Most common failures | No# failures |
---|
Registration plate issues | 19 |
Rear reflector on motorcycle missing |1.4.1| | 10 |
Headlamp aim out of alignment | 10 |
Exhaust is leaking and excessively noisey |7.1.1b| | 9 |
Horn not working |1.7.3a| | 9 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Steering headbearing has excessive free play |2.2.2| | 5 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Rear reflector missing |4.8.2 |a| |ii|| | 4 |
Registration plate lamp issues | 4 |
Fuel cap sealing washer missing |7.2.2c| | 4 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Front wheel bearings have excessive free play |2.3.5b| | 3 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
Rear reflector on motorcycle obscured |1.4.2b| | 3 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 2 |
Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Direction indicator not working all not flashing |1.5.1c| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Nearside Front Direction indicators not working |1.5.1c| | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 2 |
Horn not working |7.7 |a| |ii|| | 2 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Stop lamp remains on when the brakes are released | 2 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
Rear position lamp incorrect colour |1.1.2b| | 1 |
Exhaust has part of the system missing |7.1.1a| | 1 |
Indicator switch defective |1.5.4| | 1 |
Stop lamp not working with front brake lever (4.3.1 (a) (ii)) | 1 |
All direction indicators light intensity significantly reduced all (4.4.3 (a)) | 1 |
Fuel cap ineffective seal missing (6.1.3 (b) (i)) | 1 |
Headlamp insecure (4.1.1 (c)) | 1 |
Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
Stop lamp not working front brake light switch (4.3.1 (a) (ii)) | 1 |
Rear Valve stem seriously misaligned not seated in rim correctly
(deflated and valve dropped beyond rim edge) (5.2.3 (j)) | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Offside Front Handlebar mounting clamp loose |2.1.1a| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Stop lamp adversely affected by the operation of another lamp When brake applied dip beam lights up (4.3.3 (b)) | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Exhaust system insecure |6.1.2 |a|| | 1 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Offside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Front shock absorber seal failed and leaking oil nearside |2.3.3| | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected Lose on handle bars (6.2.7 (a) (ii)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Nearside Rear Direction indicator lens defective such that the emitted light is adversely affected (4.4.1 (b) (ii)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Stop lamp does not illuminate immediately a brake applies From front control |1.3.1a| | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Headlamp incorrect colour |1.2.1| | 1 |
Rear Engine mounting/bracket excessively loose |6.1.8 |a| |ii|| | 1 |
Rear Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Fuel pipe leaking At carburettor (6.1.3 (b) (i)) | 1 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Rear Rear reflector on motorcycle obscured |1.4.1| | 1 |
Centre Rear Upper Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Centre Rear Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Front Upper Stop lamp does not illuminate immediately a brake applies front brake switch |1.3.1a| | 1 |
Front Brake disc contaminated with oil (1.1.14 (b)) | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Stop lamp does not illuminate immediately a brake applies both |1.3.1a| | 1 |
Front Stop lamp does not illuminate immediately a brake applies Front operated |1.3.1a| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies Rear operated |1.3.1a| | 1 |
Shock absorber has negligible damping effect rear suspension not damping, too soft (5.3.2 (b)) | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Rear Stop lamp not working brake light switch |4.3.1 |a| |ii|| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Headlamp insecure |4.1.1 |c|| | 1 |
Nearside Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Offside Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Headlamp incorrect colour blue tint on headlamp, removed (4.1.4 (a)) | 1 |
Centre Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Nearside Stop lamp does not illuminate immediately a brake applies lever |1.3.1a| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil (2.3.3) | 1 |
Central Rear Fuel hose leaking excessively or a risk of fire |6.1.3 |b| |ii|| | 1 |
Rear Rear position lamp incorrect colour |1.1.2b| | 1 |
Throttle operating incorrectly Throttle cable incorrectly adjusted causing over revving at idle (6.2.7 (a) (i)) | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Central Front Horn not working |7.7 |a| |ii|| | 1 |
Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Rear Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Central Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Riders seat insecure |6.2.1a| | 1 |
Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Nearside Front Brake component modification adversely affecting braking performance |1.1.21 |d| |ii|| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Rear Stop lamp missing |1.3.3a| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front All position lamps do not illuminate immediately when switched on side |1.1.3a| | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Centre Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Nearside Front Upper Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Offside Front Upper Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Nearside Rear Upper Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Offside Rear Upper Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Central Front Lower Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Central Rear Upper Stop lamp affected by the operation of the horn |1.3.2| | 1 |
Nearside Front Lower Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Stop lamp does not emit a steady light front lever |1.3.1b| | 1 |
Nearside Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition blowing at front (8.1.1 (a)) | 1 |
Rear position lamp adversely affected by the operation of another lamp Headlamp dipped beam |1.1.3b| | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Offside Front Brake lever insecure (1.1.2 (e) (i)) | 1 |
Rear Wheel fixing loose (single fixing) (5.2.1 (a) (ii)) | 1 |
Nearside Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Offside Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Stop lamp does not illuminate immediately a brake applies front brake control |1.3.1a| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Offside Front Upper Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Brake disc contaminated (1.1.14 (b)) | 1 |
Nearside Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Front Headlamp insecure (4.1.1 (c)) | 1 |
Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Headlamp reflector missing (4.1.1 (b) (ii)) | 1 |