Most common failures | No# failures |
---|
Headlamp aim out of alignment | 38 |
Front wheel bearings have excessive free play |2.3.5b| | 20 |
Front wheel bearings are excessively rough |2.3.5b| | 15 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 14 |
Steering headbearing has excessive free play |2.2.2| | 13 |
Headlamp aim beam image kick up to the offside |1.6| | 12 |
Horn not working |1.7.3a| | 11 |
Drive chain excessively loose |6.2.1d| | 10 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 9 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 8 |
Registration plate issues | 8 |
Rear reflector on motorcycle missing |1.4.1| | 8 |
Drive chain worn to excess |6.2.1e| | 7 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Nearside Rear Direction indicator not working |1.5.1c| | 7 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 7 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 7 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 6 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 5 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 5 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 5 |
Drive chain excessively tight |6.2.1d| | 5 |
Offside Front Footrest insecure |6.2.1a| | 5 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Fuel system component insecure |7.2.1b| | 4 |
Offside Rear Footrest missing |6.2.1a| | 4 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 4 |
Indicator switch insecure |1.5.4| | 4 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 3 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 3 |
Offside Rear Direction indicator not working |1.5.1c| | 3 |
Fairings insecure and likely to impede the steering |2.1.2e| | 3 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
Nearside Steering lock stop ineffective |2.1.3| | 3 |
Centre Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 3 |
Headlamp deteriorated and function impaired |1.2.3a| | 3 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
Offside Front Direction indicators not working |1.5.1c| | 3 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
Rear Footrest missing |6.2.1a| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 3 |
Nearside Rear Footrest missing |6.2.1a| | 3 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 3 |
Nearside Rear Direction indicators not working |1.5.1c| | 3 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 3 |
Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 3 |
Front mudguard insecure |2.3.7| | 2 |
Headlamp aim not tested |1.6| | 2 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
Fork yoke deformed |2.1.1b| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Offside Rear Direction indicator deteriorated and function impaired |1.5.3a| | 2 |
Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 2 |
Brake hose damaged | 2 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Offside Handlebar mounting clamp bolt loose |2.1.1a| | 2 |
Rear suspension component loose |2.4.A.1a| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Fuel pipe leaking |7.2.1a| | 2 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 2 |
Offside Drive chain fouling another component |6.2.1d| | 2 |
Brake pedal pivots excessively worn |3.1.3a| | 2 |
Front position lamp incorrect colour |1.1.2a| | 2 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Rear Brake disc|s| excessively pitted |3.2.A1l| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front mudguard can easily contact the wheel |2.3.7| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Footrest missing |6.2.1a| | 1 |
An item not tested |Manual| | 1 |
Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Headlamp light intensity severely reduced |dip| |4.1.4 |a|| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Rear Brake caliper operating mechanism has excessive travel |1.1.16 |e| |i|| | 1 |
Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride petrol tank insecure. |6.2.1h| | 1 |
Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Front wheel insecure |4.2.3b| | 1 |
Nearside Front Lower Front suspension assembly component missing |2.3.1| | 1 |
Offside Front Lower Front suspension assembly component missing |2.3.1| | 1 |
Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
Front Brake lever attachment screws missing |3.1.2b| | 1 |
Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Rear Brake pedal is inoperative |3.1.3c| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Offside Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Offside Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Centre Front Steering headbearing has excessive free play |2.2.2| | 1 |
Nearside Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Offside Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Fairing so located that it is likely to impede the steering |2.1.2e| | 1 |
Nearside Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Front Brake hose stretched by steering movement |3.2.B3b| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Rear Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
Upper Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Offside Handlebar deformed |2.1.1b| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Rear Rear wheel insecure |4.2.3b| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Offside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Offside Footrest insecure |6.2.1a| | 1 |
Offside Brake pedal pivots excessively worn |3.1.3a| | 1 |
Front Brake lever insecure |3.1.2a| | 1 |
Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Handlebar mounting excessively deteriorated |flexible type| |2.1.1d| | 1 |
Front Brake hose fouling |3.2.B3b| | 1 |
Rear Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Rear Drive chain excessively tight |6.2.1d| | 1 |
Front Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
Front suspension assembly component missing |2.3.1| | 1 |
Brake pedal insecure |3.1.2a| | 1 |
Rear Brake pedal cracked |3.1.2c| | 1 |
Offside Rear Upper Brake linkage has abnormal movement due to excessive wear |3.2.A1i| | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Offside Footrest missing |6.2.1a| | 1 |
Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Brake pipe inadequately supported |3.2.B2b| | 1 |
Front Direction indicator incorrect colour |1.5.1b| | 1 |
Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Rear Brake disc|s| securing bolt|s| loose |3.2.A1g| | 1 |
Rear wheel insecure |4.2.3b| | 1 |
Position lamp switch insecure |1.1.4b| | 1 |
Front Front position lamp does not face the front |1.1.1d| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Offside Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Front Stop lamp missing |1.3.3a| | 1 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Rear Upper Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Offside Drive chain worn to excess |6.2.1e| | 1 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Offside Drive chain excessively loose |6.2.1d| | 1 |
Nearside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Nearside Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Nearside Front suspension assembly component missing |2.3.1| | 1 |
Offside Front suspension assembly component missing |2.3.1| | 1 |
Nearside Rear Brake locking device missing |3.2.A1e| | 1 |
Centre Rear Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Nearside Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Upper Fuel system component leaking |7.2.1a| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Front Horn is not a constant note |1.7.3c| | 1 |
Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Rear Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Front Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Offside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Front Brake locking device missing |3.2.A1e| | 1 |
Rear Stop lamp missing |1.3.3a| | 1 |
Offside Front Brake disc|s| securing bolt|s| loose |3.2.A1g| | 1 |
Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Stop lamp does not illuminate immediately a brake applies front brake lever |1.3.1a| | 1 |
Offside Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Front wheel spindle securing nut locking device insecure |2.3.5a| | 1 |
Brake lever insecure |3.1.2a| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Offside Front Upper Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Front Upper Direction indicator not working |1.5.1c| | 1 |
Nearside Rear Upper Direction indicator not working |1.5.1c| | 1 |
Offside Rear Upper Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Centre Front Upper Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Centre Rear Lower Brake disc|s| excessively worn |3.2.A1l| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Front Brake component leaking fluid |3.2.B4| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Motorcycle structure excessively damaged |6.1.1a| | 1 |
Horn control defective |1.7.2a| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Inner Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Nearside Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
Rear Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Front An item not tested |Manual| | 1 |
Rear Direction indicator insecure |1.5.3b| | 1 |
Direction indicator insecure |1.5.3b| | 1 |
Front Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Upper Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Offside Front Stop lamp damaged and function impaired |1.3.3a| | 1 |
Offside Rear Stop lamp damaged and function impaired |1.3.3a| | 1 |
Offside Rear Drive chain excessively tight |6.2.1d| | 1 |
Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Nearside Rear Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Brake hose leaking (1.1.12 (c)) | 1 |
Steering headbearing in such a condition that steering control is adversely affected (2.2.2 (f) (ii)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected sticking (6.2.7 (a) (ii)) | 1 |
Throttle operating incorrectly loose (6.2.7 (a) (i)) | 1 |