| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 13 |
| Headlamp aim beam image kick up to the offside |1.6| | 10 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 8 |
| Registration plate lamp issues | 6 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Drive chain excessively loose |6.2.1d| | 4 |
| Rear reflector missing (4.8.2 (a) (ii)) | 4 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Throttle operating incorrectly |6.2.1f| | 3 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
| Front wheel bearings have excessive free play |2.3.5b| | 3 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Headlamp aim not tested |1.6| | 2 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Registration plate issues | 2 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Horn not working |1.7.3a| | 2 |
| Rear reflector on motorcycle missing |1.4.1| | 2 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Offside Handlebar mounting clamp bolt missing |2.1.1a| | 1 |
| Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Brake performance not tested |3.3| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
| Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Nearside Front Steering lock stop maladjusted |2.1.3| | 1 |
| Offside Front Steering lock stop maladjusted |2.1.3| | 1 |
| Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Rear Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
| Handlebar fouling on the fuel tank or bodywork on full lock |2.1.4 |b|| | 1 |
| Steering headbearing in such a condition that steering control is adversely affected |2.2.2 |f| |ii|| | 1 |
| Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Front An item not tested |Manual| | 1 |
| Footrest insecure |6.2.1a| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Rear suspension bearing has excessive free play linkage |2.4.A2a|i|| | 1 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Indicator tell tale not operating correctly |1.5.2| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
| Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
| Offside Front Lower Brake caliper insecure |1.1.16 |c| |i|| | 1 |
| Steering headbearing has excessive free play |2.2.2| | 1 |
| Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Nearside Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Rear Brake disc|s| cracked |3.2.A1g| | 1 |
| Centre Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Forks excessively corroded (2.2.2 (d) (i)) | 1 |
| Forks excessively deformed (2.2.2 (d) (i)) | 1 |
| Nearside Handlebar mounting clamp bolt missing |2.1.1a| | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Stop lamp adversely affected by the operation of another lamp (4.3.3 (b)) | 1 |
| Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Nearside Rear Lower Brake disc contaminated (1.1.14 (b)) | 1 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Front Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
| Stop lamp does not illuminate by the operation of both brake controls Front stop light switch not working (4.3.2 (a) (iii)) | 1 |
| Horn sound not in accordance with requirements (7.7 (c)) | 1 |
| All direction indicators not working rear left originally not working, all indicators now stay on if used no flash rate (4.4.1 (a) (ii)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Rear Brake disc fractured (1.1.14 (a) (ii)) | 1 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |