Most common failures | No# failures |
---|
Headlamp aim out of alignment | 13 |
Rear reflector on motorcycle missing |1.4.1| | 12 |
Horn not working |1.7.3a| | 6 |
Drive chain excessively loose |6.2.1d| | 5 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 5 |
Headlamp aim beam image kick up to the offside |1.6| | 4 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Drive chain worn to excess |6.2.1e| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Headlamp insecure |1.2.3b| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Front Drive chain sprocket worn to excess |6.2.1e| | 2 |
Rear reflector missing |4.8.2 |a| |ii|| | 2 |
Front Direction indicator missing |1.5.1a| | 2 |
Rear Direction indicator missing |1.5.1a| | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear An item not tested |Manual| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Front Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Front brake disc in such a condition that it is seriously weakened | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Rear Suspension attachment bracket/mounting insecure (5.3.3 (a) (i)) | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Brake lever is inoperative |3.1.3c| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Direction indicator missing |1.5.1a| | 1 |
Front Wheel spoke excessively loose |4.2.1b| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Footrest missing |6.2.1a| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Front An item not tested |Manual| | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Horn is not a constant note |1.7.3c| | 1 |
Front Brake lever mounting cracked |3.1.2c| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Fuel cap sealing washer torn |7.2.2c| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Headlamp insecure |4.1.1 |c|| | 1 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Horn control defective |1.7.2a| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Registration plate issues | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Rear Rear wheel bearings are excessively tight |2.4.A.2c| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Fork yoke deformed |2.1.1b| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Nearside Rear Wheel spindle locking device missing (5.2.1 (d)) | 1 |
Nearside Rear Suspension arm attachment bracket/mounting insecure Swing arm bolts loose and no lock nuts (5.3.3 (a) (i)) | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Front Horn sound not in accordance with requirements constant (7.7 (c)) | 1 |
Offside Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Central Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |