Most common failures | No# failures |
---|
Headlamp aim out of alignment | 69 |
Rear reflector on motorcycle missing |1.4.1| | 34 |
Steering headbearing has excessive free play |2.2.2| | 28 |
Headlamp insecure |1.2.3b| | 18 |
Exhaust is leaking and excessively noisey |7.1.1b| | 18 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 17 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 16 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 15 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 14 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 13 |
Fuel cap sealing washer missing |7.2.2c| | 12 |
Registration plate issues | 10 |
Front shock absorber seal failed and leaking oil |2.3.3| | 9 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 8 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 7 |
Rear Rear reflector on motorcycle missing |1.4.1| | 7 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 7 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 6 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 6 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Horn not working |1.7.3a| | 5 |
Indicator tell tale not functioning |1.5.2| | 5 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 4 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 4 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 4 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 4 |
Throttle operating incorrectly |6.2.1f| | 4 |
Nearside Rear Direction indicator not working |1.5.1c| | 4 |
Nearside Rear Direction indicator insecure |1.5.3b| | 4 |
Rear reflector on motorcycle obscured |1.4.1| | 4 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 4 |
Front Steering headbearing has excessive free play |2.2.2| | 4 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 4 |
Front wheel bearings have excessive free play |2.3.5b| | 3 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 3 |
Headlamp aim not tested |1.6| | 3 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Offside Rear Direction indicator not working |1.5.1c| | 3 |
Direction indicators not working |1.5.1c| | 3 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 3 |
Nearside Front Direction indicator not working |1.5.1c| | 3 |
Offside Front Direction indicator not working |1.5.1c| | 3 |
Rear Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 3 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 3 |
Nearside Rear Direction indicators not working |1.5.1c| | 3 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
Front suspension has inadequate damping effect. |2.3.6c| | 3 |
Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
Riders seat insecure |6.2.1a| | 3 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 2 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Front position lamp incorrect colour |1.1.2a| | 2 |
Front Brake performance not tested |3.3| | 2 |
Upper Steering headbearing has excessive free play |2.2.2| | 2 |
Rear Brake caliper|s| insecure |3.2.A1j| | 2 |
Stop lamp emits other than a steady red light |1.3.1b| | 2 |
Offside Rear Direction indicator insecure |1.5.3b| | 2 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Offside Rear Direction indicators not working |1.5.1c| | 2 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 2 |
Fairings insecure and likely to impede the steering |2.1.2e| | 2 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 2 |
Rear Rear reflector on motorcycle obscured |1.4.1| | 2 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 2 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Front Hydraulic brake control feels spongy |3.1.4a| | 2 |
Nearside Rear Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 2 |
Front Brake disc|s| excessively scored |3.2.A1l| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Front Motorcycle structure excessively damaged |6.1.1a| | 2 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 2 |
Fuel hose leaking |7.2.1a| | 2 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
Centre Rear reflector on motorcycle missing |1.4.1| | 2 |
Rear suspension bearing excessively deteriorated |2.4A.2a|i|| | 2 |
Offside Direction indicator not working |1.5.1c| | 2 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 2 |
Brake locking device missing |3.2.A1e| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Headlamp damaged and function impaired |1.2.3a| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Registration plate lamp issues | 2 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Front Brake disc|s| excessively pitted |3.2.A1l| | 2 |
Front Headlamp insecure |1.2.3b| | 2 |
Nearside Front Direction indicators not working |1.5.1c| | 2 |
Front Direction indicators not working |1.5.1c| | 2 |
Nearside Front Direction indicator deteriorated and function impaired |1.5.3a| | 2 |
Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Steering movement excessively rough with the weight on the lower bearing |2.2.1a| | 1 |
Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear Brake performance not tested |3.3| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Nearside Front Upper Direction indicator incorrect colour |1.5.1b| | 1 |
Lower Steering headbearing has excessive free play |2.2.2| | 1 |
Nearside Brake lever insecure |3.1.2a| | 1 |
Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Lower Motorcycle structure cracked |6.1.1a| | 1 |
Front Front position lamp insecure |1.1.1c| | 1 |
Rear position lamp incorrect colour |1.1.2b| | 1 |
Rear Brake pipe excessively damaged |3.2.B2a| | 1 |
Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Nearside Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Offside Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Rear Brake locking device insecure |3.2.A1e| | 1 |
An item not tested |Manual| | 1 |
Rear Brake lever insecure |3.1.2a| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Centre Riders seat insecure |6.2.1a| | 1 |
Front Upper Front position lamp missing |1.1.1a| | 1 |
Front Brake pipe union leaking fluid |3.2.B4| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Nearside Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Front Brake hose excessively kinked |3.2.B3a| | 1 |
Front Upper Fairing insecure and likely to impede the steering |2.1.2e| | 1 |
Front Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
Front Horn not working |1.7.3a| | 1 |
Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Offside Rear suspension component cracked |2.4.A.1a| | 1 |
Offside Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Nearside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Rear Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
Front Front mudguard can easily contact the wheel |2.3.7| | 1 |
Leg shield insecure and likely to impede the steering |2.1.2e| | 1 |
Brake hose damaged | 1 |
Rear Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Nearside Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Nearside Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Offside Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front mudguard insecure |2.3.7| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Front Brake caliper|s| insecure |3.2.A1j| | 1 |
Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Front Brake hose stretched by steering movement |3.2.B3b| | 1 |
Centre Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Offside Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Motorcycle structure excessively distorted |6.1.1a| | 1 |
Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Front Front wheel spindle securing nut locking device insecure |2.3.5a| | 1 |
Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Rear Brake lever cannot be released smoothly |3.1.3d| | 1 |
Rear suspension has a modification which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Headlamp deteriorated and function impaired |1.2.3a| | 1 |
Indicator switch defective |1.5.4| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Stop lamp does not emit a steady light |1.3.1b| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Offside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Offside Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Front position lamp deteriorated and function impaired |1.1.1b| | 1 |
Front Brake lever attachment screws loose |3.1.2b| | 1 |
Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Nearside Front Lower Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Nearside Front Upper Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Upper Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Rear Wheel fixing loose (multiple fixings) (5.2.1 (a) (i)) | 1 |
Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Fuel cap ineffective (6.1.3 (b) (i)) | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Rear Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Offside Rear Footrest missing (6.2.12 (a)) | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Indicator switch insecure |1.5.4| | 1 |
Front suspension assembly has excessive free play in the pivot bearings. |2.3.2| | 1 |
Nearside Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Headlamp aim not tested |1.6| | 1 |
Front Brake lever excessively damaged |3.2.A1c| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Inner Fuel cap sealing washer missing |7.2.2c| | 1 |
Nearside Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Inner Front Lower Front position lamp insecure |1.1.1c| | 1 |
Inner Front Upper Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Inner Rear Lower Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Inner Rear Lower Rear reflector on motorcycle missing |1.4.1| | 1 |
Offside Rear Lower Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Nearside Front Lower Brake pipe inadequately supported |3.2.B2b| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Rear Rear wheel insecure |4.2.3b| | 1 |
Nearside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Stop lamp damaged and function impaired |1.3.3a| | 1 |
Rear Motorcycle structure excessively damaged |6.1.1a| | 1 |
Exhaust has part of the system missing |7.1.1a| | 1 |
Rear wheel insecure |4.2.3b| | 1 |
Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 1 |
Floor brake test indicates a severely juddering brake |3.3C2d.| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Headlamp main beam flickers when tapped lightly by hand |1.2.2c| | 1 |
Headlamp dipped beam flickers when tapped lightly by hand |1.2.2c| | 1 |
Rear Brake component defective due to a deliberate modification which significantly reduces the original strength |3.1.5| | 1 |
Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Rear suspension component misaligned |2.4.A.1a| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Nearside Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front shock absorber seal failed and leaking oil both front |2.3.3| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts insecure due to missing front mudguard |3.2.B2c| | 1 |
Front Front position lamp does not face the front |1.1.1d| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Nearside Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Position lamp switch insecure |1.1.4b| | 1 |
Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Rear reflector on motorcycle obscured |1.4.2b| | 1 |
Nearside Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Rear Rear reflector on motorcycle obscured |1.4.2b| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Nearside Lower Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Front Direction indicator damaged and function impaired |1.5.3a| | 1 |