Most common failures | No# failures |
---|
Headlamp aim out of alignment | 16 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 6 |
Drive chain excessively loose |6.2.1d| | 5 |
Registration plate issues | 5 |
Headlamp aim beam image kick up to the offside |1.6| | 4 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 4 |
Front wheel bearings have excessive free play |2.3.5b| | 4 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Nearside Front Handlebar mounting clamp bolt loose |2.1.1a| | 3 |
Front Front wheel bearings have excessive free play |2.3.5b| | 3 |
Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 3 |
Brake hose excessively deteriorated | 3 |
Fuel system component insecure |7.2.1b| | 3 |
Offside Rear Footrest missing |6.2.1a| | 3 |
Nearside Front Direction indicator not working |1.5.1c| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
Rear Drive chain excessively loose |6.2.1d| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Drive chain excessively tight |6.2.1d| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Offside Handlebar mounting clamp bolt loose |2.1.1a| | 2 |
Nearside Front Footrest insecure |6.2.1a| | 2 |
Headlamp switch faulty |1.2.4| | 2 |
Offside Front Direction indicators not working |1.5.1c| | 2 |
Offside Front Direction indicator insecure |1.5.3b| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Rear Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Offside Front Upper Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Rear Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear reflector on motorcycle obscured |1.4.1| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Fuel cap missing |7.2.2a| | 1 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Nearside Front wheel has a missing wheel nut|s| |4.2.3a| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Horn not working |1.7.3a| | 1 |
Motorcycle structure excessively damaged |6.1.1a| | 1 |
Rear Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Nearside Handlebar mounting clamp loose |2.1.1a| | 1 |
Rear Brake lever excessively damaged |3.2.A1c| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Front Front mudguard insecure |2.3.7| | 1 |
Nearside Front Handlebar deformed |2.1.1b| | 1 |
Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Rear Hydraulic brake control creeps under load. |3.1.4a| | 1 |
Rear Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Hydraulic brake control creeps under load. |3.1.4a| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 1 |
Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Offside Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Offside Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Nearside Front Indicator switch insecure |1.5.4| | 1 |
Offside Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Nearside Headlamp insecure |1.2.3b| | 1 |
Offside Headlamp insecure |1.2.3b| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Leg shield insecure and likely to impede the steering |2.1.2e| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Nearside Indicator tell tale not operating correctly |1.5.2| | 1 |
Nearside Rear Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Position lamp switch insecure |1.1.4b| | 1 |
Drive chain fouling another component |6.2.1d| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front Brake caliper leaking and braking performance affected (1.1.16 (b) (ii)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Front Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Central Front Wheel bearing play so excessive it is likely to break up Both front wheel bearings excessive. (5.1.3 (a) (ii)) | 1 |
Central Rear Wheel bearing has excessive play Both rear bearings excessive (5.1.3 (a) (i)) | 1 |
Offside Rear Lower Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Central Front Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected Two front pinch bolts missing (5.2.1 (c) (ii)) | 1 |
Offside Front Upper Handlebar fractured (2.2.1 (c) (i)) | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Offside Front Upper Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Offside Front Upper Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
Central Rear Lower Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Registration plate lamp issues | 1 |