| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 7 |
| Rear reflector on motorcycle missing |1.4.1| | 6 |
| Registration plate lamp issues | 4 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
| Rear Position lamp not working (4.2.1 (a)) | 4 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 3 |
| Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 2 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Rear Footrest missing |6.2.1a| | 2 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 2 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Position lamp not working |4.2.1 |a|| | 1 |
| Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
| Offside Rear Brake caliper insecure One mounting bolt missing, caliper moving when operated |1.1.16 |c| |i|| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Nearside Front Direction indicators not working missing |1.5.1c| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Rear Position lamp not working |4.2.1 |a|| | 1 |
| Nearside Front Direction indicator missing |4.4.1 |a| |ii|| | 1 |
| Offside Front Direction indicator missing |4.4.1 |a| |ii|| | 1 |
| Front Stop lamp not working FRONT BRAKE LEVER |4.3.1 |a| |ii|| | 1 |
| Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
| Nearside Front Direction indicator missing |1.5.1a| | 1 |
| Drive chain worn to excess |6.2.1e| | 1 |
| Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Brake pedal mounting insecure |3.1.2a| | 1 |
| Rear reflector on motorcycle obscured |1.4.2b| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride drive chain spring link fitted incorrectly. |6.2.1h| | 1 |
| Headlamp switch insecure |1.2.4| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Stop lamp does not illuminate immediately a brake applies Rear operated. |1.3.1a| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride Chain clip fitted backwards. |6.2.1h| | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Offside Rear Lower Drive chain sprocket excessively loose (6.1.7 (c) (i)) | 1 |
| Offside Rear Lower Brake fluid reservoir fluid not visible (1.1.10 (d) (iii)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Stop lamp not working from front operation (4.3.1 (a) (ii)) | 1 |
| Stop lamp not working from rear operation (4.3.1 (a) (ii)) | 1 |
| Front Brake cylinder insecurely mounted |3.2.B1a| | 1 |
| Rear Footrest missing (6.2.12 (a)) | 1 |
| Rear Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Front Brake cylinder severely damaged |3.2.B1b| | 1 |
| Drive chain so worn it is likely to fail |6.1.7 |c| |ii|| | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Horn not working |1.7.3a| | 1 |
| Drive chain excessively loose |6.2.1d| | 1 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Registration plate issues | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front Brake fluid contaminated (1.8 (a)) | 1 |
| Offside Front Direction indicators not working missing
|1.5.1c| | 1 |
| Front Horn sound not in accordance with requirements (7.7 (c)) | 1 |
| Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Rear position lamp does not illuminate immediately when it is switched on (1.1.3a) | 1 |
| Front Lower Rear suspension bearing has excessive free play (2.4.A2a(i)) | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Rear Suspension component pin or bush excessively worn mono shock linkarm pivots (5.3.4 (a) (i)) | 1 |
| Rear Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Fuel cap ineffective seal twisted (6.1.3 (b) (i)) | 1 |