>

MOT History from tests of petrol APRILIA RS125s year 2012

Review the list of common APRILIA RS125 failures below or to perform a specific mot history check on your APRILIA then use our popular KnowYourCar service

mot history
Pass percent:69.88%
(The average a petrol APRILIA RS125 year 2012 passes without issue)
Based on:249 MOT Tests
Most common failuresNo# failures
Rear reflector on motorcycle missing |1.4.1|12
Registration plate issues6
Drive chain excessively loose |6.2.1d|6
Registration plate lamp issues6
Drive chain worn to excess |6.2.1e|5
Nearside Handlebar deformed |2.1.1b|3
Stop lamp does not illuminate immediately a brake applies |1.3.1a|3
Fuel cap sealing washer deteriorated |7.2.2c|3
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|3
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|3
Rear reflector missing (4.8.2 (a) (ii))3
Front Roller brake test indicates a binding brake |3.3.A1a|2
Rear reflector on motorcycle obscured |1.4.2b|2
Direction indicators not working |1.5.1c|2
Headlamp incorrect colour |1.2.1|2
Offside Front shock absorber seal failed and leaking oil |2.3.3|2
Offside Rear Footrest missing |6.2.1a|2
Rear Rear reflector on motorcycle missing |1.4.1|2
Rear reflector missing |4.8.2 |a| |ii||2
Rear Drive chain sprocket worn to excess |6.2.1e|2
Headlamp aim out of alignment2
Rear Footrest missing |6.2.1a|2
Rear Rear reflector missing (4.8.2 (a) (ii))2
Nearside Front Direction indicator not working (4.4.1 (a) (ii))2
Front Roller brake test indicates a sticking brake |3.3.A1a|1
Direction indicator flashing more than 120 times per minute |1.5.1c|1
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c|1
Rear Hydraulic brake control feels spongy |3.1.4a|1
Offside Rear position lamp insecure |1.1.1c|1
Offside Handlebar mounting clamp bolt loose |2.1.1a|1
Horn not working |7.7 |a| |ii||1
Rear Valve stem seriously misaligned |5.2.3 |j||1
Central Rear All position lamps do not illuminate immediately when switched on |1.1.3a|1
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b||1
Front Brake disc contaminated |1.1.14 |b||1
Drive chain excessively tight |6.2.1d|1
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Rear Roller brake test indicates a binding brake |3.3.A1a|1
Rear Shock absorber has negligible damping effect |5.3.2 |b||1
Rear Brake pedal is bent and the brake cannot be readily applied |3.1.3c|1
Handlebar deformed |2.1.1b|1
Nearside Front Footrest insecure |6.2.1a|1
Position lamp showing red light to the front |4.2.3 |a| |ii||1
Rear Brake hose leaking |1.1.12 |c||1
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i||1
Floor brake test indicates a binding brake |3.3.C2c|1
Horn is not a constant note |1.7.3c|1
Drive chain excessively loose |6.1.7 |c| |i||1
Rear Rear wheel bearings have excessive free play |2.4.A.2c|1
Rear Drive chain excessively loose |6.2.1d|1
Nearside Position lamp not working |4.2.1 |a||1
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1|1
Front Drive chain sprocket worn to excess |6.2.1e|1
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c|1
Offside Handlebar deformed |2.1.1b|1
Offside Front Direction indicators not working |1.5.1c|1
Offside Rear Direction indicators not working |1.5.1c|1
Front Steering headbearing has excessive free play |2.2.2|1
Nearside Rear Exhaust mounting missing |7.1.1c|1
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Stop lamp does not illuminate immediately a brake applies Front operated. |1.3.1a|1
Stop lamp does not illuminate immediately a brake applies Rear operated. |1.3.1a|1
Rear position lamp does not illuminate immediately when it is switched on Rear. |1.1.3a|1
Direction indicators flashing more than 120 times per minute all |1.5.1c|1
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|1
Front position lamp incorrect colour |1.1.2a|1
Front Stop lamp remains on when the brake is released |1.3.1e|1
Rear Rear reflector missing |4.8.2 |a| |ii||1
Steering control fouling between components which interferes with the free movement of the steering tax disc holder fitted not allowing free movement |2.1.2a|1
Rear Wheel bearing has excessive play |5.1.3 |a| |i||1
Suspension arm pin or bush excessively worn |5.3.4 |a| |i||1
Offside Front Footrest insecure Retaining clip missing from foot peg pin |6.2.1a|1
Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a|1
Rear Drive chain so loose it is likely to fail |6.1.7 |c| |ii||1
Offside Front Direction indicator likely to become detached |4.4.1 |c| |ii||1
Horn not working |1.7.3a|1
Nearside Front shock absorber seal failed and leaking oil |2.3.3|1
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride chain split link horseshoe clip fitted in wrong direction |6.2.1h|1
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride rear sprocket bolt?locking device missing |6.2.1h|1
Brake caliper|s| securing bolt|s| loose both bolts insecure |3.2.A1j|1
Rear Stop lamp not working When Operated By Rear Brake (4.3.1 (a) (ii))1
Front Shock absorber has a serious fluid leak (5.3.2 (b))1
Drive chain excessively loose (6.1.7 (c) (i))1
Rear Stop lamp remains on when the brake is released |1.3.1e|1
Rear Stop lamp not working (4.3.1 (a) (ii))1
Steering headbearing has excessive free play |2.2.2|1
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c|1
Offside Front Position lamp missing (4.2.1 (a))1
Stop lamp not working ON REAR APPLICATION (4.3.1 (a) (ii))1
Stop lamp does not illuminate by the operation of both brake controls Rear brake light switch defective (4.3.2 (a) (iii))1
Front Headlamp not working on dipped beam (4.1.1 (a) (ii))1
Offside Front Shock absorber has a serious fluid leak R/h fork seal excessively leaking (5.3.2 (b))1
Rear Footrest missing Rear L/h and R/h footpeg hangers missing. (6.2.12 (a))1
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))1
Nearside Handlebar mounting insecure (2.2.1 (a) (i))1
Front Position lamp not working (4.2.1 (a))1
Rear Position lamp not working (4.2.1 (a))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy