>

MOT History from tests of petrol APRILIA RX50s year 2008

Review the list of common APRILIA RX50 failures below or to perform a specific mot history check on your APRILIA then use our popular KnowYourCar service

mot history
Pass percent:43.48%
(The average a petrol APRILIA RX50 year 2008 passes without issue)
Based on:115 MOT Tests
Most common failuresNo# failures
Rear reflector on motorcycle missing |1.4.1|22
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||10
Horn not working |1.7.3a|8
Headlamp aim out of alignment8
Drive chain excessively loose |6.2.1d|8
Rear wheel bearings have excessive free play |2.4.A.2c|8
Drive chain worn to excess |6.2.1e|6
Headlamp insecure |1.2.3b|5
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||5
Stop lamp does not illuminate immediately a brake applies |1.3.1a|5
Offside Rear Direction indicator not working |1.5.1c|4
Rear Drive chain sprocket worn to excess |6.2.1e|4
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|4
Horn not loud enough to be heard by another road user |1.7.3a|3
Rear Roller brake test indicates a binding brake |3.3.A1a|3
Handlebar deformed |2.1.1b|3
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b|2
Front wheel bearings have excessive free play |2.3.5b|2
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|2
Exhaust is leaking and excessively noisey |7.1.1b|2
Rear suspension bearing has excessive free play |2.4.A2a|i||2
Rear Wheel spoke excessively loose |4.2.1b|2
Rear Brake disc|s| excessively worn |3.2.A1l|2
Drive chain excessively tight |6.2.1d|2
Registration plate issues2
Clutch lever shortened so it cannot be readily operated. |6.2.1g|2
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|2
Direction indicator flashing more than 120 times per minute |1.5.1c|2
Nearside Rear Direction indicators not working |1.5.1c|2
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii||2
Rear Brake excessively binding (1.2.1 (f))2
Exhaust has a major leak of exhaust gases |6.1.2 |a||1
Headlamp not working on dipped beam |4.1.1 |a| |ii||1
Fuel pipe leaking |7.2.1a|1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|1
Rear Brake performance not tested |3.3|1
Brake performance not tested |3.3|1
Front Headlamp aim not tested |1.6|1
An item not tested |Manual|1
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a|1
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Direction indicators not working |1.5.1c|1
Rear Wheel alignment incorrect which adversely affects the steering To LHS |2.5.1|1
Front Front shock absorber seal failed and leaking oil |2.3.3|1
Rear wheel bearings are excessively rough |2.4.A.2c|1
Drive chain fouling another component |6.2.1d|1
Headlamp switch insecure |1.2.4|1
Headlamp switch faulty lamp is dipped when switch set to hi-beam, lamp on hi-beam when switch set to dipped |1.2.4|1
Front Stop lamp emits other than a steady red light |1.3.1b|1
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|1
Horn is not continous or uniform |1.7.3c|1
Nearside Rear Direction indicator insecure |1.5.3b|1
Front Drive chain sprocket worn to excess |6.2.1e|1
Rear Rear wheel bearings have excessive free play |2.4.A.2c|1
Rear Wheel spoke missing |4.2.1b|1
Nearside Front shock absorber seal failed and leaking oil |2.3.3|1
Front Brake lever pivots excessively worn |3.1.3a|1
Rear wheel spindle securing nut locking device missing |2.4.A.2b|1
Rear shock absorber seal failed and leaking oil |2.4.A.1c|1
Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Drive chain sprocket worn to excess |6.2.1e|1
Front wheel bearings are excessively rough |2.3.5b|1
Throttle operating incorrectly |6.2.1f|1
Offside Handlebar handgrip not secure to handlebars. |2.1.1c|1
Rear reflector on motorcycle incorrectly positioned |1.4.2d|1
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2|1
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c|1
Headlamp aim not tested |1.6|1
Nearside Rear Footrest missing |6.2.1a|1
Offside Rear Footrest missing |6.2.1a|1
Rear Wheel has an excessively distorted bead rim. |4.2.2|1
Rear Wheel has an excessively eccentric bead rim. |4.2.2|1
Handlebar handgrip not secure to handlebars. |2.1.1c|1
Front shock absorber seal failed and leaking oil both |2.3.3|1
Brake lever is damaged and the brake cannot be readily applied |3.1.3c|1
Rear Direction indicator not working |1.5.1c|1
Front Direction indicator flashing more than 120 times per minute |1.5.1c|1
Brake pedal is inoperative |3.1.3c|1
Rear Direction indicator missing Both |1.5.1a|1
All position lamps do not illuminate immediately when switched on |1.1.3a|1
Brake lever cannot be applied smoothly fouling another component |3.1.3d|1
Front shock absorber seal failed and leaking oil |2.3.3|1
Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Steering movement excessively `notchy` with the wheel raised |2.2.1b|1
Front Brake disc|s| excessively worn |3.2.A1l|1
Rear Brake disc|s| excessively scored |3.2.A1l|1
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b|1
Rear position lamp adversely affected by the operation of another lamp |1.1.3b|1
Direction indicator affected by the operation of another lamp all |1.5.1c|1
Stop lamp does not illuminate immediately a brake applies front lever |1.3.1a|1
Rear Exhaust is leaking and excessively noisey |7.1.1b|1
Nearside Rear Direction indicator not working |1.5.1c|1
Rear An item not tested |Manual|1
Front Wheel fixing loose (multiple fixings) (5.2.1 (a) (i))1
Front Headlamp aim not tested (4.1.2 (b))1
Rear Stop lamp switch with a delay in operation (4.3.2 (a) (ii))1
Rear Position lamp not working (4.2.1 (a))1
Front Horn not working (7.7 (a))1
Horn not working (7.7 (a))1
Front Brake lever insecure (1.1.2 (e) (i))1
Fuel hose leaking (6.1.3 (b) (i))1
Headlamp light intensity severely reduced bulb is black inside. poor lighting (4.1.4 (a))1
Stop lamp switch with a delay in operation switch rear not working (4.3.2 (a) (ii))1
All direction indicators not working (4.4.1 (a) (ii))1
Front Brake disc significantly and obviously worn (1.1.14 (a) (i))1
Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))1
Rear Wheel bearing has excessive play (5.1.3 (a) (i))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy