Most common failures | No# failures |
---|
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 10 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 8 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Horn not working |1.7.3a| | 6 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 6 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Rear reflector on motorcycle missing |1.4.1| | 5 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Headlamp insecure |1.2.3b| | 4 |
Offside Rear Direction indicator not working |1.5.1c| | 4 |
Drive chain excessively loose |6.2.1d| | 4 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Fuel cap sealing washer missing |7.2.2c| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Nearside Rear Direction indicator not working |1.5.1c| | 3 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 3 |
Headlamp aim out of alignment | 3 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 2 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Drive chain excessively tight |6.2.1d| | 2 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Front Direction indicators not working |1.5.1c| | 2 |
Rear Direction indicators not working |1.5.1c| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Registration plate issues | 2 |
Offside Direction indicators not working |1.5.1c| | 2 |
Rear Wheel spoke cracked. |4.2.1b| | 2 |
Direction indicator not working |1.5.1c| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 2 |
Headlamp aim not tested |1.6| | 2 |
Rear Wheel spoke excessively loose |4.2.1b| | 2 |
Rear Drive chain excessively loose |6.2.1d| | 2 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Front Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Brake hose damaged | 1 |
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Rear Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Rear Brake master cylinder has a seized master cylinder pivot. |3.2.B5| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Front Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Front Stop lamp damaged and function impaired |1.3.3a| | 1 |
Front Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Front Stop lamp missing |1.3.3a| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear reflector on motorcycle obscured |1.4.1| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Brake lever is so short that the brake cannot be readily applied |1.1.2 |d|| | 1 |
Drive chain so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 1 |
Nearside Front All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Offside Rear All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
Direction indicator damaged and function impaired |1.5.3a| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |
Nearside Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Front Headlamp switch faulty |1.2.4| | 1 |
Drive chain fouling another component |6.2.1d| | 1 |
Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Inner Fuel cap sealing washer missing |7.2.2c| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Rear Drive chain excessively tight |6.2.1d| | 1 |
Front Throttle operating incorrectly |6.2.1f| | 1 |
Nearside Steering lock stop missing |2.1.3| | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Centre Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Front Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Offside Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Handlebar deformed |2.1.1b| | 1 |
Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Front Steering lock stop ineffective |2.1.3| | 1 |
Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Rear Brake performance not tested |3.3| | 1 |
Offside Lower Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
Offside Brake pedal insecure |3.1.2a| | 1 |
Nearside Drive chain worn to excess |6.2.1e| | 1 |
Nearside Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Offside Rear Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
Centre Rear Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Front Horn is not continous or uniform |1.7.3c| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
An item not tested |Manual| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Rear Brake lever excessively damaged |3.2.A1c| | 1 |
Brake component defective due to a deliberate modification which significantly reduces the original strength |3.1.5| | 1 |
Front position lamp adversely affected by the operation of the horn |1.1.3b| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Headlamp switch insecure |1.2.4| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |