Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 59 |
Horn not working |1.7.3a| | 48 |
Headlamp aim out of alignment | 31 |
Drive chain excessively loose |6.2.1d| | 28 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 26 |
Registration plate issues | 23 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 15 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 14 |
Exhaust is leaking and excessively noisey |7.1.1b| | 13 |
Nearside Handlebar deformed |2.1.1b| | 13 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 13 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 13 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
Drive chain worn to excess |6.2.1e| | 11 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 10 |
Front wheel bearings are excessively rough |2.3.5b| | 10 |
Drive chain excessively tight |6.2.1d| | 10 |
Offside Front Footrest insecure |6.2.1a| | 9 |
Horn not loud enough to be heard by another road user |1.7.3a| | 8 |
Steering headbearing has excessive free play |2.2.2| | 8 |
Nearside Front Direction indicator insecure |1.5.3b| | 8 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 8 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 7 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 7 |
Nearside Rear Footrest missing |6.2.1a| | 7 |
Rear Footrest missing |6.2.1a| | 7 |
Offside Rear Footrest missing |6.2.1a| | 6 |
Front Drive chain sprocket worn to excess |6.2.1e| | 6 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 6 |
Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 6 |
Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 5 |
Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 5 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 5 |
Offside Footrest insecure |6.2.1a| | 5 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 5 |
Throttle operating incorrectly |6.2.1f| | 5 |
Fuel system component insecure |7.2.1b| | 5 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 5 |
Nearside Front Direction indicator not working |1.5.1c| | 5 |
Offside Handlebar deformed |2.1.1b| | 5 |
Rear reflector missing |4.8.2 |a| |ii|| | 5 |
Front wheel bearings have excessive free play |2.3.5b| | 5 |
Fuel system component leaking |7.2.1a| | 4 |
Rear Direction indicator not working |1.5.1c| | 4 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 4 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
An item not tested |Manual| | 4 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Rear reflector on motorcycle obscured |1.4.1| | 4 |
Offside Front Direction indicator insecure |1.5.3b| | 3 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 3 |
Nearside Direction indicators not working |1.5.1c| | 3 |
Front Direction indicator not working |1.5.1c| | 3 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Offside Front Direction indicators not working |1.5.1c| | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 3 |
Rear shock absorber insecurely mounted |2.4.A.3b| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Fairings insecure and likely to impede the steering |2.1.2e| | 3 |
Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 3 |
Offside Front Direction indicator not working |1.5.1c| | 3 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 3 |
Nearside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 3 |
Nearside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 3 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 3 |
Direction indicators not working |1.5.1c| | 3 |
Offside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 3 |
Offside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 3 |
Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 3 |
Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 3 |
Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 3 |
Nearside Front Footrest insecure |6.2.1a| | 3 |
Indicator switch insecure |1.5.4| | 3 |
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 3 |
Rear reflector missing (4.8.2 (a) (ii)) | 3 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Nearside Rear Direction indicator insecure |1.5.3b| | 2 |
Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Offside Front Direction indicator missing |1.5.1a| | 2 |
Seat insecure |6.2.1a| | 2 |
Offside Rear Direction indicator insecure |1.5.3b| | 2 |
Rear Brake disc|s| cracked |3.2.A1g| | 2 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 2 |
Rear Brake pedal is inoperative |3.1.3c| | 2 |
Drive chain fouling another component |6.2.1d| | 2 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Offside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Rear Drive chain excessively loose |6.2.1d| | 2 |
Rear Brake locking device insecure |3.2.A1e| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Rear wheel rotation likely to be impeded |6.2.1b| | 2 |
Offside Rear Direction indicators not working |1.5.1c| | 2 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Rear mono-shock insecure |2.4.B.4| | 2 |
Nearside Front Direction indicators not working |1.5.1c| | 2 |
Nearside Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
Nearside Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 2 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Upper Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Rear position lamp insecure |1.1.1c| | 2 |
Front Brake disc|s| securing bolt|s| loose |3.2.A1g| | 2 |
Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 2 |
Offside Footrest insecure |6.2.12 |a|| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Front Throttle operating incorrectly |6.2.1f| | 2 |
Rear position lamp obscured more than 50% |1.1.1d| | 2 |
Nearside Direction indicator not working |1.5.1c| | 2 |
Offside Direction indicator not working |1.5.1c| | 2 |
Chain guard insecure |6.2.1c| | 2 |
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Rear Brake disc|s| securing bolt|s| missing |3.2.A1g| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Exhaust excessively deteriorated |7.1.1a| | 2 |
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 2 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Horn not working (7.7 (a) (ii)) | 2 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Drive chain excessively tight (6.1.7 (k) (i)) | 2 |
Nearside Front Direction indicator likely to become detached (4.4.1 (c) (ii)) | 2 |
Fuel tank insecure (6.1.3 (a) (i)) | 2 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 2 |
Registration plate lamp issues | 2 |
Horn not working (7.7 (a)) | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Outer Rear reflector on motorcycle obscured |1.4.1| | 1 |
Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Rear Exhaust system insecure |6.1.2 |a|| | 1 |
Footrest missing rear foot pegs |6.2.1a| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride near side foot rest |6.2.1h| | 1 |
Horn control defective not working |1.7.2a| | 1 |
Rear wheel bearings have excessive free play rear wheel bearing |2.4.A.2c| | 1 |
Rear Brake fluid reservoir severely damaged |3.2.B1b| | 1 |
Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Nearside Steering lock stop maladjusted |2.1.3| | 1 |
Handlebar cracked |2.1.1b| | 1 |
Footrest missing |6.2.1a| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear mono-shock pivot seized |2.4.B.4| | 1 |
Front Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
Rear Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Lower Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Handlebar retaining device missing |2.2.1 |b| |i|| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Clutch lever bent so it cannot be readily operated. |6.2.1g| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Nearside Front All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Front mudguard insecure |2.3.7| | 1 |
Throttle operating incorrectly ENGINE REVS HIGH BY ITSELF WHILE STATIONERY |6.2.1f| | 1 |
Offside Front Motorcycle structure cracked |6.1.1a| | 1 |
Front Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Brake fluid reservoir severely damaged |3.2.B1b| | 1 |
Front Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
Wheel spoke excessively bent |4.2.1b| | 1 |
Fuel cap sealing washer missing |7.2.2c| | 1 |
Exhaust excessively deteriorated Hole in expasion pipe |7.1.1a| | 1 |
Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
Brake locking device insecure |3.2.A1e| | 1 |
Upper Rear mono-shock insecure |2.4.B.4| | 1 |
Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Motorcycle structure cracked |6.1.1a| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Offside Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Footrest missing R & L rear. |6.2.1a| | 1 |
Nearside Rear Drive chain fouling another component |6.2.1d| | 1 |
Nearside Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Brake lever pivots excessively worn |3.1.3a| | 1 |
Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Rear Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Front Direction indicator missing |1.5.1a| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Nearside Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Brake effort inadequate at a wheel |1.2.1 |a| |i|| | 1 |
Front Handlebar restricted in free movement from lock to lock |2.1.4 |c|| | 1 |
Fuel tank leaking |6.1.3 |b| |i|| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Front Brake lever insecure |3.1.2a| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Offside Handlebar mounting clamp loose |2.1.1a| | 1 |
Rear Seat insecure |6.2.1a| | 1 |
Offside Footrest missing |6.2.1a| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front Handlebar deformed |2.1.1b| | 1 |
Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
Nearside Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 1 |
Nearside Front Brake disc insecure |1.1.14 |a| |ii|| | 1 |
Offside Front Brake disc insecure |1.1.14 |a| |ii|| | 1 |
Front Brake master cylinder defective but brake still operating |1.1.10 |b| |i|| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride chain link clip |6.2.1h| | 1 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Offside Rear Footrest insecure no c clip fitted |6.2.1a| | 1 |
Horn sound not in accordance with requirements |7.7 |c|| | 1 |
Nearside Footrest insecure |6.2.12 |a|| | 1 |
Brake caliper insecure pad bolt loose |1.1.16 |c| |i|| | 1 |
Riders seat insecure |6.2.5 |a| |ii|| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies switch |1.3.1a| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Drive chain excessively tight |6.2.1d| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Hydraulic brake control feels spongy |3.1.4a| | 1 |
Centre Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
Fuel system component insecure tank |7.2.1b| | 1 |
Central Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Offside Fairing so located that it is likely to impede the steering |2.1.2e| | 1 |
Nearside Front Steering lock stop ineffective |2.1.3| | 1 |
