Most common failures | No# failures |
---|
Parking brake: efficiency below requirements |3.7.B.7| | 20 |
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 14 |
Service brake: efficiency below requirements |3.7.B.7| | 13 |
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 13 |
Windscreen wiper does not clear the windscreen effectively | 11 |
Headlamp aim out of alignment | 11 |
Registration plate lamp issues | 10 |
Rear brake binding | 7 |
Rear parking brake recording little or no effort | 7 |
Nearside front brake binding |3.7.B.1| | 6 |
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
Horn not working |1.6.2a| | 6 |
Brakes imbalanced across an axle | 6 |
Brake hose excessively deteriorated | 6 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 5 |
Offside front brake binding |3.7.B.1| | 5 |
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
Brake pedal anti-slip provision missing |3.3.A.1b| | 5 |
Rear brake application uneven | 5 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 5 |
Offside Rear rear brake recording little or no effort |3.7.B.5a| | 4 |
Parking brake: efficiency below requirements |3.7.C.1b| | 4 |
Offside Side repeater not working |1.4.A.2c| | 4 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 4 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 4 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
Offside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 4 |
Rear Mechanical brake component has restricted free movement | 4 |
Offside rear brake recording little or no effort |3.7.B.5a| | 4 |
Nearside Side repeater not working |1.4.A.2c| | 3 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Nearside Headlamp not working on main beam |1.7.5a| | 3 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
Offside Headlamp not working on main beam |1.7.5a| | 3 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
Nearside Stop lamp not working |1.2.1b| | 3 |
Offside Stop lamp not working |1.2.1b| | 3 |
Direction indicators flashing less than 60 times a minute |1.4.A.2g| | 3 |
Offside Front Front wheel bearing has excessive play |2.5.A.3c| | 3 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
Centre Exhaust system not adequately supported |7.1.1| | 2 |
Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 2 |
Nearside Drag link end ball joint has excessive play |2.2.B.1f| | 2 |
Nearside Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Front position lamp|s| not working |1.1.A.3b| | 2 |
Offside Headlamp not working on dipped beam |1.7.5a| | 2 |
Nearside Front Direction indicator not working |1.4.A.2c| | 2 |
Offside Direction indicators flashing less than 60 times a minute |1.4.A.2g| | 2 |
Rear Exhaust system not adequately supported |7.1.1| | 2 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 2 |
Brake hose damaged | 2 |
Front Exhaust system not adequately supported |7.1.1| | 2 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Mechanical brake component has restricted free movement | 2 |
Offside Steering rack gaiter split |2.2.D.2d| | 2 |
Offside Front Sub-frame attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 2 |
Nearside Front wheel bearing has excessive play |2.5.A.3c| | 2 |
Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 2 |
Offside Rear Sub-frame corroded and seriously weakened |2.4.G.1| | 2 |
Nearside Front Steering system has excessive free play detected at the steering wheel |steering rack fitted| |2.2.A.1b| | 1 |
Offside Lower Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front Direction indicator not working |1.4.A.2c| | 1 |
Nearside Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Offside Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Offside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Service brake: efficiency below requirements |3.7.C.1a| | 1 |
Nearside Rear Brake performance not tested |3.7.A.1| | 1 |
Offside Rear Brake performance not tested |3.7.A.1| | 1 |
Front Fuel system component leaking |7.2.3| | 1 |
Offside Front Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Offside Brake relay lever excessively worn and seriously weakened |3.5.1e| | 1 |
Nearside Brake relay lever excessively worn and seriously weakened |3.5.1e| | 1 |
Nearside Brake cable has wires broken and is significantly weakened |3.5.1b| | 1 |
Nearside Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Nearside Front drive shaft coupling flexible rubber or fabric coupling softened by oil contamination |2.5.C.1e| | 1 |
Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Fuel system component leaking |7.2.3| | 1 |
Nearside Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Nearside Front Subframe mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Offside Front brake disc has restricted free movement |3.5.1j| | 1 |
Centre Brake pipe fouled by moving parts |3.6.B.2a| | 1 |
Nearside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Offside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Offside Rear Anti-roll bar missing |2.4.G.1| | 1 |
Nearside Front Front drive shaft coupling flexible rubber or fabric coupling unit breaking up |2.5.C.1d| | 1 |
Nearside Rear Brake pipe fouled by moving parts |3.6.B.2a| | 1 |
Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
rear brakes release unevenly |3.7.B.4| | 1 |
Nearside Rear Brake cable has wires broken and is significantly weakened |3.5.1b| | 1 |
Fuel pipe leaking |7.2.3| | 1 |
Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
All position lamps adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Offside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Nearside Steering rack gaiter split |2.2.D.2d| | 1 |
Nearside Rear Sub-frame corroded and seriously weakened |2.4.G.1| | 1 |
Offside Rear Sub-frame corroded and seriously weakened in wheel arch |2.4.G.1| | 1 |
Nearside Front Subframe mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 1 |
Nearside Front brake caliper has restricted free movement |3.5.1k| | 1 |
Offside Front brake caliper has restricted free movement |3.5.1k| | 1 |
Nearside Steering rack gaiter insecure |2.2.D.2d| | 1 |
Brake performance not tested |3.7.A.1| | 1 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear Lower Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Seat belt anchorage prescribed area is fractured |5.2.6| | 1 |
Nearside Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 1 |
Offside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Rear Stop lamp not working |1.2.1b| | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Rear Exhaust mounting missing |7.1.1b| | 1 |
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 1 |
Offside Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 1 |
Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Offside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Nearside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
Offside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
Nearside Direction indicators flashing less than 60 times a minute |1.4.A.2g| | 1 |
Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Offside Front Upper Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Rear Subframe mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
Offside Rear An item not tested |Manual| | 1 |
Offside Rear Suspension arm attachment bracket/mounting insecure |2.4.G.1| | 1 |
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Outer Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Outer Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Registration plate issues | 1 |
Rear Fuel hose leaking |7.2.3| | 1 |
Nearside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Offside Front Service brake excessively binding (1.2.1 (f)) | 1 |
Offside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
Nearside Front Sub-frame attachment rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Nearside Outer Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
Headlamp not working on dipped beam |1.7.5a| | 1 |
Driver`s seat insecure |6.2.A.1| | 1 |
Front passenger seat insecure |6.2.3| | 1 |
Nearside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Rear Sub-frame corroded and seriously weakened |2.4.G.1| | 1 |
Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Offside Rear Trailing arm attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 1 |
Offside Front constant velocity joint is insecure |2.5.C.1b| | 1 |
Rear Fluid suspension leaking |2.4.D.2| | 1 |
Offside Rear Rear wheel bearing rough when rotated |2.6.1| | 1 |
Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Steering arm has relative movement at its fixings |2.2.B.1h| | 1 |
Nearside Sub-frame rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 1 |
Offside Rear Subframe mounting prescribed area is excessively corroded floor |2.4.A.3| | 1 |
Nearside Rear Fluid suspension unit displaced |2.4.D.1a| | 1 |
Nearside Front Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
Offside Rear Sub-frame attachment bracket/mounting weld cracked plate on floor not welded all the way around |2.4.G.1| | 1 |
Nearside Stop lamp|s| all not working |4.3.1 |a| |iii|| | 1 |
Offside Stop lamp|s| all not working |4.3.1 |a| |iii|| | 1 |
Offside Rear Sub-frame attachment rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Front Upper Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Offside Front Steering rack gaiter split |2.2.D.2d| | 1 |
Nearside Front Front constant velocity joint is insecure |2.5.C.1b| | 1 |
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Exhaust has a major leak of exhaust gases loose at manifold |7.1.2| | 1 |
Rear Fuel system component leaking pump area |7.2.3| | 1 |