| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 22 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 18 |
| Registration plate issues | 13 |
| Headlamp aim beam image kick up to the offside |1.6| | 11 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
| Stop lamp remains on when the brake is released |1.3.1e| | 7 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 6 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
| Rear Footrest missing |6.2.1a| | 6 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
| Drive chain excessively loose |6.2.1d| | 6 |
| Horn not working |1.7.3a| | 6 |
| Front wheel bearings have excessive free play |2.3.5b| | 6 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 5 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 5 |
| Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 5 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
| Nearside Front Direction indicators not working |1.5.1c| | 4 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 4 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 4 |
| Front wheel bearings are excessively rough |2.3.5b| | 4 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
| Nearside Front Direction indicator not working |1.5.1c| | 4 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
| Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 3 |
| Headlamp deteriorated and function impaired |1.2.3a| | 3 |
| Fuel system component insecure |7.2.1b| | 3 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
| Front suspension has inadequate damping effect. |2.3.6c| | 3 |
| Brake hose damaged | 3 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 3 |
| Offside Steering lock stop ineffective |2.1.3| | 3 |
| Indicator switch insecure |1.5.4| | 3 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
| Headlamp switch insecure |1.2.4| | 3 |
| Nearside Rear Footrest missing |6.2.1a| | 3 |
| Nearside Front Direction indicator insecure |1.5.3b| | 3 |
| Offside Handlebar deformed |2.1.1b| | 3 |
| Rear Position lamp not working (4.2.1 (a)) | 3 |
| Headlamp aim beam image kick-up is to the offside |1.6.1| | 2 |
| Rear shock absorber insecurely mounted |2.4.A.3b| | 2 |
| Rear Drive chain excessively loose |6.2.1d| | 2 |
| Headlamp light intensity severely reduced |4.1.4 |a|| | 2 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 2 |
| Riders seat insecure |6.2.1a| | 2 |
| Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 2 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Front Riders seat insecure |6.2.1a| | 2 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Brake pedal pivots excessively worn |3.1.3a| | 2 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
| Nearside Steering lock stop ineffective |2.1.3| | 2 |
| Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
| Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 2 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
| Offside Rear Footrest missing |6.2.1a| | 2 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Fuel system component leaking |7.2.1a| | 2 |
| Nearside Handlebar deformed |2.1.1b| | 2 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 2 |
| Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
| Front suspension assembly component missing |2.3.1| | 2 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
| Centre Front Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Registration plate lamp issues | 2 |
| Exhaust mounting does not fully support the exhaust system (7.1.1.c) | 2 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Rear reflector on motorcycle missing |1.4.1| | 1 |
| Drive chain excessively tight |6.2.1d| | 1 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Offside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Nearside Front Steering lock stop maladjusted |2.1.3| | 1 |
| Front Fairing so located that it is likely to impede the steering |2.1.2e| | 1 |
| Brake pedal mounting insecure |3.1.2a| | 1 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Front shock absorber seal failed and leaking oil right hand side fork seal |2.3.3| | 1 |
| Nearside Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Nearside Rear Lower Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
| Nearside Front Steering lock stop ineffective |2.1.3| | 1 |
| Nearside Front Footrest insecure |6.2.12 |a|| | 1 |
| Riders seat insecure |6.2.5 |a| |ii|| | 1 |
| Front Position lamp not working |4.2.1 |a|| | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Offside Throttle operating incorrectly |6.2.1f| | 1 |
| Footrest insecure L/Hand footrest hanger cracked |6.2.1a| | 1 |
| Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars L/Hand handlebar bent,traps hand |2.1.2b| | 1 |
| Offside Front Direction indicator insecure |1.5.3b| | 1 |
| Nearside Front Handlebar deformed |2.1.1b| | 1 |
| An item not tested |Manual| | 1 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Upper Steering headbearing has excessive free play |2.2.2| | 1 |
| Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
| Indicator switch defective |1.5.4| | 1 |
| Rear Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Nearside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Offside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Offside Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Front Upper Brake master cylinder severely damaged |3.2.B1b| | 1 |
| Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Centre Rear Stop lamp missing |1.3.3a| | 1 |
