Most common failures | No# failures |
---|
Headlamp aim out of alignment | 12 |
Front wheel bearings have excessive free play |2.3.5b| | 8 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 5 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 4 |
Headlamp aim beam image kick up to the offside |1.6| | 4 |
Offside Rear Footrest missing |6.2.1a| | 4 |
Nearside Rear Footrest missing |6.2.1a| | 4 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
Fuel system component insecure |7.2.1b| | 3 |
Drive chain worn to excess |6.2.1e| | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Registration plate issues | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Rear Footrest missing |6.2.1a| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Direction indicator not working |1.5.1c| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Horn not working |1.7.3a| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear Brake linkage has abnormal movement due to excessive wear |3.2.A1i| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Rear Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Nearside Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Offside Footrest missing |6.2.1a| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Front mudguard insecure |2.3.7| | 1 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Indicator switch defective |1.5.4| | 1 |
Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Nearside Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Brake cylinder insecurely mounted |3.2.B1a| | 1 |
Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Front Riders seat insecure |6.2.1a| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Nearside Handlebar fractured |2.1.1b| | 1 |
Front wheel spindle securing nut locking device insecure |2.3.3a| | 1 |
Offside Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Outer Front Lower Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Rear Stop lamp damaged and function impaired |1.3.3a| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Offside Rear Lower Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Horn sounds harsh or grating |1.7.3c| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Offside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Centre Rear Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Centre Rear Lower Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Front wheel insecure |4.2.3b| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |