Most common failures | No# failures |
---|
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 40 |
Rear reflector on motorcycle missing |1.4.1| | 37 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 34 |
Drive chain excessively loose |6.2.1d| | 27 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 27 |
Headlamp aim out of alignment | 25 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 22 |
Horn not working |1.7.3a| | 19 |
Drive chain worn to excess |6.2.1e| | 18 |
Front wheel bearings have excessive free play |2.3.5b| | 18 |
Registration plate issues | 15 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 15 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 14 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 13 |
Horn not loud enough to be heard by another road user |1.7.3a| | 13 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 12 |
Headlamp insecure |1.2.3b| | 11 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 11 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 10 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 10 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 9 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 8 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 8 |
Exhaust is leaking and excessively noisey |7.1.1b| | 7 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 7 |
Offside Rear Footrest missing |6.2.1a| | 6 |
Direction indicators not working |1.5.1c| | 6 |
Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Nearside Rear Footrest missing |6.2.1a| | 6 |
Nearside Rear Direction indicator insecure |1.5.3b| | 5 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 5 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Throttle operating incorrectly |6.2.1f| | 5 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 5 |
Rear Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 5 |
Front wheel bearings are excessively rough |2.3.5b| | 5 |
Rear Footrest missing |6.2.1a| | 5 |
Fuel cap sealing washer missing |7.2.2c| | 5 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Handlebar deformed |2.1.1b| | 4 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 4 |
Offside Rear Direction indicator not working |1.5.1c| | 4 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 4 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 4 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 4 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 4 |
Nearside Front Direction indicator not working |1.5.1c| | 4 |
Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 4 |
Riders seat insecure |6.2.1a| | 4 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 4 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 3 |
Nearside Rear Direction indicators not working |1.5.1c| | 3 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 3 |
Front Direction indicators affected by the operation of another lamp |1.5.1c| | 3 |
Front Front wheel bearings have excessive free play |2.3.5b| | 3 |
Rear Wheel spoke missing |4.2.1b| | 3 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 3 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
Offside Rear Direction indicators not working |1.5.1c| | 3 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 3 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 3 |
Headlamp dipped beam flickers when tapped lightly by hand |1.2.2c| | 3 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 3 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
Front Drive chain sprocket worn to excess |6.2.1e| | 3 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 3 |
Rear reflector on motorcycle obscured |1.4.1| | 3 |
Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 3 |
Offside Front Direction indicator not working |1.5.1c| | 3 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Nearside Front Steering lock stop missing |2.1.3| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 2 |
Offside Rear Direction indicator deteriorated and function impaired |1.5.3a| | 2 |
Rear Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 2 |
Nearside Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Offside Rear Direction indicator insecure |1.5.3b| | 2 |
Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 2 |
Front Direction indicator not working |1.5.1c| | 2 |
Front Wheel spoke excessively loose |4.2.1b| | 2 |
Headlamp aim not tested |1.6| | 2 |
Nearside Steering lock stop missing |2.1.3| | 2 |
Horn is not a constant note |1.7.3c| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
Steering control handlebar movement restricted by trapped cables |2.1.2c| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 2 |
Offside Front Direction indicator insecure |1.5.3b| | 2 |
Front Brake disc|s| excessively scored |3.2.A1l| | 2 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 2 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Rear Wheel spoke cracked. |4.2.1b| | 2 |
Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
Rear reflector on motorcycle obscured |1.4.2b| | 2 |
Offside Rear Brake pedal cannot be released smoothly |3.1.3d| | 2 |
Nearside Front Direction indicator insecure |1.5.3b| | 2 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Rear Wheel damaged significantly reducing the original strength |4.2.1a| | 2 |
Front Horn not working |1.7.3a| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 2 |
Exhaust mounting missing |7.1.1c| | 2 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 2 |
Brake hose damaged | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
Nearside Direction indicator not working |1.5.1c| | 2 |