| Rear position lamp insecure |1.1.1c| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Offside Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Nearside Footrest insecure |6.2.1a| | 1 |
| Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
| Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Fuel system component insecure fuel tank |7.2.1b| | 1 |
| Nearside Rear reflector on motorcycle missing |1.4.1| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Offside Direction indicators not working |1.5.1c| | 1 |
| Offside Indicator tell tale not functioning |1.5.2| | 1 |
| Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
| Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Offside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Steering headbearing has excessive free play |2.2.2| | 1 |
| Drive chain fouling another component |6.2.1d| | 1 |
| Steering damper in such a condition that the steering action is impaired. |2.1.2d| | 1 |
| Brake pedal insecure |3.1.2a| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Front Brake component leaking fluid |3.2.B4| | 1 |
| Nearside Lower Motorcycle structure cracked |6.1.1a| | 1 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Footrest missing |6.2.1a| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Nearside Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Fairing insecure and likely to impede the steering |2.1.2e| | 1 |
| Front suspension assembly component loose |2.3.1| | 1 |
| Rear Plate brake test indicates a binding brake |3.3.B1a| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Fuel pipe leaking |7.2.1a| | 1 |
| Handlebar deformed right handlebar bent |2.1.1b| | 1 |
| Rear Brake pedal insecure |3.1.2a| | 1 |
| Nearside Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Offside Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Front Direction indicator missing |1.5.1a| | 1 |
| Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Offside Rear Exhaust mounting missing |7.1.1c| | 1 |
| Direction indicator not working |1.5.1c| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Front Front suspension assembly has an insecure fork brace |2.3.4d| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
| Front wheel spindle securing nut locking device insecure |2.3.5a| | 1 |
| Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Nearside Front Direction indicator missing |1.5.1a| | 1 |
| Offside Front Direction indicator missing |1.5.1a| | 1 |
| Front Footrest insecure |6.2.1a| | 1 |
| Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Handlebar mounting clamp loose |2.1.1a| | 1 |
| Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Headlamp switch faulty |1.2.4| | 1 |
| Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Nearside Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Rear position lamp insecure |1.1.1c| | 1 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Offside Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Offside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Nearside Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Nearside Drive chain worn to excess |6.2.1e| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Drive chain worn to excess |6.2.1e| | 1 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Offside Front Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Front Direction indicators not working |1.5.1c| | 1 |
| Rear Direction indicators not working |1.5.1c| | 1 |
| Offside Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
| Front Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
| Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
| Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Front Headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Nearside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Offside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Offside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| All direction indicators not working not flashing. (4.4.1 (a) (ii)) | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
| Offside Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Brake lever attachment screws missing (3.1.2b) | 1 |
| Front suspension assembly component missing front spindle security bolt missing (2.3.1) | 1 |
| Handlebar mounting clamp loose left hand side (2.1.1a) | 1 |
| Front Front mudguard insecure (2.3.7) | 1 |
| Chain guard insecure front sprocket chain guard (6.2.1c) | 1 |
| Rear shock absorber has inadequate damping effect. (2.4.A.3b) | 1 |
| Footrest missing passenger footrests missing (6.2.1a) | 1 |
| Rear wheel spindle securing nut locking device missing (2.4.A.2b) | 1 |
| Fairings insecure and likely to impede the steering (2.1.2e) | 1 |
| Front shock absorber seal failed and leaking oil (2.3.3) | 1 |
| Rear position lamp insecure (1.1.1c) | 1 |
| Headlamp at least one does not illuminate on dipped beam (1.2.2a(i)) | 1 |
| Offside Direction indicators flashing more than 120 times per minute (1.5.1c) | 1 |
| Nearside Rear Direction indicator not working (1.5.1c) | 1 |
| Front Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 1 |
| Offside Rear Direction indicators not working (1.5.1c) | 1 |
| Horn not working (1.7.3a) | 1 |
| Exhaust mounting missing (7.1.1c) | 1 |
| Lower Rear suspension bush has excessive free play (2.4.A2a(i)) | 1 |
| Drive chain excessively tight loosened (6.1.7 (k) (i)) | 1 |
| Fuel system component leaking (6.1.3 (b) (i)) | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |