Most common failures | No# failures |
---|
Headlamp aim out of alignment | 192 |
Rear reflector on motorcycle missing |1.4.1| | 121 |
Registration plate issues | 95 |
Drive chain excessively loose |6.2.1d| | 82 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 52 |
Horn not working |1.7.3a| | 45 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 43 |
Front wheel bearings have excessive free play |2.3.5b| | 40 |
Drive chain worn to excess |6.2.1e| | 38 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 32 |
Front wheel bearings are excessively rough |2.3.5b| | 32 |
Offside Rear Footrest missing |6.2.1a| | 31 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 30 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 29 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 29 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 24 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 23 |
Steering headbearing has excessive free play |2.2.2| | 21 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 19 |
Drive chain excessively tight |6.2.1d| | 19 |
Nearside Rear Footrest missing |6.2.1a| | 18 |
Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 16 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 16 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 16 |
Offside Handlebar mounting clamp bolt loose |2.1.1a| | 14 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 14 |
Headlamp aim beam image kick up to the offside |1.6| | 14 |
Rear reflector missing (4.8.2 (a) (ii)) | 14 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 13 |
Indicator switch insecure |1.5.4| | 13 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 12 |
Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 12 |
Front Front wheel bearings have excessive free play |2.3.5b| | 10 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 10 |
Exhaust is leaking and excessively noisey |7.1.1b| | 10 |
Nearside Front Direction indicators not working |1.5.1c| | 10 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 9 |
Handlebar mounting clamp bolt loose |2.1.1a| | 9 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 9 |
Headlamp insecure |1.2.3b| | 9 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 9 |
Throttle operating incorrectly |6.2.1f| | 9 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 9 |
Rear Footrest missing |6.2.1a| | 9 |
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 9 |
Front Brake disc|s| insecure |3.2.A1g| | 8 |
Nearside Front Direction indicator not working |1.5.1c| | 8 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 8 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 8 |
Rear Rear reflector on motorcycle missing |1.4.1| | 8 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 8 |
Nearside Rear Direction indicator not working |1.5.1c| | 8 |
Rear Position lamp not working (4.2.1 (a)) | 8 |
Brake hose damaged | 7 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 7 |
Front Brake disc|s| excessively worn |3.2.A1l| | 7 |
Offside Front Footrest insecure |6.2.1a| | 7 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 7 |
Direction indicators not working |1.5.1c| | 7 |
Nearside Handlebar deformed |2.1.1b| | 7 |
Offside Front Direction indicator not working |1.5.1c| | 7 |
Nearside Handlebar mounting clamp loose |2.1.1a| | 7 |
Registration plate lamp issues | 7 |
Nearside Front Footrest insecure |6.2.1a| | 6 |
Rear reflector missing |4.8.2 |a| |ii|| | 6 |
Front position lamp incorrect colour |1.1.2a| | 6 |
Offside Handlebar deformed |2.1.1b| | 6 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 6 |
Fairings insecure and likely to impede the steering |2.1.2e| | 6 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 6 |
Nearside Rear Direction indicators not working |1.5.1c| | 6 |
Offside Front Direction indicators not working |1.5.1c| | 6 |
Rear Drive chain excessively loose |6.2.1d| | 5 |
Rear reflector on motorcycle obscured |1.4.1| | 5 |
Offside Rear Direction indicator not working |1.5.1c| | 5 |
Nearside Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 5 |
Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 5 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 5 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 5 |
Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 5 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 5 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 5 |
Fuel system component insecure |7.2.1b| | 5 |
Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 5 |
Offside Rear Direction indicators not working |1.5.1c| | 5 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 5 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 5 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 5 |
Drive chain excessively loose (6.1.7 (c) (i)) | 5 |
Nearside Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 4 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 4 |
Horn not loud enough to be heard by another road user |1.7.3a| | 4 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 4 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 4 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 4 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 4 |
Nearside Front Direction indicator insecure |1.5.3b| | 4 |
Rear Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 4 |
Offside Rear Direction indicator insecure |1.5.3b| | 4 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 4 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 4 |
Front suspension assembly component loose |2.3.1| | 4 |
Rear position lamp insecure |1.1.1c| | 4 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 4 |
Handlebar mounting clamp loose |2.1.1a| | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 4 |
Front Front wheel bearings are excessively rough |2.3.5b| | 4 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 4 |
Front Brake excessively binding (1.2.1 (f)) | 4 |
Rear Brake excessively binding (1.2.1 (f)) | 4 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 4 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 4 |
Offside Front Direction indicator insecure |1.5.3b| | 3 |
Front Drive chain sprocket worn to excess |6.2.1e| | 3 |
Front Brake excessively binding |1.2.1 |f|| | 3 |
Handlebar deformed |2.1.1b| | 3 |
Offside Handlebar mounting clamp loose |2.1.1a| | 3 |
Direction indicator not working |1.5.1c| | 3 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 3 |
Nearside Steering lock stop ineffective |2.1.3| | 3 |
Nearside Rear Direction indicator insecure |1.5.3b| | 3 |
Nearside Front Handlebar mounting clamp bolt loose |2.1.1a| | 3 |
Headlamp switch insecure |1.2.4| | 3 |
Indicator tell tale not functioning |1.5.2| | 3 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 3 |
Front position lamp insecure |1.1.1c| | 3 |
Fuel cap mounting flange/sealing method defective |7.2.2c| | 3 |
Riders seat insecure |6.2.1a| | 3 |
Fuel system component leaking |7.2.1a| | 3 |
Rear Drive chain excessively tight |6.2.1d| | 3 |
Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Offside Rear Footrest insecure |6.2.1a| | 3 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
Brake pedal has inadequate reserve travel |3.1.3b| | 3 |
Front Horn not working |1.7.3a| | 3 |
Rear Brake pedal pivots excessively worn |3.1.3a| | 3 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
Front suspension has inadequate damping effect. |2.3.6c| | 3 |
Rear Position lamp not working |4.2.1 |a|| | 3 |
Horn not working |7.7 |a| |ii|| | 3 |
Drive chain excessively loose |6.1.7 |c| |i|| | 3 |
Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 3 |
Rear Exhaust mounting missing |7.1.1c| | 3 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 3 |
Offside Front Handlebar mounting clamp bolt loose |2.1.1a| | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Headlamp aim not tested |1.6| | 3 |
Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 3 |
Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 3 |
Headlamp deteriorated and function impaired |1.2.3a| | 3 |
Brake pedal pivots excessively worn |3.1.3a| | 3 |
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 3 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 3 |
Drive chain excessively tight (6.1.7 (k) (i)) | 3 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 3 |
Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 3 |
Rear Brake fluid reservoir fluid not visible (1.1.10 (d) (iii)) | 3 |
Front Valve stem seriously damaged (5.2.3 (j)) | 3 |
Offside Rear Footrest missing (6.2.12 (a)) | 3 |