| Most common failures | No# failures |
|---|
| Parking brake: efficiency below requirements |3.7.B.7| | 6 |
| Brakes imbalanced across an axle | 5 |
| Nearside Stop lamp not working |1.2.1b| | 4 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 3 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 3 |
| Registration plate lamp issues | 3 |
| Front brake application uneven | 3 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Offside Stop lamp not working |1.2.1b| | 3 |
| Service brake: efficiency below requirements |3.7.B.7| | 3 |
| Offside Headlamp not working on main beam |1.7.5a| | 2 |
| Brake pipe excessively corroded | 2 |
| Front Windscreen wiper not operating automatically when switched on |8.2.1b| | 2 |
| Offside Front Headlamp not working on dipped beam |1.7.5a| | 2 |
| Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 2 |
| Headlamp aim out of alignment | 2 |
| Direction indicators not working |1.4.A.2c| | 2 |
| Nearside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
| Offside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
| Centre Exhaust system not adequately supported |7.1.1| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Outer Front Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
| Nearside Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Front Headlamp not working on main beam |1.7.5a| | 1 |
| Parking brake lever has no reserve travel |3.1.6b| | 1 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Nearside Front Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
| Nearside Front Brake hose twisted |3.6.B.4c| | 1 |
| Brake master cylinder leaking hydraulic fluid |3.6.G.1f| | 1 |
| Braking system leaking |3.6.A.1| | 1 |
| Brake hose excessively deteriorated | 1 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Service brake is causing the vehicle to swerve to the nearside |3.7.C.2| | 1 |
| Nearside Front Lower Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Offside Front Lower Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
| Offside Service brake application uneven across the axle |3.7.D.2b| | 1 |
| Offside Front Obligatory mirror insecure |8.1.1| | 1 |
| Rear parking brake recording little or no effort | 1 |
| Nearside Headlamp not working on main beam |1.7.5a| | 1 |
| Offside Front Drag link end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Nearside Front Suspension arm locating pin retaining device missing |2.4.G.3b| | 1 |
| Parking brake: efficiency below requirements |3.7.D.4| | 1 |
| Offside Front front brake binding |3.7.B.1| | 1 |
| Rear Brake linkage locking device missing |3.5.1l| | 1 |
| Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Rear Stop lamp not working |1.2.1b| | 1 |
| Stop lamp not working |1.2.1b| | 1 |
| Rear brake binding | 1 |
| Nearside Front front brake binding |3.7.B.1| | 1 |
| Offside Inner Front Driver`s seat insecure |6.2.A.1| | 1 |
| Nearside Front Direction indicators not working |1.4.A.2c| | 1 |
| Offside Front Direction indicators not working |1.4.A.2c| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Fuel tank leaking |7.2.3| | 1 |
| Fuel tank insecure |7.2.1| | 1 |
| Track rod end ball joint dust cover missing |2.2.C.1c| | 1 |
| Parking brake lever releases when knocked |3.1.6a| | 1 |
| Nearside Front Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
| Nearside Front Shock absorber insecure |2.7.2b| | 1 |
| Brake pedal spongy |3.3.B.1b| | 1 |
| Horn not working |1.6.2a| | 1 |
| Nearside Rear Stop lamp excessively damaged so that it is not visible from a reasonable distance |1.2.1d| | 1 |
| Nearside Rear Stop lamp not working |1.2.1b| | 1 |
| Offside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
| Battery insecure |1.9.1| | 1 |
| Nearside Inner Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Offside Inner Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Offside Outer Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Offside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
| Offside Leaf spring saddle is moving relative to the spring |2.4.B.7a| | 1 |