Offside Steering lock stop missing |2.1.3| | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Brake pedal pivots excessively worn |3.1.3a| | 2 |
Fuel system component insecure |7.2.1b| | 2 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 2 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 2 |
Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Direction indicator not working |1.5.1c| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Front Brake locking device missing |3.2.A1e| | 1 |
Front suspension assembly component excessively misaligned |2.3.1| | 1 |
Centre Rear Upper Rear reflector on motorcycle missing |1.4.1| | 1 |
Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Front Upper Horn control defective |1.7.2a| | 1 |
Nearside Front Headlamp switch insecure |1.2.4| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Centre Front Fairing so located that it is likely to impede the steering |2.1.2e| | 1 |
Front Upper Headlamp insecure |1.2.3b| | 1 |
Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Front Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Front shock absorber seal failed and leaking oil right hand fork has a leaking seal |2.3.3| | 1 |
Wheel spoke excessively loose broked spokes in the rear wheel |4.2.1b| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride drive chain clip fitted back to front |6.2.1h| | 1 |
Rear suspension bush excessively deteriorated to much movement in the rear shock absorber link |2.4.A2a|i|| | 1 |
Rear wheel bearings have excessive free play rear wheel bearings worn to excess | drivechain side| |2.4.A.2c| | 1 |
Steering movement excessively stiff with the wheel raised headrace bearings stiff |2.2.1b| | 1 |
Steering movement excessively stiff with the weight on the lower bearing headrace bearings stiff |2.2.1a| | 1 |
Brake caliper|s| insecure |3.2.A1j| | 1 |
Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
All position lamps do not illuminate immediately when switched on position lamp bulbs checked ---- fault must be in wiring or switch |1.1.3a| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Horn sounds harsh or grating |1.7.3c| | 1 |
Nearside Front Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
Offside Front Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
Nearside Rear Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
Position lamp switch does not operate the front and rear position lamps |1.1.4c| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Front Direction indicator missing |1.5.1a| | 1 |
Rear Direction indicator missing |1.5.1a| | 1 |
Nearside Front Upper Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Front Upper Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Rear Upper Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Rear Upper Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Centre Front Upper Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Offside Footrest insecure |6.2.1a| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Indicator tell tale not functioning all |1.5.2| | 1 |
Headlamp deteriorated and function impaired high beam tell tell |1.2.3a| | 1 |
Nearside Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Offside Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Brake lever is positioned so that the brake cannot be readily applied fluid pot incorrect position
|3.1.3c| | 1 |
Front Brake master cylinder insecurely mounted incorrectly mounted |3.2.B1a| | 1 |
Drive chain fouling another component fitted incorrect, chain roller defective
|6.2.1d| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking side stand |6.1.1c| | 1 |
Front Direction indicator insecure |1.5.3b| | 1 |
Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Front Front position lamp insecure |1.1.1c| | 1 |
Rear Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Front mudguard can easily contact any fixed point of the motor bicycle. |2.3.7| | 1 |
Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Front Brake hose excessively twisted |3.2.B3a| | 1 |
Front Brake hose fouling |3.2.B3b| | 1 |
Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
Rear Drive chain excessively tight |6.2.1d| | 1 |
Brake hose excessively deteriorated | 1 |
Centre Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Centre Front Lower Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Footrest missing |6.2.1a| | 1 |
Rear Rear position lamp missing |1.1.1a| | 1 |
Front Braking system does not have an approriate system/s fitted according to its age |3.1.1| | 1 |
Front Upper Headlamp switch faulty |1.2.4| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Brake performance not tested |3.3| | 1 |
Rear Brake performance not tested |3.3| | 1 |
Rear Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Drive chain excessively loose |6.2.1d| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Rear Brake component leaking fluid |3.2.B4| | 1 |
Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
Fuel cap sealing washer torn |7.2.2c| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Rear Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Stop lamp does not illuminate immediately a brake applies rear brake control |1.3.1a| | 1 |
Wheel spoke cracked. 3 snapped |4.2.1b| | 1 |
Rear Wheel spoke excessively loose several |4.2.1b| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Chain guard insecure |6.2.1c| | 1 |
Offside Front Brake lever excessively damaged snapped |3.2.A1c| | 1 |
Nearside Rear Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Offside Rear Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Offside Front Brake lever excessively damaged |3.2.A1c| | 1 |
Nearside Front Chain guard insecure |6.2.1c| | 1 |
Brake performance not tested |3.3| | 1 |
Nearside Rear Drive chain worn to excess |6.2.1e| | 1 |
Nearside Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Nearside Front Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Brake lever insecure |3.1.2a| | 1 |
Front Brake pipe excessively chafed |3.2.B2a| | 1 |
Nearside Footrest missing |6.2.1a| | 1 |
Offside Footrest missing |6.2.1a| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Offside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Brake lever attachment screws loose |3.1.2b| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Front Headlamp dipped beam flickers when tapped lightly by hand |1.2.2c| | 1 |
Front Headlamp main beam flickers when tapped lightly by hand |1.2.2c| | 1 |
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Front Brake lever attachment screws loose |3.1.2b| | 1 |
Headlamp switch insecure |1.2.4| | 1 |
Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Horn control defective |1.7.2a| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Rear Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Rear Brake effort inadequate at a wheel |1.2.1 |a| |i|| | 1 |
Rear Rear suspension bush has excessive free play swinging arm |2.4.A2a|i|| | 1 |
Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Rear Stop lamp missing |1.3.3a| | 1 |
Centre Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Centre Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |
Offside Front Steering lock stop missing |2.1.3| | 1 |
Rear Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Offside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Offside Handlebar handgrip missing |2.1.1c| | 1 |
Rear Brake hose leaking fluid |3.2.B4| | 1 |
Offside Rear Direction indicator missing |1.5.1a| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Front Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Front Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii|| | 1 |
Headlamp light intensity severely reduced |4.1.4 |a|| | 1 |
Nearside Rear Footrest missing Pillion footrest missing |6.2.12 |a|| | 1 |
Offside Rear Footrest missing Pillion footrest missing |6.2.12 |a|| | 1 |
Central Rear Suspension arm ball joint excessively worn Shock absorber link bush worn excessively & front section of yoke bolt is not secured correctly through locking nut |5.3.4 |a| |i|| | 1 |
Central Lower Fuel tank insecure Fuel tank mounts missing & side panels insecure |6.1.3 |a| |i|| | 1 |
Riders seat insecure |6.2.5 |a| |ii|| | 1 |
Central Rear Brake pedal not releasing correctly and functionality of brakes affected Brake pedal return spring not correctly fitted |1.1.2 |b| |ii|| | 1 |
Rear Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
Nearside Front Clutch lever positioned so it cannot be readily operated Clutch unit loose on handlebars & able alter position. |6.2.7 |b|| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Rear Wheel spoke excessively bent |4.2.1b| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Stop lamp missing |1.3.3a| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Front shock absorber seal failed and leaking oil Both |2.3.3| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Brake lever pivot has excessive free play |1.1.1 |b|| | 1 |
Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Front Brake caliper inadequately mounted attachment bolt missing |1.1.16 |c| |i|| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Rear Brake pedal cannot be released smoothly return spring missing |3.1.3d| | 1 |
Fuel pipe leaking breather missing |7.2.1a| | 1 |
Nearside Front Direction indicator incorrect colour lens missing |1.5.1b| | 1 |
Drive chain fouling another component |6.2.1d| | 1 |
Front Fork yoke deformed |2.1.1b| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Headlamp insecure (4.1.1 (c)) | 1 |
Fork yoke fractured no steering stop (2.2.2 (d) (i)) | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Fuel system component leaking (6.1.3 (b) (i)) | 1 |
Nearside Brake cable has restricted free movement (1.1.15 (e)) | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Rear Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Steering operation restricted in free movement from lock to lock (2.1.4 (c)) | 1 |
Handlebar deformed to the extent that steering is affected (2.2.1 (c) (ii)) | 1 |
Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Rear Suspension arm mounting has an unsafe modification (5.3.3 (c) (i)) | 1 |
Rear Brake caliper insecure (1.1.16 (c) (i)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Forks excessively deformed (2.2.2 (d) (i)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Stop lamp not working front control (4.3.1 (a) (ii)) | 1 |
Stop lamp not working rear control (4.3.1 (a) (ii)) | 1 |
Nearside Front Direction indicator missing (4.4.1 (a) (ii)) | 1 |
Offside Front Direction indicator missing (4.4.1 (a) (ii)) | 1 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front Brake hose excessively damaged (1.1.12 (b) (ii)) | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Rear Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
Rear Brake caliper operating mechanism has excessive travel (1.1.16 (e) (i)) | 1 |
Rear Brake component modification unsafe Rear pad pin locking device (1.1.21 (d) (i)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Stop lamp remains on when the brakes are released | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Rear Brake cylinder leaking and braking performance affected (1.1.16 (b) (ii)) | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |