| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 25 |
| Registration plate issues | 22 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 14 |
| Rear reflector on motorcycle missing |1.4.1| | 10 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
| Headlamp aim beam image kick up to the offside |1.6| | 9 |
| Horn not working |1.7.3a| | 8 |
| Drive chain excessively loose |6.2.1d| | 7 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
| Offside Rear Footrest missing |6.2.1a| | 6 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Stop lamp remains on when the brake is released |1.3.1e| | 5 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 4 |
| Drive chain worn to excess |6.2.1e| | 4 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
| Direction indicators not working |1.5.1c| | 3 |
| Handlebar deformed |2.1.1b| | 3 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 3 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
| Drive chain excessively tight |6.2.1d| | 2 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Stop lamp not working |4.3.1 |a| |ii|| | 2 |
| Front suspension has inadequate damping effect. |2.3.6c| | 2 |
| Nearside Rear Direction indicator not working |1.5.1c| | 2 |
| Stop lamp remains on when the brakes are released | 2 |
| Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 2 |
| Nearside Front Direction indicators not working |1.5.1c| | 2 |
| Offside Rear Direction indicators not working |1.5.1c| | 2 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Rear Brake pedal pivots excessively worn |3.1.3a| | 2 |
| Front Headlamp deteriorated and function impaired |1.2.3a| | 2 |
| Steering headbearing has excessive free play |2.2.2| | 2 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
| Offside Handlebar deformed |2.1.1b| | 2 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 2 |
| Fuel system component leaking |7.2.1a| | 2 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 2 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Nearside Rear Footrest missing |6.2.1a| | 2 |
| Riders seat insecure |6.2.1a| | 2 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Position lamp switch does not operate the front and rear position lamps |1.1.4c| | 1 |
| Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Front Stop lamp missing |1.3.3a| | 1 |
| Front Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Indicator switch insecure |1.5.4| | 1 |
| Position lamp switch insecure |1.1.4b| | 1 |
| Front All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Nearside Steering lock stop ineffective |2.1.3| | 1 |
| Front Brake disc|s| excessively pitted |3.2.A1l| | 1 |
| Rear Brake disc|s| excessively pitted |3.2.A1l| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Rear Brake pedal attachment screws loose |3.1.2b| | 1 |
| Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Rear Brake pedal mounting insecure |3.1.2a| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| An item not tested |Manual| | 1 |
| Front Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
| Nearside Front Handlebar mounting clamp loose |2.1.1a| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Nearside Front Direction indicator insecure |1.5.3b| | 1 |
| Offside Front Direction indicator insecure |1.5.3b| | 1 |
| Front Fuel cap does not fasten securely by a positive means |7.2.2b| | 1 |
| Front Riders seat insecure |6.2.1a| | 1 |
| Nearside Front Handlebar deformed |2.1.1b| | 1 |
| Offside Front Handlebar deformed |2.1.1b| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Rear Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
| Front Brake fluid reservoir insecurely mounted |3.2.B1a| | 1 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Front Throttle operating incorrectly |6.2.1f| | 1 |
| Nearside Front Steering lock stop ineffective |2.1.3| | 1 |
| Front Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Offside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Nearside Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Offside Direction indicators not working |1.5.1c| | 1 |
| Front Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 1 |
| Nearside Headlamp light intensity severely reduced |4.1.4 |a|| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Brake linkage excessively damaged |3.2.A1c| | 1 |
| Front Direction indicators not working |1.5.1c| | 1 |
| Rear Direction indicators not working |1.5.1c| | 1 |
| Offside Indicator switch insecure |1.5.4| | 1 |
| Rear All position lamps not working |4.2.1 |a|| | 1 |
| Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
| Nearside Front Upper Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Nearside Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Offside Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
| Nearside Front Front position lamp missing |1.1.1a| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Nearside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Centre Front Lower Fairings so located that it is likely to impede the steering |2.1.2e| | 1 |
| Outer Rear Lower Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Front Footrest insecure |6.2.1a| | 1 |
| Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Nearside Rear Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Nearside Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Front Brake hose fouling |3.2.B3b| | 1 |
| Centre Lower Exhaust mounting missing |7.1.1c| | 1 |
| Direction indicator incorrect colour |1.5.1b| | 1 |
| Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear Brake master cylinder has a seized master cylinder pivot. |3.2.B5| | 1 |
| Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
| Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
| Front Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
| Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
| Nearside Front Footrest insecure circlip missing |6.2.1a| | 1 |
| Offside Front Footrest insecure circlip missing |6.2.1a| | 1 |
| Brake hose is likely to be fouled or trapped by moving parts rear brake reservoir hose rubbing on chain |3.2.B2c| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Rear Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Front Motorcycle structure excessively distorted |6.1.1a| | 1 |
| Nearside Handlebar mounting clamp loose |2.1.1a| | 1 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking rear sub frame mounting bolt missing |6.1.1c| | 1 |
| Rear position lamp insecure |1.1.1c| | 1 |
| Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Rear Brake hose damaged and likely to fail (1.1.12 (a)) | 1 |
| Rear Stop lamp not working Rear switch missing (4.3.1 (a) (ii)) | 1 |
| Rear Footrest missing (6.2.12 (a)) | 1 |
| Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Front Brake disc contaminated (1.1.14 (b)) | 1 |
| Clutch lever positioned so it cannot be readily operated (6.2.7 (b)) | 1 |
| All direction indicators adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
| Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
| Registration plate lamp issues | 1 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Rear Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Nearside Rear Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
| Central Rear Position lamp not working (4.2.1 (a)) | 1 |