Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 13 |
Headlamp aim out of alignment | 9 |
Headlamp insecure |1.2.3b| | 6 |
Horn not working |1.7.3a| | 5 |
Drive chain worn to excess |6.2.1e| | 5 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 5 |
Drive chain excessively loose |6.2.1d| | 4 |
Registration plate issues | 3 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Offside Rear Direction indicator not working |1.5.1c| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear Footrest missing |6.2.1a| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Rear Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Front wheel spindle securing nut locking device insecure |2.3.3a| | 1 |
Rear suspension bush has excessive free play swingarm bushes have excessive lateral movement |2.4.A2a|i|| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
Rear Rear suspension component excessively bent |2.4.A.1a| | 1 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Front Stop lamp does not emit a steady light |1.3.1b| | 1 |
Offside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Brake lever pivots excessively worn |3.1.3a| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Front Headlamp damaged and function impaired |1.2.3a| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Rear wheel spindle loose |2.4.A.2b| | 1 |
Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Steering lock stop ineffective |2.1.3| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
An item not tested |Manual| | 1 |
Fork yoke deformed |2.1.1b| | 1 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Front Brake lever insecure |3.1.2a| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Wheel spoke excessively loose |4.2.1b| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Upper Headlamp insecure |1.2.3b| | 1 |
Offside Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Offside Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |