Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 47 |
Headlamp aim out of alignment | 25 |
Horn not working |1.7.3a| | 23 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 16 |
Drive chain excessively loose |6.2.1d| | 15 |
Registration plate issues | 14 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 13 |
Headlamp insecure |1.2.3b| | 12 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 12 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 10 |
Drive chain worn to excess |6.2.1e| | 9 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 8 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 7 |
Rear reflector missing |4.8.2 |a| |ii|| | 6 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 6 |
Headlamp aim beam image kick up to the offside |1.6| | 6 |
Rear Rear reflector on motorcycle missing |1.4.1| | 5 |
Offside Rear Direction indicators not working |1.5.1c| | 5 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 4 |
Rear reflector missing (4.8.2 (a) (ii)) | 4 |
Offside Rear Direction indicator not working |1.5.1c| | 4 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 4 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Steering headbearing has excessive free play |2.2.2| | 4 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
Direction indicators not working |1.5.1c| | 4 |
Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Front wheel bearings have excessive free play |2.3.5b| | 4 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 4 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 3 |
Brake pedal pivots excessively worn |3.1.3a| | 3 |
Fuel cap sealing washer missing |7.2.2c| | 3 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Nearside Rear Direction indicator not working |1.5.1c| | 3 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear Brake cylinder leaking hydraulic fluid |3.2.B1e| | 2 |
Rear position lamp insecure |1.1.1c| | 2 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Handlebar deformed |2.1.1b| | 2 |
Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Riders seat insecure |6.2.1a| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 2 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Rear wheel rotation likely to be impeded |6.2.1b| | 2 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
Indicator switch insecure |1.5.4| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Rear position lamp obscured more than 50% |1.1.1d| | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride c clip with open end towards direction of rotation |6.2.1h| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Front Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Rear Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Brake caliper insecure (1.1.16 (c) (i)) | 1 |
Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
Rear Drive chain sprocket so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
Front Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Stop lamp does not illuminate immediately a brake applies rear brake |1.3.1a| | 1 |
Front Brake lever pivots excessively worn |3.1.3a| | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Headlamp aim not tested |1.6| | 1 |
Direction indicators not working no indicators fitted |1.5.1c| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
Rear wheel bearings have excessive free play (2.4.A.2c) | 1 |
Rear Drive chain worn to excess (6.2.1e) | 1 |
Rear Rear shock absorber has inadequate damping effect. (2.4.A.3b) | 1 |
Front Brake lever is so short and the brake cannot be readily applied (3.1.3c) | 1 |
Horn not loud enough to be heard by another road user (1.7.3a) | 1 |
Direction indicators affected by the operation of another lamp (1.5.1c) | 1 |
Rear reflector on motorcycle missing (1.4.1) | 1 |
Front Direction indicator missing |1.5.1a| | 1 |
Rear Direction indicator missing |1.5.1a| | 1 |
Rear Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Horn missing |1.7.1| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
An item not tested |Manual| | 1 |
Front Wheel spoke excessively loose |4.2.1b| | 1 |
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Direction indicator flashing more than 120 times per minute all |1.5.1c| | 1 |
Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Stop lamp does not illuminate immediately a brake applies front lever |1.3.1a| | 1 |
Front Brake lever insecure |3.1.2a| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride rear sprocket bolts loose and 1 missing |6.2.1h| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
Rear Brake cylinder leaking (1.1.16 (b) (i)) | 1 |
Registration plate lamp issues | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Horn not working new horn fitted (7.7 (a) (ii)) | 1 |
Rear reflector on motorcycle obscured |1.4.1| | 1 |
Nearside Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear suspension component loose mono shock linkage |2.4.A.1a| | 1 |
Rear Footrest missing |6.2.12 |a|| | 1 |
Clutch lever shortened so it cannot be readily operated |6.2.7 |b|| | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Horn sound not in accordance with requirements |7.7 |c|| | 1 |
Nearside Front Direction indicator light intensity significantly reduced |4.4.3 |a|| | 1 |
Rear Wheel hub excessively worn |5.2.1 |b| |i|| | 1 |
Brake lever has inadequate reserve travel adjustment screw fouling throttle |3.1.3b| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Upper Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear suspension bearing has excessive free play swingarm |2.4.A2a|i|| | 1 |
Rear Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Rear Brake cylinder leaking and braking performance affected |1.1.16 |b| |ii|| | 1 |
Headlamp aim not tested Insecure |4.1.2 |b|| | 1 |
Rear position lamp adversely affected by the operation of the horn |1.1.3b| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Rear Upper Motorcycle structure cracked pillion foot rest |6.1.1a| | 1 |
Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Offside Rear All direction indicators missing |4.4.1 |a| |ii|| | 1 |
Nearside Rear All direction indicators missing |4.4.1 |a| |ii|| | 1 |
Front Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii|| | 1 |
Rear Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii|| | 1 |
Rear Shock absorber has an excessively worn bush |5.3.2 |c|| | 1 |
Nearside Rear Footrest missing |6.2.12 |a|| | 1 |
Offside Rear Footrest missing |6.2.12 |a|| | 1 |
Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
Riders seat insecure |6.2.5 |a| |ii|| | 1 |
Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
Rear Chain guard insecure |6.2.1c| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Offside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Front Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
Headlamp switch insecure |1.2.4| | 1 |
Rear Brake hose leaking (1.1.12 (c)) | 1 |
Nearside Front Footrest insecure (6.2.12 (a)) | 1 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Brake performance not tested (1.2.1 (g)) | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Front mudguard insecure |2.3.7| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Steering lock stop ineffective |2.1.3| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Rear Wheel spoke missing |4.2.1b| | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Rear Stop lamp insecure |1.3.3b| | 1 |
Rear Rear position lamp insecure |1.1.1c| | 1 |
Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Front Headlamp insecure (4.1.1 (c)) | 1 |
Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
Rear suspension bearing has excessive free play Swing arm |2.4.A2a|i|| | 1 |