| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 36 |
| Registration plate issues | 23 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 14 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 12 |
| Registration plate lamp issues | 12 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 10 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 10 |
| Steering headbearing has excessive free play |2.2.2| | 9 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 7 |
| Rear reflector on motorcycle missing |1.4.1| | 7 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Riders seat insecure |6.2.1a| | 5 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 4 |
| Front Brake excessively binding |1.2.1 |f|| | 4 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 4 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
| Front Shock absorber has negligible damping effect (5.3.2 (b)) | 4 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 3 |
| Front Brake excessively binding (1.2.1 (f)) | 3 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 3 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 3 |
| Headlamp switch faulty |1.2.4| | 3 |
| Fuel cap sealing washer missing |7.2.2c| | 3 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 3 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 3 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
| Nearside Front Direction indicator not working |1.5.1c| | 3 |
| Direction indicators not working |1.5.1c| | 2 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 2 |
| Front Steering headbearing has excessive free play |2.2.2| | 2 |
| Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 2 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
| Rear Brake lever insecure |3.1.2a| | 2 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 2 |
| Stop lamp remains on when the brakes are released | 2 |
| Throttle operating incorrectly (6.2.7 (a) (i)) | 2 |
| Rear position lamp insecure |1.1.1c| | 2 |
| Rear reflector missing |4.8.2 |a| |ii|| | 2 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 2 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 2 |
| Rear Steering linkage has excessive free play |2.2.2| | 2 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
| Indicator switch inoperative (4.4.2 (a) (ii)) | 2 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Stop lamp emits other than a steady red light |1.3.1b| | 2 |
| Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Nearside Direction indicators not working |1.5.1c| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on Rear number plate light bulb replaced |1.1.3a| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear Shock absorber has an excessively worn bush |5.3.2 |c|| | 1 |
| Rear Engine mounting/bracket damaged or deteriorated resulting in excessive movement |6.1.8 |a| |i|| | 1 |
| Rear Exhaust system insecure |6.1.2 |a|| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Rear Brake lever mounting cracked |3.1.2c| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Front Roller brake test indicates a binding brake (3.3.A1a) | 1 |
| Lower Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Rear suspension bearing excessively deteriorated |2.4A.2a|i|| | 1 |
| Rear reflector on motorcycle obscured |1.4.2b| | 1 |
| Horn not working |1.7.3a| | 1 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Nearside Footrest insecure |6.2.1a| | 1 |
| Central Front Lower Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
| Direction indicator not working ALL |1.5.1c| | 1 |
| Rear Suspension component mounting modified so the suspension is inoperative (5.3.3 (c) (ii)) | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Rear Brake lever attachment screws loose |3.1.2b| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
| Offside Rear Direction indicator insecure |1.5.3b| | 1 |
| An item not tested |Manual| | 1 |
| Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Rear Front mudguard insecure |2.3.7| | 1 |
| Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Exhaust excessively deteriorated exhaust blowing from under heat shield |7.1.1a| | 1 |
| Brake disc|s| friction surface contaminated by oil or grease contaminated by fork oil |3.2.A1k| | 1 |
| Rear reflector on sidecar obscured |1.4.2b| | 1 |
| Engine mounting/bracket damaged or deteriorated resulting in excessive movement excessive play (6.1.8 (a) (i)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Front Position lamp not working |4.2.1 |a|| | 1 |
| Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Stop lamp insecure |1.3.3b| | 1 |
| Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b)) | 1 |
| Engine mounting/bracket damaged or deteriorated resulting in excessive movement |6.1.8 |a| |i|| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Stop lamp showing white light to the rear |4.3.3 |a| |ii|| | 1 |
| Position lamp showing white light to the rear |4.2.3 |a| |ii|| | 1 |
| Offside Handlebar fouling on the fuel tank or bodywork on full lock no stop lock to the off side |2.1.4 |b|| | 1 |
| Suspension component pin or bush excessively worn engine mounting bush |5.3.4 |a| |i|| | 1 |
| Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Offside Brake lever is so short that the brake cannot be readily applied (1.1.2 (d)) | 1 |
| Nearside Rear Stop lamp emits other than a steady red light (4.3.3 (a) (ii)) | 1 |
| Offside Rear Stop lamp adversely affected by the operation of another lamp (4.3.3 (b)) | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Front Stop lamp missing |1.3.3a| | 1 |
| Brake caliper|s| insecure |3.2.A1j| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Exhaust has part of the system missing |7.1.1a| | 1 |
| Indicator switch defective |1.5.4| | 1 |
| Horn not working (7.7 (a)) | 1 |
| Rear Position lamp missing Tail Light not working (4.2.1 (a)) | 1 |
| Front Decelerometer brake test indicates a binding brake |3.3.E1d| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Rear suspension bearing has excessive free play engine mounting bearings at front |2.4.A2a|i|| | 1 |
| Nearside Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Nearside Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Rear Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) | 1 |
| Fuel cap leaking (6.1.3 (b) (i)) | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Nearside Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies front brake switch defective |1.3.1a| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Rear Brake lever so insecure that the brake cannot be readily applied (1.1.2 (e) (ii)) | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Nearside Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
| Rear wheel insecure |4.2.3b| | 1 |
| Front Brake caliper insecurely mounted and braking performance affected |1.1.16 |c| |ii|| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Rear position lamp incorrect colour |1.1.2b| | 1 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Central Fuel hose leaking excessively or a risk of fire (6.1.3 (b) (ii)) | 1 |
| Front position lamp incorrect colour |1.1.2a| | 1 |
| Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
| Offside Front Lower Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Rear Brake lever is inoperative |3.1.3c| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front Decelerometer brake test indicates a sticking brake |3.3.E1d| | 1 |
| Rear Upper Brake lever mounting insecure |3.1.2a| | 1 |
| Centre Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
| Centre Rear Upper Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Front Lower Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
| Rear Position lamp not working |4.2.1 |a|| | 1 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Nearside Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Rear Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
| Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Offside Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Front Exhaust is leaking and excessively noisey silencer joint |7.1.1b| | 1 |