Most common failures | No# failures |
---|
Headlamp aim out of alignment | 34 |
Headlamp aim beam image kick up to the offside |1.6| | 22 |
Registration plate issues | 17 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 16 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 16 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 15 |
Front wheel bearings have excessive free play |2.3.5b| | 12 |
Front wheel bearings are excessively rough |2.3.5b| | 10 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Horn not working |1.7.3a| | 9 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 9 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 7 |
Nearside Front Direction indicator not working |1.5.1c| | 6 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 6 |
Drive chain excessively loose |6.2.1d| | 6 |
Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 5 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 5 |
Nearside Rear Footrest missing |6.2.1a| | 5 |
Fuel system component insecure |7.2.1b| | 5 |
Drive chain worn to excess |6.2.1e| | 5 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 5 |
Throttle operating incorrectly |6.2.1f| | 5 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Headlamp insecure |1.2.3b| | 4 |
Front Headlamp aim beam image kick up to the offside |1.6| | 4 |
Rear reflector on motorcycle missing |1.4.1| | 4 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 4 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Riders seat insecure |6.2.1a| | 3 |
Front Steering headbearing has excessive free play |2.2.2| | 3 |
Front Front wheel bearings have excessive free play |2.3.5b| | 3 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear Drive chain excessively loose |6.2.1d| | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
Fuel system component leaking |7.2.1a| | 3 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 3 |
Brake pedal has inadequate reserve travel |3.1.3b| | 3 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 3 |
Nearside Rear Direction indicator not working |1.5.1c| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Offside Rear Footrest missing |6.2.1a| | 3 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
Offside Rear Direction indicator not working |1.5.1c| | 3 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
Rear reflector missing (4.8.2 (a) (ii)) | 3 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Fuel cap sealing washer missing |7.2.2c| | 2 |
Offside Fairings insecure and likely to impede the steering |2.1.2e| | 2 |
Nearside Front Direction indicator missing |1.5.1a| | 2 |
Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Rear Footrest missing |6.2.1a| | 2 |
Front Direction indicator not working |1.5.1c| | 2 |
Rear Direction indicator not working |1.5.1c| | 2 |
Rear Brake pedal is damaged and the brake cannot be readily applied |3.1.3c| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Drive chain sprocket worn to excess |6.2.1e| | 2 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 2 |
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 2 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 2 |
Nearside Handlebar mounting clamp loose |2.1.1a| | 2 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
Drive chain fouling another component |6.2.1d| | 2 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 2 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 2 |
Nearside Indicator switch insecure |1.5.4| | 2 |
Handlebar mounting clamp bolt loose |2.1.1a| | 2 |
Nearside Rear Direction indicator insecure |1.5.3b| | 2 |
Rear Drive chain worn to excess |6.2.1e| | 2 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Centre Exhaust mounting missing |7.1.1c| | 1 |
Offside Front Direction indicator missing |1.5.1a| | 1 |
Centre Upper Fuel system component insecure |7.2.1b| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Motorcycle structure excessively distorted |6.1.1a| | 1 |
Headlamp missing |1.2.3a| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Offside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Front Brake hose fouling |3.2.B3b| | 1 |
Inner Rear Upper Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Rear mono-shock pivot seized |2.4.B.4| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Brake pedal insecure |3.1.2a| | 1 |
Rear Brake pedal is inoperative |3.1.3c| | 1 |
Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Offside Front Lower Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Offside Front Upper Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Offside Front Upper Fuel pipe leaking |7.2.1a| | 1 |
Rear Brake pipe union leaking fluid |3.2.B4| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Direction indicator incorrect colour |1.5.1b| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Horn missing |1.7.1| | 1 |
Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Nearside Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Rear Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Front Upper Fuel system component insecure |7.2.1b| | 1 |
Offside Front An item not tested |Manual| | 1 |
Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Centre Rear Upper Riders seat insecure |6.2.1a| | 1 |
Centre Front Upper Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
Centre Front Lower Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Offside Rear Lower Drive chain excessively loose |6.2.1d| | 1 |
Offside Rear Lower Drive chain sprocket worn to excess |6.2.1e| | 1 |
Centre Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Rear Lower Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Brake hose damaged | 1 |
Nearside Rear Lower Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Rear Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
Rear Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Rear Stop lamp insecure |1.3.3b| | 1 |
Upper Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Rear Footrest insecure |6.2.1a| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear Brake pipe excessively damaged |3.2.B2a| | 1 |
Nearside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Brake locking device missing |3.2.A1e| | 1 |
Rear An item not tested |Manual| | 1 |
Rear Brake component leaking fluid |3.2.B4| | 1 |
Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Nearside Rear Exhaust mounting missing |7.1.1c| | 1 |
Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Nearside Front Front suspension assembly component missing |2.3.1| | 1 |
Nearside Front Handlebar mounting clamp loose |2.1.1a| | 1 |
Nearside Front Fork yoke deformed |2.1.1b| | 1 |
Front Horn control not functioning. |1.7.2b| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Indicator switch insecure |1.5.4| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Upper Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Front Wheel bearing rough when rotated and slight play |5.1.3 |b| |i|| | 1 |
Front Wheel excessively distorted |5.2.2 |c| |i|| | 1 |
Rear Wheel excessively distorted |5.2.2 |c| |i|| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear wheel insecure |4.2.3b| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Seat insecure |6.2.1a| | 1 |
Headlamp aim not tested |1.6| | 1 |
Offside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Front Horn not working |1.7.3a| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Front Direction indicator incorrect colour |1.5.1b| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
Brake pedal insecure |3.1.2a| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Brake pedal is inoperative |3.1.3c| | 1 |
Front All direction indicators obviously incorrectly positioned (4.4.3 (a)) | 1 |
Rear All direction indicators obviously incorrectly positioned (4.4.3 (a)) | 1 |
Nearside Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Offside Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Rear Brake component modification unsafe Not fitted correctly,may burn on exhaust pipe. (1.1.21 (d) (i)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Offside Front Shock absorber has a serious fluid leak no oil (5.3.2 (b)) | 1 |
Fuel system component leaking (6.1.3 (b) (i)) | 1 |
Front Wheel excessively distorted (5.2.2 (c) (i)) | 1 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |