| Most common failures | No# failures |
|---|
| Registration plate issues | 11 |
| Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h)) | 8 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a)) | 7 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b)) | 7 |
| Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b)) | 4 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c)) | 4 |
| Exhaust carbon monoxide content at idle exceeds manufacturers specified limits (8.2.1.2 (b)) | 4 |
| Windscreen washer not working | 3 |
| Exhaust catalytic converter missing where one was fitted as standard (8.2.1.1 (a)) | 2 |
| Emissions unable to be completed (8.2.1.2 (d)) | 2 |
| Headlamp aim out of alignment | 2 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 2 |
| Windscreen wiper does not clear the windscreen effectively | 2 |
| Electronic stability control warning lamp indicates a fault (7.12 (e)) | 1 |
| Supplementary restraint system warning lamp indicates a fault (7.1.6 (a)) | 1 |
| Offside Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a)) | 1 |
| Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt outer cv boot (6.1.7 (g) (ii)) | 1 |
| Offside Rear Shock absorbers has a serious fluid leak | 1 |
| Nearside Rear Road wheel fractured Crack on inner bead (5.2.2 (a)) | 1 |
| Offside Rear Exhaust system insecure mounting snapped (6.1.2 (a)) | 1 |
| Front Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h)) | 1 |
| Drive shaft securing bolt missing (6.1.7 (a) (i)) | 1 |
| Brake performance unable to be tested (1.2.1 (g)) | 1 |
| Windscreen damaged and affecting the drivers view of the road (3.2 (a) (ii)) | 1 |
| Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b)) | 1 |
| Exhaust emissions exceed manufacturers specified limit c/o 1.446 limit is 0.200
lambda 1.101 limit is between 1.030 to 0.970 (8.2.2.2 (a)) | 1 |
| Nearside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Nearside Front Road wheel has a welding defect (5.2.2 (a)) | 1 |
| Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a)) | 1 |
| Nearside Rear Shock absorbers has a serious fluid leak | 1 |
| Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Nearside Front Road wheel badly distorted (5.2.2 (c) (i)) | 1 |
| Anti-lock braking system warning lamp indicates an ABS fault | 1 |
| Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Emission control equipment obviously defective (8.2.1.1 (a)) | 1 |
| Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Nearside Front Suspension arm pin or bush excessively worn bent arm bush is torn. (5.3.4 (a) (i)) | 1 |
| Offside Rear Road wheel has a welding defect (5.2.2 (a)) | 1 |
| Offside Side repeater not working (4.4.1 (a) (ii)) | 1 |
| Offside Front Hydraulic brake cylinder leaking hydraulic fluid caliper (1.1.16 (b) (i)) | 1 |