Offside Front Direction indicator adversely affected by the operation of another lamp |4.4.3 |b|| | 1 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Headlamp not working on dipped beam dip and hi beam wrong way round |4.1.1 |a| |ii|| | 1 |
Nearside Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride foot rest |6.2.1h| | 1 |
Offside Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride foot rest |6.2.1h| | 1 |
Rear Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Front Wheel inadequatly repaired significantly reducing the original strength |4.2.1a| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
Rear Brake pipe union leaking fluid |3.2.B4| | 1 |
Horn control not readily accesible. |1.7.2a| | 1 |
Headlamp switch insecure |1.2.4| | 1 |
Centre Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Centre Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Motorcycle structure excessively distorted |6.1.1a| | 1 |
Rear Brake fluid reservoir insecurely mounted |3.2.B1a| | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Front Front mudguard insecure |2.3.7| | 1 |
Rear Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 1 |
Centre Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear Front wheel bearings are excessively rough |2.3.5b| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Direction indicator missing |1.5.1a| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Nearside Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Rear wheel spindle loose |2.4.A.2b| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Centre Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Offside Front Throttle operating incorrectly |6.2.1f| | 1 |
Offside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Nearside Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Front Brake pipe excessively chafed |3.2.B2a| | 1 |
Front Brake lever cannot be released smoothly |3.1.3d| | 1 |
Vehicle identification number has more than one different number displayed |6.3.5b| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Offside Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Stop lamp not working With front brake |4.3.1 |a| |ii|| | 1 |
Suspension component pin or bush excessively worn S/Arm side play. |5.3.4 |a| |i|| | 1 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Rear Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii|| | 1 |
Front Suspension component pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Drive chain horseshoe locking device incorrectly fitted chain split link |6.1.7 |j| |i|| | 1 |
Rear Suspension arm ball joint excessively worn swinging arm bearings |5.3.4 |a| |i|| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Offside Front Handlebar fouling on the fuel tank or bodywork on full lock |2.1.4 |b|| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Rear Brake disc insecure |1.1.14 |a| |ii|| | 1 |
Central Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Indicator tell tale not functioning TELL TALE NOT FUNCTIONING WHEN NEARSIDE INDICATOR SWITCH IS ACTIVATED |1.5.2| | 1 |
Drive chain horseshoe locking device incorrectly fitted |6.1.7 |j| |i|| | 1 |
Front Fork yoke deformed |2.1.1b| | 1 |
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Front Brake lever pivots excessively worn |3.1.3a| | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Front Brake fluid significantly below minimum mark (1.1.10 (d) (ii)) | 1 |
Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
Offside Front Steering operation impeded by a fairing (2.1.4 (e)) | 1 |
Central Rear Lower Suspension component ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Rear Position lamp light intensity significantly reduced (4.2.3 (a) (ii)) | 1 |
Exhaust system insecure (6.1.2 (a)) | 1 |
Dipswitch does not operate immediately when selected on main beam (4.1.3 (b)) | 1 |
Nearside Clutch lever bent so it cannot be readily operated (6.2.7 (b)) | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Nearside Rear Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |
Rear Footrest missing No footrest fitted (6.2.12 (a)) | 1 |
Fuel cap ineffective fuel cap will not close. (6.1.3 (b) (i)) | 1 |
Rear Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
Nearside Rear Footrest missing (6.2.1a) | 1 |
Offside Rear Footrest missing (6.2.1a) | 1 |
Rear wheel bearings have excessive free play (2.4.A.2c) | 1 |
Rear Seat insecure (6.2.1a) | 1 |
Rear reflector on motorcycle missing (1.4.1) | 1 |
Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h) | 1 |
Rear suspension bush has excessive free play (2.4.A2a(i)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b) | 1 |
Stop lamp not working front or rear brake (4.3.1 (a) (ii)) | 1 |
Drive chain excessively tight, so that it is likely to fail (6.1.7 (k) (ii)) | 1 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Suspension component mounting has an unsafe modification exhaust pipe fouling on spring (5.3.3 (c) (i)) | 1 |
Rear Brake hose excessively twisted pipe fouling on swinging arm stay (1.1.12 (b) (ii)) | 1 |
Rear Upper Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Rear Brake lining(s) less than 1.0 mm thick (1.1.13 (a)) | 1 |
Headlamp insecure (4.1.1 (c)) | 1 |
Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
Offside Front Footrest insecure (6.2.12 (a)) | 1 |
Rear Suspension arm pin or bush excessively worn Swinging arm (5.3.4 (a) (i)) | 1 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Drive chain horseshoe locking device likely to become detached (6.1.7 (j) (ii)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
Rear Lower Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |