake lever has no reserve travel |3.1.6b| | 5 |
Rear Fluid suspension has no suspension movement |2.4.D.5| | 5 |
Nearside Front Suspension has inadequate clearance with the bump stop |2.4.A.1a| | 5 |
Offside Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
Nearside Rear Radius arm has excessive play in a pin/bush |2.4.G.2| | 5 |
Offside Rear Sub-frame attachment rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 5 |
Offside Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 5 |
Hazard warning switch faulty |1.4.B.1d| | 5 |
Fuel tank leaking |7.2.3| | 5 |
Nearside Headlamp aim beam image kick up to the offside |1.8| | 5 |
Offside Rear Stop lamp not working |1.2.1b| | 5 |
Emissions not tested |7.0| | 5 |
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 5 |
Windscreen has damage | 5 |
Offside Obligatory mirror missing |8.1.1| | 4 |
Centre Exhaust system not adequately supported |7.1.1| | 4 |
Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
Nearside Rear Sub-frame attachment rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 4 |
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
Offside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 4 |
Offside Inner Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Nearside Front Upper Ball joint has excessive play |2.2.B.1f| | 4 |
Offside Rear Suspension has inadequate clearance with the bump stop |2.4.A.1a| | 4 |
Nearside Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 4 |
Offside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
Battery insecure |1.9.1| | 4 |
Rear Mechanical brake component has restricted free movement | 4 |
Indicator switch faulty |1.4.A.1| | 4 |
Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
Nearside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 4 |
Nearside Rear Fluid suspension unit supply pipe corroded and seriously weakened |2.4.D.3| | 4 |
Nearside Headlamp insecure |1.7.3| | 4 |
Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Nearside Rear Subframe mounting prescribed area is inadequately repaired |2.4.A.3| | 4 |
Offside Rear Fluid suspension unit totally deflated |2.4.D.1a| | 4 |
Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 4 |
Offside Front Sub-frame attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 4 |
Offside Rear Fluid suspension unit supply pipe corroded and seriously weakened |2.4.D.3| | 4 |
Rear Exhaust system not adequately supported |7.1.1| | 4 |
Horn not working |1.6.2a| | 4 |
Offside Front wheel bearing has excessive play |2.5.A.3c| | 4 |
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 3 |
Nearside Rear Stop lamp not working |1.2.1b| | 3 |
Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 3 |
Offside Front Front wheel bearing rough when rotated |2.5.A.2| | 3 |
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 3 |
Offside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 3 |
Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 3 |
Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 3 |
Nearside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 3 |
Offside Front Lower Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Exhaust system not adequately supported |7.1.1| | 3 |
Offside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 3 |
Nearside Front wheel bearing rough when rotated |2.5.A.2| | 3 |
Rear fog lamp not working |1.3.2b| | 3 |
Offside Front Obligatory mirror missing |8.1.1| | 3 |
Nearside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Nearside Rear Fluid suspension has no suspension movement |2.4.D.5| | 3 |
Windscreen washer not working | 3 |
Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b)) | 3 |
Offside Rear fog lamp not working (4.5.1 (a) (ii)) | 3 |
Nearside Front Fluid suspension has no suspension movement |2.4.D.5| | 3 |
Fluid suspension has no suspension movement |2.4.D.5| | 3 |
Offside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
Offside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Exhaust emissions carbon monoxide content excessive |8.2.1.2 |b|| | 3 |
Windscreen wiper blade insecure | 3 |
Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Offside Rear Lower Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 3 |
Offside Headlamp not working on main beam |1.7.5a| | 3 |
Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Driver`s seat insecure |6.2.A.1| | 3 |
Nearside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 3 |
Offside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 3 |
Nearside Steering rack gaiter split |2.2.D.2d| | 3 |
Nearside Front Upper Suspension arm has excessive play in a ball joint |2.4.G.2| | 3 |
Offside Front Side repeater insecure |1.4.A.2b| | 3 |
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 3 |
Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 3 |
Nearside Front Body has a sharp edge caused by damage |6.1.C.1| | 3 |
Offside Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 3 |
Front Exhaust system not adequately supported |7.1.1| | 3 |
Nearside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 3 |
Rear Suspension has inadequate clearance with the bump stop |2.4.A.1a| | 3 |
Fuel system component leaking |7.2.3| | 3 |